6.5” 400W Max Motorsport Midrange Speakers (MSPRO65)

These speakers are nice and loud !!!!!

The media could not be loaded. You can hear it at 100 plus clear as day,best sound I've had yet.Speakers are a little bit larger for the speaker enclosure 2017 road glidebut they fit you just have to be able to do a small modification.

*2023 Update. Speakers Failed."Waterproof" cone deteriorated from weather.*2022. I wasn't able to get sufficient sound out of polk mm625s. Radio was upgraded to soundstream hdhu14. Amp NVX vadm4 (fronts and rears bridged for L&R) 200w rms going to each speaker, I needed these mspro65s and they handle that fine.Speakers sound like your listening to sound from a live band instead of a radio. They handle full volume without clipping and are very loud at highway speed. Local traffic I limit volume to 60 to 70%, system is that loud now.Installation, the speaker will fit in original roadglide speaker pod with a slight modification.1) Harleys speaker pod has an alignment nub on mounting face that needs to be removed with razor knife.2) with the speaker placed into mounting hole and 1 screw Partially screwed in you will see that the speaker does not sit flush. You will need to carefully use a heat gun (No torch) to heat the side of the speaker pod while using mild pressure on the speakers Trim Ring only(Do not touch the speaker cone).As the side of the speaker pod softens and the speaker becomes closer to flush with the mounting face install 3 remaining speaker mounting screws. Gradually tighten these screws down as you are heating side of speaker pod until speaker is flush.The speaker pod distortion is less than 1/2 overall and does not cause any contact with outer fairing when reinstalled.Repeat procedure on other side.Your original speaker grilles will fit exactly as before.

Love them