Scotch-Weld Acrylic Adhesive DP8410NS, Green, 45 mL Duo-Pak, 1.52 fl. Oz., Non-Sag, Tough, Two-Part Acrylic Adhesive, 1 Each

This is a good, cost effective adhesive for high shear strength applications, such as building golf clubs. DP8410 has significantly higher heat resistance than DP810, which is a standard in the gold industry. It is also considerably less expensive. The fly in the ointment? DP 8410 mixes at 10:1 and is packaged in a 45 Ml cartridge. Most epoxy applicators — especially the cheaper Chinese ones — are set up for 1:1 or 2:1, and the larger 50 Ml cartridges. To use this stuff you need to find an applicator that is set up for 10:1 and the smaller 45 Ml cartridges. They exist but are not easy to find … you need to search for “45 ml 10:1 epoxy applicators,” or something similar.

Don’t waste your money It doesn’t work! I used it to see all the exterior of a plastic tank. I even prepped the tank even though they said no preparation is necessary. I’d likely sanded the area cleaned it all with alcohol. Let it dry for a couple days wiped it down once again I bought the gun to mix with the nozzle thing to mix it. Absolutely horrible does not work the stuff peeled right off.

I switched from other 3M epoxies and haven’t looked back. Great product at great price. Thanks 3M!

I am a frequent builder and rebuilder of golf clubs. This has become my go-to epoxy for building clubs. It's great!

This stuff is one of the best adhesives going for when you need high strength and fast cure. It stick to metal surfaces better than anything else I've ever used, even oily surfaces. I use it to build golf clubs, and there is no better material available, that I know of.

It should state somewhere in the description that NO mixing/application nozzles are supplied. I should not need to purchase 25 nozzles for a product I will use once and discard. I saw other similar items and they all showed nozzles.

This epoxy has great reviews but I can't find a single applicator that fits this cartridge. I've purchased about a dozen different ones, including 3M's own product, and NOTHING will fit. I have no idea why they would make it so heinous to use this crap.

Used to adhere a carbon fiber handle into a stainless steel tube. Follow directions with cleaning or any adhesive will fail. In my case I used acetone on stainless and alcohol on carbon fiber. The two pieces were a close tolerance that used fiberglass mesh as a spacer and mated positively bullet proof.

Great adhesive for golf clubs. 1 hr in a sandwich makes at 100°f and the aversive is fully cured. Expensive but worth it and will buy again along with the 3M DP-420

Works awesome, just make sure you have your 10:1 plunger. Work great when you have 24hrs to let it cure fully.