PRO BIKE TOOL Bike Pump with Gauge Fits Presta and Schrader - Accurate Inflation - Mini Bicycle Tire Pump for Road, Mountain and BMX Bikes, High Pressure 100 PSI, Includes Mount Kit BIK

Got this today. Tried it out to see how well it works. Works great! Looks great on my Diamondback!

I bought two other pumps and returned them both before getting this one. Much easier to use than the others. The gauge is a nice added bonus and the pump is very slim compared to others. I also like that you have to fasten the pump on the valve and that it has a flexible hose. Makes for a much more secure latch and easier to pump. Very high quality.

really glad i picked this up. its been a life saver. its nicely made, looks good, and does a great job!

I bought a Pro Bike Tool Bike Pump with gauge in 2015 and have been very pleased with it. Recently, the Schrader connection on the hose started showing signs of wear, probably because I’ve had so many flats. I filled out the warranty claim form and receive an immediate response. I was offered a replacement or a refund. Since I really like the pump, I elected to get a replacement. To my surprise, I received a CO2 inflator exactly like one I ordered about a year ago. We figured out that since my order was done so long ago, the replacement order on Amazon defaulted to my most recent Pro Bike order. No problem, keep the CO2 inflator, order a new pump and they refunded my purchase. Great Service, they absolutely live up to their guarantee and they make a great pump. The new pump has a cover over where the hose attaches when the hose is stowed. Good improvement but I never had a problem with the old one. I must emphasis the great service, I don’t think Roxanne ever sleeps as I always got an immediate response to my emails no matter when I sent them.

We used this pump on a recent adventure touring trip, and it worked reliably. I really like the flexible hose that attaches to the stem, which reduces the risk of damaging the tube when inflating the tire. The accuracy of the inline pressure gauge is a bit suspect, but it provided decent general feedback and then, from there, we inflated by feel. Lightweight and durable, it stored easily in a pannier pocket for easy access.

I spent literally a week looking for the best pump because I'm one of those who doesn't want to be returning things so I do my best to make sure it's right for me. Yes it takes sometime to pump but after super gluing the core of my presta valves in as many people recommended I really had no issue and actually super glued the core to my replacement tubes.It is a bit bigger than I expected which is good because it means more air, less pumps. it's so easy to use and carry, except 70-100psi is a workout.Picture the last pumps as a workout and picture having big arms and it'll be a fun time. I tested on my road tires and my dad's mountain and I definitely would prefer a pump that switches from high volume to high pressure for thicccccR tires.EDIT: 2 months later, there pressure gauge is now leaking air and won't let me pump past 60psi on my 140 psi tires. Glad it was at home when it happened. Now I'm looking into a new pump that is NOT by this brand. I'll be going with Topeak from now on. Also I noticed it would heat up every few pumps which gave me blisters on my fingers.

Used on my 6000 mile bike tour through Africa. My bike has shrader valves and it worked really well. Small and compact. I reached out to support when I needed a replacement rubber cover which I lost (my fault) and they were friendly and quick to send me a replacement free of charge. I recommend this to anyone who needs a small light pump.

This is a very awesome Tool! essential and necessary to ensure you always have an air source for your bike. It is professionally packaged expertly explained and there is even a video that the owner of the company wants to make certain that you understand how to use it properly. The pressure gauge is easy to read and is accurate too. The customer care is totally mind blowing... as shortly after the pump was delivered, a personal message from the Owner “Chris” was received via email to not only ensure the product is as represented, the email offers a link to the video and offers the Owner’s Personal Thank you for purchasing the Pro Bike Tool. Oh did I mention the professional feel, construction and packaging? Have a L👀K See!

This actually does seem to work well enough to get 80psi or so into a road tyre with breaking either you or the pump. I can't really see the gauge being a lot of use, but that's immaterial to the fact that it's sturdy, doesn't get too hot to hold in use and has a big enough handle end to grip firmly. I prefer the flexi-type attachment to the valve as well.On the whole I am pleased with it and have used it out on the road a couple of times. It replaced a super-super-lightweight carbon one which was lovely to look at, light to carry, and completely useless as a pump.

Waited until I actually had to use it before reviewing. Design is very sleek and the connector nicely contained inside the main housing.To be clear - its not a magic wand - it still takes a lot of work to get a tyre to 60+ psi - however compared to cheaper models which don't seem to do anything even after 10 mins of pumping this one actually works.The red indicator for tyre pressure is an absolute must for any cyclist using high pressure tyres...Overall - its a little pricey - but the old adage is true in you get what you pay for..

I seem to be the only person on here who paid full price for this thing!! This review is GENUINE and not influenced by cheap gear, however Mr Pro Bike Tool please sign me up for discounts because this thing is really nice and I would like to try more of your stuff.This pump is LIGHT and TINY and is really just what I was looking for. Got my road 700c road bike tyres to 100PSI without too much effort. The design of this pump is very ingenious and the metal fittings fit together beautifully with very well machined threads - no nasty sharp edges. The inclusion of O-rings on all connections is lovely too. Overall I'm very impressed and will keep my eye out for this company, this thing feels like it will last well.

