Single Monitor Arm Desk Mount for 13 to 32 inch Screens, Tool Free Height Adjustable Monitor Stand with Tilt Swivel Rotate, 75 & 100mm VESA Mount, Load 9kg, C-clamp & Grommet Options

Are you tired of your monitor hogging all your desk space like a greedy cat? Meet the HUANUO Single Monitor Arm Desk Mount, the superhero your workspace deserves! 🦸‍♂️ Dynamic Design: This monitor arm is like the Swiss Army knife of desk mounts. It fits screens from 13 to 32 inches and can handle up to 19.8 lbs – that’s like lifting a small dog! 🐶 With its tool-free height adjustment, you can easily tilt, swivel, and rotate your monitor to find that perfect angle, whether you’re working, gaming, or binge-watching your favorite shows. Ergonomic Excellence: Say goodbye to neck and shoulder pain! This monitor arm promotes healthy habits by allowing you to adjust your screen to eye level. It’s like having a personal chiropractor for your desk. 💆‍♂️ Space Saver: The HUANUO arm frees up more than 80% of your desk space. Now you can finally find a spot for that oversized coffee mug collection or your pet rock garden. 🌿☕ Easy Installation: If assembling furniture makes you break out in a cold sweat, fear not! This monitor arm comes with detailed instructions and can be set up in just 5 minutes. It’s so easy, even your cat could do it (if they had opposable thumbs). 🐱👍 Sturdy and Secure: Made from aircraft-grade aluminum alloy, this monitor arm is tougher than your morning coffee. It won’t sag or wobble, no matter how intense your workday gets. Plus, it’s compatible with both 75x75 and 100x100 mm VESA mounts, so it’s ready for action.

The monitor arm is well built, easy to install, and holds the monitor securely without any wobble. The adjustments are smooth, making it easy to position the screen exactly where I want it. It has helped free up desk space and feels very solid. I'm very happy with the purchase and would recommend it.

I had two monitors and a laptop on my work desk at home, all three at different levels, one of the monitors perched on a block of foam insulation to try to get it to the correct height. It didn't look great, and the bases of the monitors were eating up huge amounts of space on my tiny desk. I was on the lookout for some monitor arms, and these looked good. The arms require a little assembly, and all the tools and screws you need are in the boxes. Assembly of the base and clamp took a few minutes and the hardest thing was getting them onto my desk (you can also mount the arms through a hole in the desk if you can't or don't want to clamp them to the edge), then the lower part of the arm slots onto this, and the upper part onto the lower. The arms have a square vesa mount which you screw onto the back of your monitor - attach the monitor when the arm is fastened to the desk as it is easier - and that's pretty much it. A screw on the elbow of the arm allows you to tighten or loosen the gas spring inside as by default the arms will be at their maximum height extension, and you can tilt the montor if you wish. Once adjusted, you can rotate the arms, adjust their height, and you can even turn your monitor onto its side if you wish. They're very stable and so far I've not experienced any wobbling or sagging (for info the monitors I'm using are fairly old 20 and 22 inch monitors - nothing big or fancy here). The whole arm feels stury and weighty, so they seem secure. Cable management is a little fiddly. The lower part of the arm has a plastic channel on the back with a slot down the middle, and you can get two cables into this (HDMI or VGA, plus power for example), then at the elbow the cable emerges and you can fit it into a similar arrangement on the underside of the upper arm. This part is really fiddly as you have to unscrew and unclip the plastic cover here, but once in place it hides the cables pretty well. If I had to nitpick I'd say that the arms are quite chunky, so since attaching mine to the back of my desk (I bought two) I've had to move my desk a little bit further away from my wall as they were pressing against it, but it's fine. All in all I'm pretty pleased with them, and my desk seems roomier and looks better than it has for years, certainly without that lump of polystyrene as a monitor stand.

Excellent quality, good value, good range of movement, if you've only got a couple of cables then it's fine 3 or 4 though and things get a bit tight, easy enough to put together instructions are good. I'd get another if I needed one.

I was after a monitor arm so that I can use my PC and PS5 from my chair as I am disabled. There are lots to choose from and I settled on the HUANUO product. A good quality monitor arm. Made of metal painted black, with good quality black plastic cable management. It fits easily with the clamp to my side table. There are instructions for those tables with a lip, you will need a small wood block to fill the gap. It holds my 27" LG Gaming monitor well, and at an angle suitable for me. I can also fold back the monitor with ease when not in use. There are supplied Allen keys should you need to adjust the tension for heavier monitors. I have not yet needed to adjust any tension it works out of the box. Do not over tighten the screws when assembling the arm just enough to still turn the arm. Very pleased with my choice so far and for less than £40 quid well worth it.

Very sturdy arm construction, I have a 32inch monitor with a 100x100 vesa mount. It was very easy to set up: my desk had pre-drilled holes, but I believe it is also possible to use the clamp included. The cable management channels were also a nice touch. Overall I highly recommend this arm: especially at this price point.

