Motor Trend Seat Covers for Cars Trucks SUV, Faux Leather Full Set Beige Padded Car Seat Covers with Storage Pockets, Premium Interior Car Seat Cover

They were a bit tight to get on but seem to have stretched a bit. The fit is good, covers the edge seams which is what I wanted. Other covers didn't camouflage the edges.The elastic on one side of the bench cover came off when I pulled it down but stays on well despite, maybe be careful how hard you pull on the elastic tethers.** 1 year- fine for about 8 mo but now they slide, fold, the elastic straps have stretched or torn, the anchors dont stay put and overall are a pain. Looking for new ones. They still look good as far as appearance but do not stay in place at all.

I am driving a 2019 Subaru Ascent.As the other reviews have said, the single seat covers are so easy to install and fit well. The bench seat, however, can be a problem.The straps that go underneath from front to back and clip do not have an adjustment. They are elastic and they seem to work well for my needs.The elastic straps that go side to side have the hooks to attach underneath, and they do not have adjustments, either. Which, again, seems to work fine for my car.The length of the cover is way too long for my vehicle, so I had to tuck the sides down after centering the correct way.The buckles do not have anywhere to pop through, so I may have to cut and reinforce holes in it to accommodate. Which is the frustrating part because, truthfully, I don't want to have to alter a product that should work.Otherwise, I am so happy with this purchase and can update in coming months with how well they hold up with 3 kids.

I bought these for my car which I mostly drive with my dogs in tow. I have an Acura TSX wagon and they have perforated leather that became victim to my dog clinging on when he saw me pull into the vet parking lot. The front seat covers fit well but the rear cover is a tad too long but negligible since I can detach the bench and tuck it under. They look well made and I’m satisfied with my purchase. Only drawback is I wish they made a greige tone to fit my interior better.

I have found that these do not fit a 2021 Subaru Crosstrek as I was informed by Amazon when searching for these. They are too small as in too short to fit the front bucket seats. I constantly have to pull them back toward the back of the seat as the attached line with a disk on it to secure in the crevasse of the seat does not keep them settled tightly against the back and the front attachment to hold in place to the front of the seat doesn’t attach to anything I can find to keep the seat covers from sliding and moving. So I am constantly adjusting the darn things.The bench seat cover is way too large for the Subaru Crosstrek with the back seats down or up. Either way, there’s nothing to attach the bench seat securely to back there either that I can find that works.I liked the color of these covers and tried to make these work as best as I could with the attachments provided, but found it just isn’t doable. I was passed my return window.I’ve had these since June 2022, and have found that they are already showing wear cracking where I sit and I am an average weight person for my age and height and I feel they should not already be cracking based on that and the fact that I do not drive my car mileage or daily wise, like an average person would. I drive it much less.There is already puncture holes as well. I do not have a passenger but maybe one percent of the time I drive my car. I do have a dog, but they stay in the back. The puncture hole is on the passenger cover. I have no idea how it got there due to this. However, if it was my dog’s nail, thank goodness, the cover did do its job or whatever it was that caused it. Therefore, I am giving it three stars, also because it has stopped liquids that were dripped out of a cup a couple of times from getting to my seat. For the most part.However, because the back of the bucket seat is not covered fully by the cover it is always dirty back there as well as some of the liquid did leak but I caught it in time to wipe it up. Either way, I don’t think that these are very durable and they just don’t fit, so I don’t believe they’re worth it.They really don’t add much extra padding IMO either.Hopefully someone else gets help in determining if these are right for your car and use out of this review.

The quality is good but it’s super difficult to use for grand highlander’s bench seat.Not much help for seller and they recommended me to return the product.

2004 Jeep Liberty. I've had these for about two years. They are starting to show some wear, but they still look good. The front seats were easy to install, they look good and they just look like they belong there. The back seat cover is all one piece, but the back seat in my Jeep Liberty is split, so the cover fits about as well as a blanket would, and I had to improvise a bit when installing it. It doesn't look nearly as good as the front seat covers but I guess it does the job. Overall, it is a decent set, I just wish the product description was better so I could have avoided buying the back seat cover. I definitely recommend the front seat covers.

I only purchased the seat bottoms, installed easily and no slip as of yet, for 6 weeks. Only concern is rear bench seat doesn't fit like a glove, so to speak. Still happy. Installed on 2009 Jeep Wrangler

The quality of these seat covers was good, however the back covers was way too big. I put my SUV information in the Amazon app and they were supposed to be compatible. The day it was delivered the box was left in the pouring down rain and basically fell apart when I brought it in the house.I returned at a UPS drop off and ended up paying $13 dollars for a box. I never had to worry about the box with returns. Won’t use UPS again. So because I was given incorrect information about the fit I ended up loosing money on this purchase. Lesson learned.

Color similar al descrito, acolchonado, en mi Mazda X 30 cupo en forma apropiada y facil de instalar

I'm satisfied with my purchase, quality is good, however installation was a little tricky: for the front seats I had problems with finding a secure place to hook up the under seat hooks, but it could be related to my car seats' design (Volvo XC60), same for the size and fit. As for the back seat cover, the shoulders are were too wide and required to be folded and stitched to stay fit. The other problem was back seat seatbelts insertions that there were no openings for them. I had to cut openings and reenforce their back with duck tape to prevent reaping. It's overall a good set if you put some time on it and know what you are doing.

Si le quedaron muy bien a mi carro, tarde un poco en colocarlas, pero todo bien.

Material resistente y buenas Construccion

Thought the back seat cover would work, however, it would only work on a single bench seat and doesn’t accommodate the seat belts on tge 2/3-1/3 split seats. Could only use the drivers seat one as the front seat is also 2/3-1/3 split. So guess I have a very expensive drivers seat cover lol. My bad, I should have researched a bit better. The one I am using is GREAT and will stop the wear on the seat I use most so I am happy with the quality