EleTab Dual Monitor Mount Stand - Height Adjustable Monitor Arm Stand Fully Articulating Counterbalance Gas Spring Desk Mount for Two 17 to 32 inch Screens

Same as descriptions product good product 👍🏻

Its good and great quality it help me much

تم الشراء بتاريخ 18.2.2022 المنتج جيد جدا بالجودة و عيبه الوحيد لايمكن رفع الشاشة الى اعلى و انا استخدم شاشتين سامسونج 28 انش عدد اثنين

Took me 15 minutes to fix and place both screens, easy to install.

Great built quality. Love it

I purchased "EleTab Dual Monitor Mount Stand - Height Adjustable Monitor Arm Stand Fully Articulating Counterbalance Gas Spring Desk Mount for Two 17 to 32 inch Screens" model ELTGM05-2 but this seller sent me New star model 91-LDT13C024, which looks like the same but with different specifications and different manufacturer

Does not fit the monitor, bad quality, don’t buy. Bad service . I have called multiple times for Amazon to pickup. They came once and said they will come to pick up again. After calling multiple times now they say they will not pickup and if I want a refund I have to drive 50km to drop it. Bad bad service from Amazon and bad product

The product is fine but it was a different model and company not as mentioned in the title of the product.

This was my first desk-mounting monitor stand and I am very glad that I chose this one. It's not the cheapest on the market, but it's definitely worth what you pay for it. It's easy to put together and easy to adjust once you mount the monitors on it. I don't know if this is typical of these types of monitor stands, but it's very difficult to adjust the arms until you add the weight of the monitor to the ends of them. Each arm has two joints that can move and the tension in the arms is easily adjustable with an included hex wrench. I recently replaced my two old 24" monitors with 27" monitors and had to increase the tension and this was a breeze. Moving the arms is pretty easy, although I have noticed that sometimes it can cause slight shifting in the base with the clamp setup. The heads can rotate as well to accommodate a vertical monitor setup. This came in handy for me because I bought the HP Omen 27" which has its VESA mount in an odd diamond pattern, making it require a 45 degree offset. The motion for this is quite smooth. Replacing my monitors was especially easy because there is a removable VESA 75 and 100 compatible plate that you put on your monitor. This plate slides onto the head and sits with a screw securing it on the top. Because these are removable, I was able to simply unscrew the securing screw, slide off my monitors, unscrew the bracket, replace the bracket on my new monitors, slide it on the heads of the arms, and then rescrew the securing screw. I did have to adjust the arms to a wider stance because they were larger and tighten up the tension in the arms. The arms also have wire management sleeves that slide on and off pretty easily. I have a power cable and 2 display cables coming from each of my monitors and they fit very snugly under these sleeves, I doubt I could fit another one under those sleeves. It is worth noting that with this many cables, it is difficult to rotate my monitors more than about 45 degrees. If I wanted to do so, I would probably need to pull more cable slack on the monitor's end to accommodate this. The base comes with a grommet mounting set up and a clamp setup. I don't have a grommet in my desk so I chose the clamp setup and it was easy to put together. The clamp comes with a pad on it and the set comes with a few rubber pieces that adhere to the top part of the base to protect your desk. I moved my mount setup twice now and found no damage to the top of my desk, but a little bit of scuffing on the bottom, which is fine with me. There is a small wire management piece on the back which has two stiff tabs that hold cables in place, one basically for each arm. It was pretty difficult to fit 3 cables under each tab and I doubt I could fit another without snapping the tab. Overall, very happy with this mount. I've had it just over a year now and have had zero problems with it other than the small issues described above, which are really mild inconveniences.

The monitor arms are perfect for anyone who wants to free up desk space. They come with the c-clamp option or the grommet option for attaching to a desk. My corner desk had a little shelf in the back corner which worked out perfectly for me. I drilled a hole through the shelf and attached the base to that. This allowed me to push the monitor arms back into the corner further than I could if they were on their stands. The hydraulic tension screws allowed me to adjust for the weight of the monitors so they wouldn't rise or lower on their own. The only design flaw I have found is the cable covers. You feed the cables down the arms and cover them with a plastic cap. Even when giving the cable enough slack (for raising, lowering, or rotating) the plastic covers pop off. Being the monitors are in the very corner, you can't really see the cables anyway, but if you went with an open room desk layout, you'd easily see the cables. Not a deal-breaker in the end though as these monitors are sturdy, look great, and really change the feel of your desk.I have included photos so you can see how much arm room is needed behind the monitors. Sometimes I will put my standing desk on top of the tabletop for those long work sessions. The monitor (which is behind my standing desk) can then raise all the way up and even angle while working this way. I work IT for a school and have ordered many monitor arms in the past to install for admin work stations. These are by far the best ones I have worked with. They are sturdy, great value, and easy enough to work with.

I am using this to mount 2, 27'' monitors on my desk. First of all, the product comes in well packaged. Instructions are easy to follow. The manual refers to each part with a letter though the parts (other than the screws) are not labeled. It took me a few minutes to identify each part. Not a big deal but it would be easier if they could just stick a label with the corresponding letter to each part. The arms are heavy and well built. Installing was easy, and results were good. Some things to notice - it does need clearance on the back of the desk. You will be loosing a lot of range of motion if your desk is flush to the wall. Alternatively you can install it at the side, which for me was not ideal. I ended up separating my desk from the wall a few inches. - The arms are sturdy but also thick. Of course, you cannot have one without the other but it does limit the amount of things that you can place behind the monitors (still better than with just the bases) - cable management system looks nice on video, but this is actually the worse part. The plastic for cable management is flimsy and will snap off if you move your monitor(s) too much instead of forcing the cables to move inside. It is surprising how a so well built system ended up getting such lousy plastic covers for cable management.

This monitor arm is a great alternative to the higher priced dual mounts such as the amazon basics gas spring desk mount! I was looking for something at around $100 that could hold my 2 27” ASUS ROG monitors (model: PG27AQ & PG279Q). I was especially worried because of the weight of these monitors but I have them installed and they are able to hold my monitors beautifully so far. I will update if they start to drop over time. For these specific monitors it was a bit tricky to attach the mounting plate to the arms. Because the plates slide on the arms and that section is recessed on the monitors, I had to screw the plates on the monitors after I had already attached them to the arms. But I was able to make it work, it was just a little more difficult since I had to attach it to the desk after the arms were attached to the monitors. I was able to position them exactly where I wanted them by mounting the arms off to the side so I could have my main monitor centered. Overall surprisingly sturdy construction and quality materials used in the arms, I honestly didn’t think it would be this sturdy. I also was able to increase the height of my monitors measuring about 9.5in from bottom of the monitor to desktop Highly recommend for an 100$ option for 27” monitors that are heavier than average!!!

I have been using the EleTab Dual Monitor Mount for a few weeks now and it checks off every box you can want for using multiple monitors. The arms allow for a wide variety of setups, allowing your monitors to be oriented in any way. The arms are fully adjustable and the gas springs can be tightened or loosed to your desire. Another nice feature is the cable management system. The cord channels can be utilized to limit the visibility of the various cables to and from the monitors. Pros: - Well made and sturdy - Easily adjustable - clamp or direct mount to a desk - secure attachment to monitors for freedom of movement - all tools are included and easy to assemble Cons: - Currently none