HUANUO Universal VESA Mount Adapter Kit, Non-VESA Adapter for 17 to 27 Inch Monitor Screens to 75x75 VESA Mount

Perfect mount for my Dell Inspiron 5490 AIO (all in one) desktop pc with a built in soundbar that has the power button on the bottom. This AIO has a curved back, the exhaust vent at the top, and a built in recessed popup camera. Tough to find a mount that will hold this pc securely with minimal impact of those things AND the ports along the bottom of the back. The mount allows good access to all my needed ports. The "grips" are also low profile so my pc doesn't look like it's grown stubby ears & feet! Had to adjust it a bit to the left of that power button on the bottom though but not a deal breaker. Well made, affordable and easy to "construct" with the tool included. Thanks!

If you can't tie your own shoe laces... don't buy this, it will be too complicated for you to put together. Ok jokes aside. If you are reading this, most likely you are like me and read through a ton of comments before deciding to buy this thing. I was a little apprehensive about purchasing this because of some of the other reviews. I have three 32 inch Samsung curved monitors (LC32F397FWNXZA). They do not have VESA mounting holes in the back so I had to find an alternative. Even though I had all that apprehension because of the reviews I decided to buy it... I didn't really have many options. The outcome of the install was so hilarious to me I had to come and write a review. There are a few 'issues' listed in other reviews I want to address. 1) The people complaining about the number of pieces this adapter comes in: Yes, this thing comes in several pieces.. about 40 pieces + some foam adhesive strips. YES you need to assemble this thing. NO this isn't 'excessive' or done on purpose to save shipping costs. This mount is meant to fit a pretty big range of monitors both length wise and thickness. If you have a smaller monitor that is pretty thin, you aren't going to use as many pieces. If you have a curved or thick boy, you are probably going to use almost all of the pieces. There are even two sets of (4) screws to use depending on the thickness of your monitor. (I used all the pieces except for the extra set of screws). 2) To the people complaining about how difficult this is to assemble: what????? It takes 5-10 minutes max. If you are having issues assembling this, did you even bother to read the instructions? Even without instructions, this thing is pretty easy to figure out. 3) To the people complaining about how sturdy it is: did you assembly it correctly? Did you tighten the screws sufficiently? This thing is pretty sturdy on my monitor and its a curved monitor.. I didn't tighten it all the way. Because of this I have some minor slippage of the arms when I move it around a lot but its not bad. I would not turn the monitor horizontal, this adapter isn't designed with that in mind. 4) To the people complaining that the tools are garbage: yeah, they are pretty crap BUT you can fully assemble this with the tools provided, its just way easier if you go get a set of real tools. You basically get a child's play wrench in the box. 5) To the people saying the bolts on this adapter do not fit any VESA plates: I'm not sure if the manufacturer changed this, maybe it was a bad batch or if I just got lucky but I had 0 issues using it on this mount: https://www.amazon.com/gp/product/B00MIBN16O/ Don't buy this if: -You have difficulty looking at assembly drawings/reading instructions. -Have trouble with small parts. -Do not want to have to use a wrench/screwdriver. -Have a MONITOR outside of the size range. Yes, some people have had success with ultrawide monitors, it depends on the aspect ratio as to whether or not this will work for you. Do NOT buy this thinking it will mount your tablet or tablet-like screen. This is not meant for super slim portable screens like in that one guy's review. -Have a curved monitor that doesn't really have a 'flat' part on the back. -Have a monitor with a super-thin or nonexistent bezel. The clips are meant to rest against the bezel, if its too thin it's going to interfere with the screen. -You haven't looked at/identified where your monitor's access ports/buttons are. My monitor's ports were in a recessed area in the middle/bottom of the monitor, this fit perfectly between the mount arms. My power button is to the far right side of my monitor. If your monitor's ports are off-center or if you are trying to mount a very small monitor this might cause you issues.

This item is very durable for the price and does what it’s made for perfectly. Lots of adjustability for different kinds of monitors. I have curved monitors that are extremely thin on the top and thick at the base and the adjustments to accommodate for them were vouch easier than I expected. It probably took 30-45 minutes to set up with the tools included. The only thing to be wary of is if you try to adjust the angle of your computer you need to hold it by the area it connects to the vesa mount. If you try to turn it with the adapter arms it puts too much pressure on the screen and could cause damage. Overall a good product and I am happy with my purchase.

Works perfect for my three monitor setup. Highly adjustable, it to easliy holds my HP 32 inch monitor perfectly and looks good while doing it. Made from steel with solid hardware. Easynto setup, from opening my box to having it on my monitor itnonly took me about 10 minutes. Good value if you need to setup multiple monitors.

Pros: - Great mount that holds the monitor very well as i have a 27'' monitor - Looks very pleasing as the holders itself are small from the front view so you can't really see much of it compared to the other mount holders which is very nice considering its a non-VESA mount holder Cons: - Slightly difficult to get spacers lined up for a more pleasing look but nothing really major - Pre-cut pads on the monitor holder so it doesn't damage the top and bottom side of your monitor is slightly thin and slightly smaller compared to the part on the holder (really just nitpicking at this point, again, nothing major, just wanted to point it out but it still does its job really well) - Instructions can be slightly confusing but its not really that hard to figure out even though its my first time assembling this

Item does what it needs to do. However, as for assembly, the included tools will do what it was meant to do, but it would take a bit of time as you would need to crank out each and every one of the bolts. Even after the monitor has been fitted onto the monitor mounts, it still needs some adjustment and tightening. As for the VESA compatibility, it is indeed compatible, although, the nuts included in this set may be a little too big to fit onto the back plate of VESA mounts. You may need to use a drill and drill a larger whole onto the back plate to fit the screws in. It might be different for you, but for me, I had to manually drill larger holes myself.

They didn’t work and were so difficult to put on!!! Sent it back upset!

I have unique curved monitors and these arms really helped my set up so much. I do get a little nervous it’s not super secure holding the monitors but it’s been doing the job and had been working for about 2-3 years now

It’s a good VESA adaptor for monitors that don’t have the VESA mount by default. The spacers they use between the mount and the clip is a little odd but works in filling the space between back bracket and the hook that goes around the monitor. Overall, it is very sturdy and functional. One thing to note is that the hook that goes around the monitor to hold the monitor will overlap the front of you monitor by about 2-3 mm… if your monitor is bezel-less or has SUPER thin bezel, it might cover a few pixel (picture attached). But otherwise, for most monitors, this should be functional without a hickup.

The securing tabs snap when you tighten the bolts

Cumple la necesidad a la perfección, lo único un poco complicado es ajustarlo en el monitor pero una vez que lo armas y adaptas queda muy bien, en mi caso tengo un monitor QIAN 23 pulgadas , llevo 15 días y sin ningun inconveniente.

Samsung frame TV'S are different from any other TV. We had to work out what sort of mont we could use, and this was the answer

Terrible design but it works. The rubber mounts are just foam stickers. Guess they'll do - no scratches on the monitor and the monitors are pretty static unless I stand up and work.If you dont have a VESA monitor - get one. I have a non-VESA and a VESA and no matter what mounting you use - the feel is not the same. But if you are stuck with a non-VESA monitor and have no option but to use this converter - its durable, feels smooth and nice to touch, holds the monitor quite decently and is easy to mount a monitor into. Engineering could be better I guess but its value for the money you pay for it. I would buy it again, if I ended up with another non-VESA monitor.