Question 1

Will this work over Minwax polyurethane (oil based).  i see it wont react well with oil based stain so i applied poly over the stain. thoughts?

Accepted Answer

epoxy can go over them in about 24 hours. OIL BASED paints take a LONG time to fully dry. If an oil-based paint is used, you must apply 3 coats of oil-based polyurethane to seal the surface before applying a seal coat of our UltraClear epoxy. If you go directly over the oil-based paint and it is not completely dry, you run the risk of the epoxy not sticking to the surface and peeling off months later.

Question 2

how many square feet does it cover

Accepted Answer

You can calculate volume needed IN OUNCES using the following formula:
Length X Width  X  Thickness  X  .55411
Length, width & thickness are in inches. 
If you have an area that's 20 by 15 inches, that area is 300 square inches.
If you want a covering that's 1/8 of an inch thick, 1 divided by 8 = .125 inches.
300  X  .125   X   .55411  = 20.78  ounces.
I typically add 10% to play it safe.

Question 3

will sealing bare wood surface prevent bubbles forming?

Accepted Answer

The product should be applied in two stages. The first stage is referred to as the seal coat. The seal coat is a small batch of epoxy that is brushed on in a thin layer to seal any pores in the surface and prevent air bubbles from forming in the following flood coat. Our epoxy is used for both your seal coat and your flood coat.

Question 4

I want to make a coffee table that the epoxy goes to the edge of. What materials can be used to make a mold that the cured epoxy would release from?

Accepted Answer

I use plastic Scotch tape all the time, and I think it works the best. However, if you dam the edges, you will wind up with a thick layer of epoxy around the edge of your table. You can also tape the bottom edge of the table, pour and let it run off, smooth the edges and then all you have to do is peel the tape off the underside and you'll have protected, smooth edges. Good luck!

ASIN	B01LYK2NAG
ASIN	B01LYK2NAG
Additional Features	Compact Design
Best Sellers Rank	#98,698 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #171 in Epoxy Adhesives
Brand Name	PROMISE EPOXY
Color	Clear Crystal
Customer Reviews	4.4 4.4 out of 5 stars (21,358)
Customer reviews	4.4 4.4 out of 5 stars (21,358)
Date First Available	5 July 2016
Is Discontinued By Manufacturer	No
Item Dimensions	25.4 x 25.4 x 12.7 centimeters
Item Weight	454 g
Item model number	CECOMINOD097661
Manufacturer Part Number	PTT1GK-CAN
Material Type	Epoxy Resin
Model Number	CECOMINOD097661
Number of Pieces	1
Product Dimensions	25.4 x 25.4 x 12.7 cm; 453.59 g
Unit Count	1 Count

Pro Marine Supplies Crystal Clear Bar Epoxy Resin Coating Table Top - 1 Gallon Kit

Details

Details

Description

Specifications

Common Questions