Neatfi LED Desk Lamp, 2200 Lumens, 50CM Wide Head, Dimmable & CCT (Black-2)

I paid £87.96 for this on 20/12/22 during a sale. It felt expensive even on discount, but when it arrived and I had set it up I felt a lot better about the price, because it's a really decent light.It feels very well made. The fitting used to attach it to a desk works great, and it fits easily onto the corner of my desk. The arm for moving the light around has the perfect balance of stiffness to keep it exactly where you move it, while also being easy to move it - you change the high and and position by dragging it around, and the angle of the light on the arm is changed by loosening/tightening an adjusting wheel.The light itself is very wide - I measured it to be about 50cm. The diffused light it emits makes it perfect for illuminating whatever is beneath it from all angles, so it's great for activities like painting models where shadows can be a pain. It's also super bright, so much so that I always put it on the lowest setting while using it (there are 4 brightness levels). I don't know this is definitely the case, but the tone of the light feels like sunlight - when I have it on during the night I feel like it keeps me awake/alert.Overall, I highly recommend it! I think it's a fantastic product, and would certainly buy it again.

This is a review for Neatfi XL 2,200 Lumens 24W Super Bright Desk Lamp LED Task Lamp WITH BASE, Black.The lamp has been well reviewed here as a task lamp with clamp, so I will restrict my review to it's uses as a tabletop lamp.The only choice with base when I purchased my lamp around 10 weeks ago was black (though it now appears to be available in white) but I don't regret that at all. I did wonder if it would be very utilitarian in appearance and not very elegant for a living room, but that was an unnecessary concern. It looks very modernist and quite elegant, and the wide, narrow profile of the light and it's shade looks entirely appropriate. All the light is cast downwards over a broad band, and illuminates the reading working area superbly without disturbing other people in the room.I have it on a low chairside table, at a level below the arm of the chair, and the long very manoeuvrable arm allows it to sit comfortably well above my head. It does not give off any heat at all. I invariably have it on the lowest of it's four levels for reading, though it might need to be up a little for embroidery or craftwork. The problems I had with eyestrain, reading or working in artificial light, have disappeared completely, possibly due to the white daylight effect.The base is very heavy (see the specs above) and there is no danger of it tipping over when the lampstand is slotted into place, though it does need a sturdy foursquare little table, not an unstable pedestal side table which might tip over. The base is cushioned with a thin layer of dense soft foam. It comes very well packed and is easily assembled.I had a few questions regarding the lead length and had a more or less instantaneous email interchange with a charming young man from the company. The lead is a bare 1.8 metres and I did need an extension so it would stretch easily behind my chair from the wall, so I went for a little black and yellow Parth Cube extension here on Amazon which is also of excellent quality and looks very stylish with the lamp.I can recommend this unreservedly as an excellent reading and work side table lamp, and though not cheap is comparatively priced with other quality reading lamps. Thank you to Neatfi.

Very high quality construction which I expected from a lamp of this price range. The arm is very heavy but the joints are good and hold the position you leave it in.I got the clamp version as space is limited on my desk. I must say I'm very impressed with this lamp, the light is bright and illuminates a large area making it very good for working on various sized projects. It has a built in defuser so the light isn't too harsh. I use it mainly for miniature painting and building.It only has a single button on the top of the light, allowing you to cycle through the different settings and turn it on and off with ease.There are cheaper options out there but none of them meet the same quality and light the area as well as this does.

Mine is CCT with clamp.DIMENSIONS and BUILDNo-one has mentioned size? Vertical height (length) of first arm is 50cm, second arm is equal length.My desk is 82 cm deep, so arms will easily span it from base at back corner to mid front for close work.Arms are 10mm tubular square steel (magnet test), joints are sturdy (but if need adjusting then you have to use an Allen Key, no thumbwheels. prossibly better that way.)Shade is hard plastic (ABS?), feels tough but not as reassuringly solid as the arms.It generally rotates to any usable positionCONTROLSOne switch does it all.Press once for on, then single presses for Warm, Daylight, Cold. Press and hold puts it into a cycle of dimming then brightening, just release at the right brightness. Two quick presses to switch off.GRIPESwitching on always sets it to daylight, mid brightness. It does not remember last setting. Not a showstopper, and at least it's a useable default, but still a tad annoying.POWERPower is from a 28 volt, 0.75A plug-in (not inline on the cable) "brick". Height and thickness are about twice that of normal 13A plug, cable exits at the bottom.Cable length ~1 metre. Perfect for fitting to desk if you have, say, a 4-way splitter attached to the desk. Problematic for a side table further away from a wall.Good news, power adapter terminates in a ~5mm connector which plugs into the lamp at the base. This makes it easy to plug the brick in, route the cable through small holes if needed then plug into lamp base.BRIGHTNESSOn cool setting, at 100%, it is bright but I wouldn't agree to "super bright". E.g. working on something with lamp 10 cm above the work, and face 7cm away from work, wearing a 3x eye loupe is just comfortable. IMHO, super-bright should be TOO bright at that range!But it helps my poor old eyes see miniature stuff!BASE CLAMPMade of some sort of steel alloy, magnet attaches but not as strong as usual, maybe a plastic casing? (Unlikely.) However the clamp is quite substantial, lamp is very stable.Max thickness clamp can span, ~65mmClamp "overhang" (how much of top of clamp sits on table) 50mmClamp "thickness" (how thick is clamp where it comes through, say, a hole) 30mmMy desk is 25mm thick and the cable entry hole is 45 mm, the clamp just hooks in comfortably (at an angle then straightened up.)WARRANTYApparently it has a 3 year warranty if you register. I'm not holding my breath that that counts for much!!VALUE FOR MONEYHmmm, £120 for an LED panel on an anglepoise with a clamp is quite pricey (you can get a microphone boom arm for £19?)£10 extra for Colour Control feels OK. But why is the version with a stand alone base so much more??In general, there aren't many alternatives and I feel this is a good lamp overall (as long as it holds up, my experience of LED panels in ceiling lights has been patchy) so it just feels high, but not a gouge.

