VVIVID Epoxy High Gloss Carbon Vinyl Automotive Wrap Film DIY Easy to Install No Mess (1ft x 5ft, Black)

My order arrived quickly and as described. The actual product consists of three layers: a thin, clear protective layer, the actual faux carbon fiber vinyl, and a white paper backing. When unrolling the product, you'll find that the product will want to spring back into the curled form quite aggressively, so much so that the clear film will crinkle and separate from the vinyl in places. Don't worry, as this is completely normal and the vinyl is what is important, not the film or backing. The vinyl itself was very impressive. I've worked with quite a few vinyl appliques, and this one seems to be of very good quality (though I'll reserve my final decision for when it's been on the car for an extended period). Application was straightforward and I found that I could get away with applying it to fairly complex parts without having to resort to window film spray, though on larger pieces I would definitely recommend it. Once the film was in place, some gentle application of heat with a heat gun set it in place and allowed it to conform perfectly to the piece. Running a soft cloth over the surface helped to set it in place and press it into small recesses. In sunlight, this product really stands out. Light will reflect from the "carbon fibers" in a highly realistic fashion. I am exceptionally happy with the look and have high hopes that it remains durable for years to come.

Good product

Not to bad looks good for being a wrap the gloss has a good finish once you add heat it’s easy to work with but no heat it’s harder of course

Use heat!!! It's in the instructions. Half of the negative reviews are because of user error. The adhesive is heat activating. This is by far the most realistic carbon vinyl I've ever seen, and it's great to work with. Held up for a year before I eventually took it off for re wrapping a different color.

I build Estes rockets for fun and wanted to finish one differently other than painting it and used this vinyl. Very easy to apply.

Product looks ok, not as good as I was expecting based on other reviews. The self adhesive did not work for me as it kept wanting to peel off interior plastic trim. I had to use contact cement to get it to stick well.

Product is no good the adhesive is terrible it’s peeling off after a day off installation. Im very disappointed because it looked so good after installing. Also it bubbled a lot after installing. The corners shrunk a little bit in the areas i stretched the material so in the pictures you will see it not covering the whole thing because of it.

I have used this carbon vinyl along with so many others to compare, Scott elemento 6 and the tech art gloss, 3m Dinoc, oracal, etc... Don’t listen to people who say this vinyl isn’t good. It’s all user error. There’s an art to application, it is very thick but it can conform to curvy surfaces and hard to wrap pieces. The adhesion is not an issue. Use a clean microfiber and isopropyl alcohol, minimize dust. Clean all the edges and everywhere you think you wouldn’t even touch. If you’re wrapping interior trim, take it out of the car. Take your time, make sure you have a fresh blade at all times. Do not overheat it. Peel the protective layer off the top. The vinyl really pops when it is applied to curved surfaces. When you lay it down, don’t tack down a spot until you are ready to apply “glass”. Watch CK wraps for tips to make your vinyl wrapping experience better. This has fantastic air egress. Hit it quickly with the heat gun and use the squeegee to flatten it, do not flatten “fingers” or you’ll get wrinkles, rookie mistake. I did the entire C5 s6 trim for $22. You can’t beat the depth and gloss of this stuff. DO NOT USE IT OUTSIDE. It’s for indoor use only!

Caché très bien fait une belle finition

No batallamos para forras los bo, súper recomendado 😍

Really happy with this carbon wrap. Used a heat gun to wrap carbon around door handle, easy to use and looks great!

Check out a few DIY guides on youtube before trying it out. It'll save you a lot of money.

Only giving this 4 stars from r now as I just used some on a few interior parts of my truck. We Will see how it holds up. If it holds up well we’ll definitely be back to upgrade to 5 stars. Product is very easy to work with. I’m a first timer on wrapping and it went pretty well. Has to do some parts a few times has my hand slipped and I over cut the vinyl. The product stretches very well as long as you add some heat. This is the cheapest way to see if you have what it takes to wrap. I would recommend this to anyone who is interested.