Bathroom Concealed Wall Mounted Hot and Cold Bidet Spray Set Hand Held Sprayer Shattaf Toilet Attachment,Brushed Gold

Good quality. Still in use after 3 years - works as intended. The only thing I didn't like was faceplate. It's too thick. After tiles went on - I couldn't screw the pipe on as the face plate was in a way so made my own. But that just my problem

This is so good and durable

This product is complete unsuitable for use do not buy it, where to begin. Firstly and most importantly as other reviews have said (which I didn’t read) it is near impossible to get a seal on installing this mixer tap so it will constantly leak and ruin whatever you install it into. Secondly the unit as a very thin coat of black paint which wears off after the first couple of days of use which makes it look absolutely awful! Thirdly the mixer has absolutely zero insulation on the handle, it allows for hot and cold feed but be sure to gradually increase the temperature as you could end up with 3rd degree burns touching the metal conductive handle if the water temperature start off too hot. I would have sent it back for a refund had I known of all of these issues however due to not installing it for a while after receiving it I can no longer do this so I am furious that I have wasted so much money on such a rubbish product. Again DO NOT BUY THIS PIECE OF S*** it’s not the cheapest option on here price wise but quality of build is definitely the cheapest! Don’t waste your money like I have! You’ve been warned! UPDATE: Tap is now leaking from the handle, this product is not fit for purpose at all and I feel completely ripped off by this purchase!

Easy to install but the paint starts coming off easily from the handle.

It’s decent but one of the major disadvantage to this is that the handle gets too hot after you apply hot water. You are literally unable to hold it at that point. I did also get some minor leaks but the others I have bought are good.

Easy to install. Very attractive looking. Works very well.

Great value for money

I brought two of these, although the customer service team is great the douch cartridge and handle keeps leaking. Product is faulty/only to last a year.

Producto de muy buena categoría total como se describe

Missing two parts from the component, very disappointing 😞

Top Qualität

Parfait

Nice product for what it is. I like the finish. I only wish it was thermostatic; and I would have purchased it for a higher price just for that feature. Anyway, I've read a lot of reviews and most of the questions on Amazon before buying. First of all, this bidet can be installed both in a remodel/new construction and as retrofit. In my case it was a remodel but I opted to install it in a way that works for retrofitting so that way I can replace it if it fails (leaks for example) in the future. To install this bidet in a way that you can easily replace it if it fails you need to have a vanity near the toilet. Drill a couple of holes in the vanity, build a bracket to mount the bidet to it and install it on the inside of the vanity. Install your water supply lines by tapping into the sink water supply lines and you're done. You'll have hot/cold water bidet and without needing to mess with any walls or calling a plumber. Just make sure you do your measurements correctly. Once you drill holes in a vanity you won't be able to patch them if you make a mistake ;). For example, in your measurements account for how long your supply lines need to be to tap into the sink supply (the longest faucet supply line I've found at Home Depot online was 36"). Also keep in mind the bidet handle in your measurements, you don't want it to not have room to hang because you installed your bidet base too close to your vanity top. Make sure to use a thread sealant like RectorSeal and wrap teflon on it for your threaded connections (only on the inside of the vanity, not the nice matte black side where the hose connects to the base and handle) To install the cosmetic cover plate on the outside of your vanity use a double sided tape (like 3M or whatever) and add a bunch of it in strips building it to the proper thickness and just stick the plate to the vanity that way. In addition to buying this bidet I bought another bidet that has a traditional handle (squeeze not a button) that allows you to control the water pressure with your palm as you spray, unlike the one that came with this bidet; yes it is silly to have to buy a whole other bidet just to get the right handle but I couldn't live with the one that comes with this one because it leaves you with no water pressure control except at the base unit and that is just not practical at all. I can therefore confirm that you can install any handle you like on this bidet because it is a standard thread. Finally, as far as your supply lines, you can replace the valves for the sink with ones that have two outs, one goes up to the sink and one goes to the bidet. I'm attaching pictures so that it is clear what I have done to get this installed. The pictures show that the vanity top is off but that's because this is a remodel and the vanity is new, you don't need to remove the top to get this installed.