Great pump for any MTB, compared with my old dual action pump, this new single action pump is quicker and easier to use compared to a dual action pump.The clip that goes on your frame is ok but a bit fiddly to use than my cheaper pump came with but it holds the pump more secure.You may find the hose can be an issue with a presta valve if you have slightly damaged the valve were it is bent due to using a poor pump, I found using this pump I’ve not bent any more presta valves.If you are using it on a presta with a removable core best to make sure it’s tightly secure.I lost one of the dust caps on mine out on a ride, contacted them to see if they sell spare parts and they sent me free of charge a spare one, how cool is that.All round a great looking pump and the hose will prevent damage to any presta valve users out there and I find single stroke pump easer to use than a dual action one as it’s easy to push pressure into a tire but hard to pull pressure into a tire.

As others have stated, the pump is beautifully made. There is no doubt about that! It really is nice to behold and to handle. I have seen perfectly serviceable student microscopes that were not engineered or finished half so well as this little pump.At first I was thrilled.... until I came to USE it, that is. Then I did run into problems...1) I couldn't connect it satisfactorily to the Presta type valve of my tyre's tube, despite screwing the connector a long way down on the valve stem. Indeed, I got the feeling I was actually closing the valve up again by the act of screwing on the connector itself. I don't know this for sure. I just know I couldn't get ANY air in at all through the Presta end of the connector.Fortunately, that changed when I swapped to the Schrader end of the connector, which I was able to use by means of an adaptor I already owned. With the Schrader adaptor on the Presta valve I could see before connecting the pump that the valve was still in the 'up' position, and therefore capable of admitting air.2) Whilst I could get air into the Presta valved tyre with the Schrader connector and an adaptor, there was no way I could raise the pressure above about 40 PSI, as indicated by the built-in gauge... (and confirmed by gauge on separate foot pump). I tried strenuously to get to higher pressure for quite some time; for about 25 minutes, in fact.. in three-minute or four-minute bursts of vigorous pumping action.But, no go. I just couldn't do it.Because I know how hard I tried to get to the 60 PSI mark, I am quite surprised if anybody could ever reach the 120 that is claimed for this pump.It happens that, although I was aiming for a pressure of 60, just 40 PSI will suffice as a get-me-home without damaging the tyre.3) Because of all the effort I had put into pumping, I discovered the handle is pretty uncomfortable in use. Not only does it not have a fold-out T-bar design to spread the load across the palm of the hand, there isn't even a smooth end to the handle to push against. Instead there is the threaded boss where the connector tube goes inside, and that gets to be quite sharp and painful after the first two or three hundred high-strength pushes! Neither can the captive rubber dust cap be used as a cushion, because it doesn't fit when the connector tube is not inside.So, although the pump is very nicely made, and the little storage holder is also pretty good, I cannot honestly recommend it... well, unless you are riding on Schrader valved tyres run a bit on the soft side ??

The pro bike tool is just that a professional bike tool . It's compact and lightweight weighing only 147g . Fast and easy tire inflation so your not pumping forever with some of the smaller pumps you can get.It's high pressured going up to 120psi / 8.3 bar .The hose is flexible so less chance of breaking a valve. It's got it's own integrated pressure gauge for perfect inflation.It's comparable with both presta and Shrader valves . It includes it's own mounting bracket and it's got a sturdy strap so you don't have to listen to it rattling around as you rude along .So all you need to do is remove your dust covers from the top and bottom of the pump . These are another good thing as when your going through water or getting rained on the are protecting the insides from the damage water can do.Then you just unscrew the hose from the pump handle attach the side you want depending on your tire valve , attach to your open valve and hey presto start pumping it's surprisingly long for this cute little pump . In fact it's so quick I've pumped up both bikes in no time at all.

Questa pompa Pro bike a mio avviso e una delle migliori che io abbia provato e visti in giro. Per prima cosa nei dettagli e molto curata, e molto leggera circa 127g, e lunga solo 22cm con una potenza di gonfiaggio di 120psi/8.3bar. Ha una pratica manichetta flessibile con un misuratore di pressione integrato molto utile e pratico,anche xe questa manichetta in entrambi i lati ha due sistemi di gonfiaggio da un lato per valvole Presta, da un'altro lato Schrader in entrambi i lati con filettatura per preservare e non danneggiare le valvole. La manichetta è a scomparsa cioè entra completamente dentro la pompa in modo da non intralciare e di essere molto comoda durante il trasporto. In dotazione troviamo pure una staffa per montarla sul telaio della propria bici. (un mio consiglio e di installarla sotto il sellino).ottimo la puntualità del venditore diciamo in 48 ore lo ricevuta a casa, io ne ho prese due una rossa e una nera.Aggiornamento al 6/agosto/19: mi sono trovato talmente bene che lo presa anche rossa.... Oltre il colore riconfermo che è ottima.

