– Wash and Cure 3 Station, 2 in 1 Wash & Cure Machine for ANYCUBIC Photon Mono Mars LCD/SLA/DLP Resin 3D Printing Models with Dual Cleaning Modes and Uniform Curing, Washing Size 165x100x180mm³

Anycubic Wash and Cure v2.0 I've been resin printing now for almost three years, and I have tried most options available when it comes to cleaning and curing resin prints a lot are messy and a lot take up a lot of space. Not the Anycubic Wash and Cure 2.0. The Wash and Cure V2.0 is by far my favourite method so far its quick, simple and clean to use. Before i was using a 3L ultrasonic and a UV nail lamp box and although they gave good results they didn't have the convenience and cleanliness of the Wash and Cure V2.0. The construction seems solid with a metal base plate rather than plastic. The UV array works well with a decent cure speed while also having a turntable rotate at a decent speed with no stuttering. Resulting in a nice even cure across the model with very little effort from the user. Its also roughly the same size as Photon so doesn’t fill up your workspace. The cure container is large enough to fit the build plate with a full height print attached but can also be used with the basket provided for loose prints if required/wanted. It has a secure sealed lid also to prevent spills and evaporation of your cleaning agent. To cure on the plate you will require roughly 3.5L of your chosen cleaning agent (personally I use Isopropyl Alcohol). Models I’ve cleaned so far have no signs of white residue, glossy patches or sticky patches and I’ve been using a wash time of 15mins and cure time of 4 mins (wash time could probably be reduced but I’m in no rush and prefer to make sure they are clean) Controls are really simple and effective. 1 button to swap between wash and cure and a dial to alter time and start the cycle off. Overall I was sceptical coming in to this product but have been blown away by the ease and cleanliness of the process and the quality of the product Anycubic has produced. It is easily the best post processing solution I’ve used and well worth the price tag even at full RRP. Don’t waste your money buying all the others just buy one of these and be happy with the mess free simple process.

When I first got into resin 3D printing, I figured a couple of plastic tubs and some sunlight could be enough to handle the washing and curing process. Spoiler alert: i was deluded and it really was not! My workspace smelled like an industrial accident, my prints always had sticky residue, and curing under a lamp felt like a guessing game. I probably stank of chemicals too! Enter the ANYCUBIC Wash and Cure 3 Plus Station, the machine that single-handedly saved me from resin chaos at a surprisingly decent price. Right out of the box, this thing looked serious. Bigger than the older models, which meant I could finally clean and cure larger prints without awkwardly flipping them halfway through. The washing function is a game-changer. Just drop the print in, set the timer, and let the vortex of isopropyl alcohol do its thing. No more swirling prints around by hand like I am making a resin cocktail. Everything comes out way cleaner, and I do not have to dunk my hands into chemical soup anymore. The curing process is just as smooth. The upgraded size means I can cure bigger prints without weird shadows or missed spots. The UV lights are powerful and evenly distributed, so I no longer have to do the awkward spin-and-hope method under a desk lamp. Plus, the rotating platform makes sure every angle gets hit properly. If I had to nitpick, I would say the machine is not exactly whisper-quiet, but considering the alternative of manually scrubbing and curing prints like it is the Dark Ages, I will take a little background noise. Also, resin printing is already a messy hobby, so you still need to keep your workstation clean, but this definitely cuts down on the hassle. After using this, I cannot imagine going back to my old DIY wash-and-cure setup. It saves me time, keeps my prints looking flawless, and makes the whole post-processing step feel way less like a chore. If you are into resin 3D printing and want to upgrade your workflow, this is absolutely worth it.

Game changer for resin printers, you need this, right now if your working with resin, cuts down exposure time, cleans effectively and efficiently, would have bought this with the printer if I knew. Thank you.

This is a fantastic product - does everything you need it to and saves a lot of time and mess! My only complaint is that when curing, the plate sometimes jerks when starting meaning that small or poorly balanced parts can fall off the plate/move into each other/tip over.