Niviy Window Privacy Film Decorative Static Cling Non-Adhesive, 23.6"x118"

Exactly what I’ve been searching for! With other films, you can still kind of see through them. I couldn’t have that for my massage business so I was thrilled when I found this one. You can’t see anything through it regardless of what angle you stand at. Blocks out all light. It was easy to put up by myself. Just make sure you get the window VERY wet to reduce air bubbles and to make it easier to remove any that do come up. It’s easy to remove and reposition if needed. The color and design is gorgeous. If you follow the instructions, the edges will lay flat and look very smooth. Great value!

This product is well worth your money. I have the privacy that I was looking for.

This privacy film is easy to put on the windows and has stayed up perfectly for a long time. It looks great. It lets the light into the room but still provides privacy. Much better look than curtains.

We needed to lessen the sun glare at our tiny farm retreat that we are completing. All the front windows receive sun majority of day. We want to bring as much of nature inside, so needed something that allowed the scenery. I ordered three Black/Silver rolls in 23"X78" for French doors and two small side windows,based primarily on reviews. Maybe because the door windows are long, felt it necessary to have help. Be aware the red arrows are to be placed on both sides at top, to remove the protective film. I did not get "that" at first with the installation pic. We used a little dish soap in a spray bottle of water, and followed instructions. One of us peeled the film, and the other sprayed the window very liberally, and the film. We placed the two raw edges along the door edge, so we only had two cuts, but it was difficult to keep the film close to the edge all the way down. The next door we allowed some to overlap, squeegeed as close to side and corners, then used enclosed blade to cut the film. I personally felt the hardest part was removing all the bubbles. It took lots of tenacity to removed 99% of the bubbles. The doors seemed easier than the windows. My husband is ecstatic with the result, since it completely met our objective. We can see the beautiful rolling hills and pond without the glare and increased heat,so even our PTAC unit does not need to work as hard. Now I just hope it has nice longevity. Just make sure someone helps, and be sure to start immediately working out the bubbles. Think you will be pleased. Nice added privacy too, since the outside has a mirror effect. The inside view shows left side without and right side with film, and outside shows view looking inside...nothing. Not sure yet at night, but hope it is the same.

Ok, this is an honest review based on hours of research in choosing the right film to give privacy in our bathroom without blocking too much light. The ones that look like stained glass are very pretty if that's the look you want? However they are not actually colored it's a prismatic effect from the sunlight shining on it. I'm not looking for that I want privacy not glistening rainbows. Then there's the pattern ones with birds and the like. Some of these offer privacy and some don't, choose carefully. As this is my bathroom/guest also, I'm not looking to make the window a focal point of design. So I ordered privacy film with a slight floral pattern (trying to please wife also). That being said my careful research paid off. It met my expectations. Now for the second part of my review the installation. Lots of things to address here. First I will address the naysayers who's film didn't stick. Your wrong you installed it incorrectly. How do I know, well I'm a semi retired professional wallcovering installer and own my own wallpaper installation company. I'm a licensed contractor with over 40 years experience of hanging wallpaper every day and trust me when I say the process is similar. First of all examine your product keep it in a warm room for at least a day not your unheated garage in winter. Examine the product and determine which direction you wish to install, vertical (easier) or horizontally. Cut the film about half to 1 inch bigger on all sides. Don't cut to fit beforehand. The product has a film on the back that MUST BE REMOVED or it will fall off and you will be using scotch tape and complaining here. The smooth side not the textured side is the side that will stick to your glass which will be on the inside of your home, not to be installed on the exterior side of glass. So now you have your pieces cut correctly and are ready. But first you must thoroughly clean your glass and remove all contaminants especially flecks of paint, dust, dirt etc even invisible microscopic grain of dust will cause bubbles, similar to that protective film you badly applied to your phone so paid the guy at the mall $20 to do correctly. I recommend using isopropyl alcohol or other cleaners such as paint thinner or even acetone (nail polish). After that use vinegar and water or at least Windex. Get a nice pump fine mist spray bottle add water and a drop of detergent shake and spray the glass thoroughly and evenly. Keep a towel handy to wipe up drips and all the goo from the window sills you never clean. Apply film and slide into position butting one long side to the edge of glass or trim.gently use a squeegee preferably one with a no scratch felt side to push bubbles to edge and out. You can buy these on Amazon or big box stores or use a flexible wallpaper plastic or heck even a credit card will work. Once you've got 90% of the bubbles out except at edges use your plastic FIRMLY TO crease the edges. Take your snap of blade knife and run the knife and plastic along the edge, lift up the corner you can't cut and cut with the knife or scissors (better) that last 1 inch. Rinse and repeat. You will have a few small bubbles. Check your cuts where the bubbles are and it's probably trimmed too fat and putting pressure on the film which causes it to bubble, re-trim using the knife on the inside of the plastic this time. You may get 1 or 2 small bubbles. Don't worry wait a couple of days and it will shrink and suck in to the glass adhering tightly. You can also make a tiny, tiny cut into a bubble with your blade and smooth down if you like, but please don't poke with a pin or you will have a permanent visible hole. After several days you will think that a professional like myself installed it for you and you can pat yourself on the back as you have saved yourself hundreds of dollars on installation and can volunteer to do all your friends and neighbours windows. Your welcome, good luck !!! I'm Gary and I install "Ultimate Wallcovering" in Southern California, and I approve of and recommend this product. Remember....measure 3 times cut once !!!

I love this privacy film. So easy to install, and I love that it still lets in some light. I put this on the transom above our deck door to stop the bluebirds from pecking at our window. They would see their reflection and think they had to protect their territory. From day one of putting this up, no more pecking or bird poop on the sill.

Excellent product good quality and easy to apply. LOVE IT! Didn't need alot of water. Love the texture let's in the light and is not see trough.

This isn’t a terrible window film. Looks cute. However, it’s not completely blackout. It’s also a little more difficult to work with than other window films I’ve been using. It’s a bit flimsy and thin. It also cut a little weird. It kept cutting jagged with a brand new blade. It is not scratch resistant.

Buen producto

I recently purchased this Window Privacy Film and I must say, I'm thoroughly impressed! The installation was a breeze, thanks to the user-friendly peel-and-stick application. I was pleasantly surprised by how effectively it obscures the view from outside, providing the privacy we needed in our home. What I love the most is that while it ensures privacy, it doesn't compromise on the natural light. Our rooms are as bright and sunny as they were before, which is a huge plus. The film is also quite durable and has held up well so far, showing no signs of peeling or fading. In terms of aesthetics, it has added a nice touch to our windows, making them look more stylish and modern. I highly recommend the Window Privacy Film to anyone looking for an easy, affordable, and effective way to enhance privacy in their home or office. A great product indeed!

I love this!! I bought it to cover my brand new stainless steel refrigerator and it looks beautiful. I never have to worry about fingerprints again, and it’s so easy to wipe it down. It was a perfect fit for my 33” wide fridge, and only had to be cut to length. Fairly easy to install, after removing fridge handles. About 1/2 hour to put on, including carefully removing bubbles. I couldn’t be happier!!

Provided the privacy we were looking for. Easy to install and cute to look at.

Beautiful, love it