Dorman 926-188 Engine Oil Pressure Sensor Compatible with Select Models

It fixed my engine light coming on issue. Was relatively easy to remove the old one, but very challenging to install. Such a small area to get hand into and get sensor in position.

Producto a buen precio

Perfect for 2013 Chrysler Grand Caravan. The Dorman part installed easily, with zero leakage and accuracy for both DTC and replacement part functionality in shutting off the check engine light upon the first start. The part is a durable replacement, beefier and better sealed than the original issue. Installation tip: A standard 27mm deep well socket fits the sensor. However, the clamp on the antifreeze hose (on the oil cooler unit, next to this sensor) is most likely installed with the tab blocking a socket from encompassing the sensor nut, even a thin-walled socket. I always pull the intake anyway to do gaskets and plugs while I'm in there, so I used a 1 1/16" box-end wrench. I'm glad I did because I found another leak. Note: It is not necessary to drain the radiator to do this job under normal circumstances. But stop what you're doing mid-job and drain the radiator if the coolant line beside the sensor is leaking, either from the connection/dry rot or even if you accidentally pierce it while replacing the sensor. If you don't, coolant and oil will shoot everywhere! The fastest way to drain it is to pull the overflow bottle straight up and move it out of the way. You can then reach down and unscrew the red drain plug either by pliers on the sides or a slotted screwdriver on the face.

GOOD

Great part, fit well. Install was an absolute pain, but not the suppliers fault. Very happy that my check engine light is off.