KES Sink Drain Without Overflow Bathroom Pop Up Drain Assembly Stopper Vessel Sink Brushed Gold for 1.6"-1.9" Sink Hole, All Metal Rustproof Brass and 304 Stainless Steel, S2008D-BZ

This is a a very good product. I bought a matte black Kohler faucet and drain set. I decided to keep the faucet, because worked great and fit in with my bathroom, but the drain assembly was problematic. The Kohler drain assembly had more plastic parts and leaked slightly no matter how tight I put it on. I'm not sure why the Kohler leaked, but my best guess was poor design and manufacturing of the drain (top diameter was warped and did not sit flush in the sink) and the foam gasket didn't seem to do the job. I was frustrated and didn't want to return the entire set, so I did my research and this product showed up. This product was comprised of more metallic parts and seemed sturdier than any drain I ever installed. The best of part is that I didn't used any tools to install it. The gaskets were all rubber or TPU. The pipe and drain valve are metal. Installation tips: Do a dry install and see where the washer lines up and teflon tape a few thread above and below. Then do the full install and hand tighten. Because of the teflon it will be water tight and no need to over tighten with tools. No leaks at all and works very well! Took about 10 minutes to install. FYI in comes with a foam white gasket as the top-most gasket and I didn't need it, so if taking it out is aesthetically pleasing, you can do it without the risk of leaking. No more leaks, better looking, and built better than a "premium" part.

Highly recommend this sink drain. We bought a Delta faucet with an all plastic pop up drain stopper which did not fit our existing plumbing. This is KES is all brass and stainless and comes in a various finishes and fit perfectly. Great quality.

This is an excellent , sturdy product that is incredibly easy to install , it is metal with silicon gaskets and can be installed with bare hands, no tools required, no plumbers putty required, and in minutes it is in and working. I've had one in for over a week and there has never been a drop of water or any issue with it. I bought a second one.

What a great invention. Easy to install. Took me about 20 minutes or less... Great price and works very well... I won't go back to the older drain plugs... 😁

I love this popup drain stopper. It's for a vessel sink with no overflow. I hate those conventional type of drain stoppers with the little rod that comes out of the side. This one opens and closes with a light push on the oil-rubbed brass top. I almost subtracted a star though because it comes with no installation instructions and wasn't as straightforward as one of the other reviews says. I had to watch six different youtube videos of similar installations before I got it right. Here's a hint that most don''t give. You should put either plumber's putty or silicone caulk around the sink hole first and them press the stopper down into the goop, making a watertight seal, or you will get a leak. Only one youtube video showed that. I'm still giving this product five stars though because I'm so pleased with the final results. I reviewed the sink, faucet, and mirror shown in the picture elsewhere also, on their own pages, giving them all five stars. I'm extremely pleased with all these fine Amazon purchases, giving me a fantastic renovated bathroom for just slightly more than $150. What a great price for such a lovely bathroom! We have a tiny house (400 square feet) and had it customized by the maker, turning a pantry into a very tiny half bathroom. They put in a sink that was too large. When I sat on the toilet my breasts were squeezed against this huge sink that hung 16" out from the wall. That was my motivation for this renovation. I removed the sink from the 12" vanity it was sitting on and replaced it with two fine top quality pine boards, which I finished with polyurethane. You can see them under the vessel sink in the picture. I marked the drain hole in the boards with a pencil, dragging it around the sink drain hole. I attached the sink with this oil-rubbed bronze popup stopper without overflow and silicone caulk on the bottom of the sink. The sink only overhangs the vanity top by an inch, making the tiny bathroom lots more comfy for me. The faucet is an oil-rubbed bronze and looks just like a miniature antique hand pump. Thank you Amazon.

Great product! Solid build, easy install, no leaks. YES. The ones that come with faucets are horrible, plastic, and always leak. I knew this and purchased my drain separately. This is for a vessel sink, and I am very happy with it.

Attractive and well made pop-up drain. Solved my leak issue as I was originally trying to use a drain that was designed for a sink with an overflow hole. If you are trying to install a drain in a Glacier Bay one-piece vanity top and sink, this is the drain you want.

Works great and it matched the oil rubbed bronze of the faucet quite well. Only caveat is I'd suggest using a thin layer of clear waterproof silicone on the top and underside of the drain gasket instead of plumbers putty. Let it sit for an hour before using. Sealed perfectly!

tout ok et en plus la tube en dessous la longuer n'est pas assez pour une vasque et un planck épais

Sieht Edel aus und kein 0/8/15 Daumen hoch...alles passgenau so wie ich es wollte...Qualität 1a kann man nur empfehlen

Bought a cheap "small round corner glass sink" off eBay a few years ago. The outflow was a cheap affair but worked fine until it totally disintegrated a while ago. This is an exact replacement but better quality. It took around 2 minutes to replace and we are back in business. Saved a fortune.So if you have one of those 310mm round sinks similar to this: Cloakroom Sink Glass Wash Basin Small Compact Frosted Round 310 Corner Inc Bottle Trap, Click Clack Waste, Tap Then this is the outflow you need to get as a replacement.

tutto ok

alta calidad