Very impressed. Was for my wife's new office desk. Holds a 27" curved Samsung monitor nicely. Easy to manoeuvre, secure mount to the desk. Also comes with fittings so the mount can be bolted to the desk, rather than use the clamp. Comes with vesa mount screws for clamping the monitor to the bracket.

I bought this to free up space on my desk, and to give me a bit more flexibility with my monitor, which is a 32" and weighs around 6kg. So far, it has done the job admirably. It is very sturdy for the most part and feels well made and durable. The parts fit together very easily and set-up took very little time overall, as the individual pieces click together, with just a little allen key adjusting to tighten. The vesa mount is easy to attach as well, and my monitor (which has 100 by 100 set up) was able to easily slip onto the top screws, which held it in place while I screwed n and tightened the others. Adjusting the arm is very easy, and feels stable, I'm far from an expert but the gas mechanism seems to be doing the job. Its effortless to raise or lower, but then holds steady once you let go. A couple of quibbles I'd highlight. There is some very minor wobble when typing a lot, but its not hugely noticeable and I haven't found it bothering me. This may also be related to the fact that my desk is on a carpeted floor, which has a bit more give than hardwood. It's also less noticeable the less extended the arm is, so if you're planning to use at full extension that's worth considering. The other thing worth noting is that the clamp used to fix the base to your desk needs to have flat contact on both sides. This is important as a lot of desks have crossbars that connect the legs underneath. If you have this kind of desk, you'd need to use something to allow that flat contact, e.g. a block of wood the same width as the cross bar. I didn't find this issue hard to solve, and this might be a consistent issue across most monitor arms, but worth noting. Overall, this is a very good piece of kit. I'm sure there are better monitor arms out there, but for my use-case it does the job admirably. For the price, its an easy recommend.

Amazed by the flexibility of this thing. Really can turn at any weird angles which helps my work. I’m able to turn the monitor to face the visitors as well back to an angle where people standing could see. Love the hydraulic sound that comes with it that sounds like robocop. Only downside is I still haven’t figure out how to loosen the adapter holding the monitor. The instruction is to use the Allen key but it doesn’t fit. Need to check online on this

Awesome

As the title says, this was my first time mounting a monitor. Actually I have never mounted anything! I usually keep my monitors on their stand or TV's on a console. I recently purchased a Dell S2721D to use as a dual monitor and larger screen for my Steam Deck. Unfortunately the base of the monitor stand was HUGE! It also only allowed the screen to tilt up or down, I needed more. So a quick search on Amazon and I found this stand, what intrigued me was that it used gas for tension instead of coils. It also had a huge range of motion and tons of good reviews and was very affordable. Come day of delivery I unboxed it, read the instructions and went to work. First piece of paper included separately from the instruction manual was directions on what to do if your desk has a metal frame and then wood boards on top of the frame. This was my case, I needed to take an extra step to make sure the base of the mount was secure to my desktop. The instructions suggested using either a piece of wood to place under the desk next to the frame or a book, this way there is something there the same thickness of the wood + frame which would allow the gromet of the stand to catch onto something instead of just the lip of the metal frame. I went with a thick book and it secured perfectly! Next step was to remove the plastic frame from the lower arm and the upper arm so I could feed my wires through. This is where I hit a slight snag, the screw for the bottom arm was in an awkward area, the provided Allan key/Phillips head combo was too small to get a good fit into the screw head and only took a couple of twists to realize it could strip the screw head. Luckily I had a different screw driver and with a little effort I was able to get the screw out and the piece open. I placed my two HDMI wires and the power wire through the top cover first, made sure there was enough slack at the top and then screwed the plate back onto the top arm making sure it was not too tight. Then I pulled the cables down through the bottom plastic plate and screwed it back onto the bottom arm. Once I knew I had enough slack I tightened both covers. Next up was actually mounting the monitor. I removed the 4 screws that were already in the monitor and replaced them with the screws provided with the stand as they had larger heads. I screwed in the top two just enough to keep them secure and then hung the monitor onto the top of the plate which was secured to the arm, think hanging a picture frame. Now that the monitor was hanging on the plate, I slowly let go of the monitor as to avoid having the arm slam down or dropping the monitor which is a little less than 10 pounds. It hung with no issue, the arm didn't even go down in the slightest ( there's that gas power! ). I then secured the bottom two screws to the plate and tightened the top two screws, we were fully secured! I plugged in the power, the two HDMI cords and then rotated the screen 90 degrees to make it vertical and make sure I had enough slack for the monitor to rotate that far without causing pressure on the cords. Once that was done I pulled more of the cords down through the arms. Last step was to reduce the tension of the arm so that the arm could move up and down without too much force. I reduced it just enough to allow full movement yet keep the monitor in its place once released. Now I have full motion of the monitor, I can move it almost anywhere I need to to have the best view possible. This stand is solid, functional and the best bang for your buck!

Base attachment and gas spring are excellent. The cable management is poor - the top requires a screw to hold the plastic tray and the bottom only allows 2-3 cables from the monitor. Holds my 32inch Samsung monitor up ok.

Not sure why the other person says you cannot rotate, but you can. Set it up horizontal or Vertical. And can adjust the tension of the arm for heavy monitors. Great for the price.