I wanted a pump to fit easily in a bag rather than leave it on the bike. I found two similar products, one of which was a 'mini' pump and this one which was not so described. It is well made and a very effective design. It is tiny compared with traditional pumps and is much sturdier. The gauge is rather like a mechanical car tyre pressure gauge, but is in-line with the flexible hose.I found that my rear tyre pressure was lower than advisable and needed to change from 70 to 80 PSI. Five or six pumps were all that was necessary. I think I might use this on my old racing bike.Two minor points, the wheel may need to be rotated to see the pressure markings (Bar or PSI) on Schrader valves. Once the connector is tight, the gauge marking to connector relationship is fixed. The other is that the plastic bike mounting clamp provided is only suited to certain frame designs. The latter was, of course, of no interest to me.

I ride a road bike, with tires that need inflating to 90-100 PSI. On long rides, I've had to carry a CO2 cartridge because I've never had a hand pump that could get past 60. Saw this on Amazon, was convinced by the reviews, and wow, what a product it is.Not only does it get me tyres to 100 PSI comfortably, the fact that it's a perfect seal once you screw it on makes pumping an enjoyable and easy experience. The gauge seems to be accurate as well. I can foresee a slight issue if your arms lack power, but getting to 70-80 PSI should still be very manageable.Only possible point for improvement might be getting more ease of 'latching' onto the Presta valve, but it's really a small gripe. Well-deserved 5 stars. Will recommend to everyone I know.

Usage - fitness cycling so lightweight and small essential.Quick delivery.Well designed and obvious a deal of considered thinking put into the design.Made this purchase based on the positive reviews received from purchasers.Of an age whereby I have seen and used a lot of hand pumps and confess to being a little disappointed that this has a small amount of 'play' in the piston where it emanates from the lower half of the pump. I remember some plastic pumps with leather washers and brass nuts that had less wobble.[At present this item has just been unboxed, and has had no use whatsoever.] The components at the end of the piston shaft, below the metal securing ring are plastic, and I am concerned as to how these may wear with use and if the 'play' in the shaft will worsen.It may be that the movement will not increase, but I remain; in light of all the positivity about the quality of the engineering, a tad miffed.This may be a manufacturing flaw whereby the sizing/machining tolerances for the lower tube have slipped outside of the set parameters ... ?ExRx

So i haven't actually used this pump in the field yet but i did use it to fix up an old tube. so i am able to say it definitely works .It is very well made, just looks it & feels it.It is the perfect size for in my pack so will be out with me on every ride. One mate caught site of it in my bag the other day & hauled it out to look. he was impressed & said he would riding close by cos he knew i would be able to help if he had a puncture.shipping was fast & protected my order well. - All good thus far

Lightweight package and nicely finished. Pumps ok - unfortunately the thread isn’t very nicely cut on the pump and so has a propensity to unscrew some presta valve cores. You need a presta adaptor to prevent this with fragile valves. Not what you want to happen on the trail. Also - it’s about 20 pumps of the handle for each PSI - that’s a lot of pumping. Finally - the PSI indicator is accurate to approx 5 PSI - a more graduated scale with more accuracy would be a good thing that is missing.

Great tool, a fellow rider happened to have one when I was a stranded in grizedale forest with not enough patches, no spare tube and a pump that should have been tossed years ago. It worked. I didn’t give it enough pumping tho as less than 10 minutes later I’d twatted another rock and given myself pinch puncture #2 of the day.But a compact, sturdy design, I like the built in gauge, and the fact that it actually screws on to the valve, not just relying on some naff lever to hold it in place. In fact I’ve used it this evening to help me fix the two knackered tubes in the comfort of my kitchen, instead of on the side of a bridleway.I’m hoping not to have to use it too often but when I need it I know I’ll have something decent.

Poor product (I had to up the rating to 2 star as 1 star was invisible!). Yes the pump itself appears to be nicely engineered however on a road bike with the velcro attachment it simply will not stay put and extends during the ride and constantly rattles which is very anoying. It is fitted to the bike as guided which is simple to do but it just does not work as good as cheaper alternatives. Plus you cannot use with removable valve tubes as it removes the core. Waste of money (and a lot for pump) now having to purchase another cheaper and better option as looks are not always a sign of performance.

Nicht nur die kostengünstige, stabile und sehr gut gearbeitete Pumpe gefällt, auch das Manometer zeigt sehr genau an. Dazu gibt's eine sehr gute, anschauliche Bedienungsanweisung. Und am besten gefiel mir der überdurchschnittlich gute, kulante und zuvorkommende Kundenservice von ProBikeTool: Nachdem die alte Halterung gebrochen war, wurde mir auch nach 1 Jahr nicht nur kostenlos und besonders schnell die neue und verbesserte Halterung zugesandt - sie war auch von einer überaus netten eMail und einer freundlichen Karte mit persönlicher Nachricht begleitet: Perfekt, so wünscht man sich das, und so habe ich das hier noch ganz selten erlebt!!