Pdr Glue Sticks , Gliston Hot Glue Sticks Paintless Dent Repair Tool for Car Repair Dent Remover Tool Set - 5 Packs Black & 5 Pack Yellow

Black ones are stronger

These are too good ,they have strong hold

Great overall Value- I believe these assorted sticks were like 11.00 shipped.. First of all the BLACK GLUE works Great when the air temp was 65degrees or less and there was high ambient humidity the glue pulled decent, BUT as the midday sun warmed up the metal the BLACK "GOO" refused to fully cure.. even after 25- 35 full min they remained soft like BUBBLE GUM-- I repeated this 10- 20 times trying to get BlACK glue to cure, never really curing The YELLOW- CLEAR sticks performed MUCH BETTER on our warm summer day.. The metal temps were between 85-95 degrees and the dent pulls on this glue was much more agressive!! Perfect POPS were after 6- 9 minutes of letting the Yeller glue fully cure and the POPS were noticeably more agressive--- be patient its a LEARNIN CURVE --- PRO TIP-- use a COTTON BALL saturated w/ DENATURED ALCOHOL for dissolving the GLUE TABS--- dont waste your time on cheapo RUBBING ALCOHOL---

I tried the regular hot glue sticks I had to try pulling dents using the GLISTON Paintless Dent Puller – Golden Dent Puller Kit. Even after leaning thoroughly with alcohol the regular hot glue did not "stick" well enough to pull the dent out. Ordered these sticks and used the amber colored ones on a 60 watt glue gun. At 60 watts the glue gun made this amber glue bubble and smoke a little. However, the glue proved to be superior in "stickiness" to the regular hot glue from the big box stores. The pull buttons would not pop off when pulled by the tool. After pulling the dent I had to manually pry the button and hot glue off using a small plastic spatula (included with the kit) and regular 90% rubbing alcohol from the drug store as a release agent. This glue works great for what it's designed for - pulling dents.

These glue sticks are large. They are not made for a common glue stick gun. I don't remember if it said the size?. So I went and bought a commercial gun. Don't make the mistake it fits a common gun. THESE ARE NOT PDR GLUE. DO NOT BUY FOR AUTO.

The yellow glue sticks are very strong and adheres extremely well to metal. The melted glue must dry completely for 5-10 minutes before trying to pop out a dent in auto metal...but it works great. If the glue sticks to the metal...application of some heat by a hair dryer will make it flexible and easily removed. Alcohol will rub out any left over smudges. This is a really good product...but must be used carefully. The black glue sticks are not as strong in sticking to a metal surface...but works well with crafts, etc. I used two yellow sticks to pop out a large dent in the hatch of my SUV. The effort took over 8 different attempts, and about 2 hours, but almost 100% of the dent came out and has returned to the original shape. You have to be patient and work with the dent to get it all out.

Just ok