Brilliant tool for my sewing hobby since my eyesight not as good as it used to be. It fits securely and easily adjustable to swing from sewing machine to cutting table. The choice of brightness helps with the close up work and is very sturdy when pushing and pulling the light into position. It was very easy to install following the instructions.

I bought this lamp in order to help me paint miniature figures for wargaming. I had read several reviews for several different lamps, but the reviews for this one were quite good, and it was not too pricey. Yes it is close to one hundred pounds, but if the lamp lasts as long as it should, it represents excellent value for money. I am slightly older now than when I last did painting, and I wanted to get into it to such an extent that I could start submitting projects for competitions. I have used it in the last fortnight and have not been disappointed. It gives excellent coverage of the model and there are several light settings, so if the light is a bit on the bright side, you can turn it down. Using the light I can pick out some fine detail without the need to resort to a magnifying glass. It is easy to set up and very stable. I do not have a dedicated room for my modelling, so I end up working on the dining room table a lot. Once clamped in place, it is very stable and easy to control in terms of how close you can put it to the model. You can also fully extend the top part of the arm without the lamp coming out of the clamp due to the altered weight distribution.The only thing that I would point out is that the lamp cannot rotate 360 degrees and it can be a little awkward to move it around until you are use to it. There is a pivot guard just above the light that can get in the way of it's movement sometimes. This is only a very minor issue and once you get used to dealing with that, it becomes easier. Because it is so minor, I have kept this to a 5 star review.If, like me, you are someone who is coming back to a hobby due to staying indoors and need some light to help you, then I recommend this light.

Updated1st PurchaseAs desk work light to go in wife's sewing room. Clamped to desk, positioned over sewing machine, the light is a good length at around 20" and giving a good white light that I'd guess isn't too far from daylight (5500K) which for this type of work or anything that involves colour is vital. Many similar lamps will give off a much 'warmer' colour light which means you wont see the true colour of the things you are working with. The human eye is designed to see 'true colour' in natural daylight which is around 5500K.The light output is excellent giving a bright defused light on the work area, the lamp is height adjustable over a good range so you wont be banging your head into this lamp. When we were ordering my wife was a bit "£95 for a desk lamp!!!" but now it's installed is very pleased. Classic example of getting what you pay for.Negative pointslamp offers a range of output levels by multiple presses of the on/off switch, can't see this being much use suspect for most it will either be on at max light output of off but a minor point.Would I buy this again? YES in fact I have my eye on an illuminated magnifying lens version of this lamp from the same company for my desk!2nd PurchaseFinally decided to go with the regular desk lamp rather then the unit with the magnifying lamp as I'd only use the magnifying lens occasionally but its got a slightly lower light output of 1600 lm against the regular desk lamps output of 2200lm.So having purchased two I'll leave you decide if that's a recommendation???

We bought two of these lamps, one for 28mm model painting and one for crafting. The are well made, simple to operate and give a bright natural light, very close to daylight. Considering the price of other similar lamps they represent good value for money and a small extra bonus is that they look smart too. Assembly is simple and takes just a couple of minutes to unbox the lamps secure the clamp, place the arm in the clamp and then place the lamp in the position you want it. The clamp is reasonably large so you do need a reasonable lip on your desk or table to secure it in place. The lamp head has a locking facility so it does not move around once in position. I would recommend this product.

Absolument merveilleuse!!Je travail dans un sous sol pas de fenêtre et cette lampe illumine comme la lumière vive du jour! 10/10 je recommande!!

La recomiendo super mil es bellísima la luz es muy brillante el color es divino llega super bien cuidada el paquete está súper protegido y llega antes de la fecha super rápido recomendadisima el materia de excelente calidad luce divina

Just bought this and already love it! I have a pretty big nail desk from IKEA, so I’ve always had to use one ring light on each side of my desk to get the perfect amount of light right at the center of my desk. A Other lamps never worked because they would never reach the center of my desk. This light not only reached the center of my desk, but it passes the center, almost reaching the other side of my desk. You can move it close and away from you, as well as up and down. Whatever works the best for you. It comes with 4 brightness settings and so far they are all super bright. I’m excited to start using it! I got the pink color and it’s kinda of like a hot pink / Barbie shade. Super cute.

Es un excelente producto me llego un dia antes, la calidas es muy buena vale mucho la pena

El artículo a primera vista se veía bien, checamos la funcionalidad del mismo, la intensidad de la luz y todo estuvo excelente, hasta el momento de revisarlo más a fondo que fue cuando encontramos la grieta en el soporte. No soy experto en estas situaciones, pero por el tipo de falla dudo que hubiera sido hecha en la transportación. Hay que revisar muy bien los artículos antes de instalarlos.