AIRAJ PVC Pipe Cutter,Cuts up to 1-3/4" (1.75''),Ratcheting PVC Cutter Tool

For homeowners making changes or repairs to their plumbing, the use of PEX has been a real game changer.Whether you are using a Shark Bite push-to-connect (PTL) or a Crimp approach, you will still need to cut the existing PEX line and the new PEX material. Th AIRAJ Pipe cutter is a valuable tool to ensure your cuts are clean and you can do so quickly with little effort. My package did not have instructions for use, so I played with some old PEX tubing to get the hang of it. Basically, you need to ratchet down one click at a time in order to make the cuts. The alternative of a hack saw, pipe cutter or any other methods is just not viable. Spend the $10, you will be very glad you did!

I am a licensed plumber. I work frequently with 2" schedule 40 pvc. I am excited to recommend and review this large up to 2.5" cutter by Airaj.My previous cutter was the Ridgid 2375 cutter that cost me $95 at Home Depot before tax, so over $100. It never worked that well but I thought this is what it is, either you deal with this or you get the hack saw. The Ridgid cutter would squeeze the pipe with great pressure and you can see the pipe actually bend before the blade begins to cut. This is because the blade lays flat across the pipe. Unless that blade is brand new it is going to squeeze and sometimes snap the pipe. In colder weather it's even worse. If you are trying to cut less than 2" of pipe forget it, get the hack saw because the Ridgid cutter will simply snap it. To make matters worse, the Ridgid pipe cutter has a cheap plastic clip that holds the handle closed when not in use. That clip broke within 6 months so these cutters are always wide open in my tool box with the sharp blade exposed. Finally, the Ridgid pipe cutter is very difficult to change the blade. I know their video makes it look easy but that guy is probably a magician and besides that he's working with a brand new tool. You have to push on one side and then press on the other. I couldn't do it, both sides were stuck. Lets see him try it with my old worn out tool.O.k. now let's talk about the Airaj cutter. First of all, at around $25 after tax it costs less than a replacement blade for my Ridgid cutter; yet the quality is apparently the same - it's all metal construction. Now the best part- look at my picture, look at that blade. The blade is not straight, it's a triangle, it PIERCES the pvc, not presses on it flatly. It instantly punctures the pvc and cuts it like BUTTER! I can cut 1/2" at a time if I want to without snapping the pipe! Next, look at the closing holder, it's made of metal. Yes, it can still break, but it won't break as quickly as a cheap plastic one. And if it does brake, I can get a paper clip or whatever piece of wire to go through the hole. Can't do that with the Ridgid! Finally, look at how easy it is to change the blade. There's a screw. Imagine that! Remove the screw and the blade comes out, Old tool or new tool, I know how to remove a screw. No magician tricks required.

Used product to install drip irrigation in garden. Worked perfectly cutting straight clean ends.

This thing worked great for cutting schedule 40 PVC pipe. Needed to replumb the drainage pipe for a sump pump and had to get something to cut the pipe coming from the ceiling. Typically I use my miter saw to cut PVC but that would obviously not work in this situation. This thing cut super cleanly and went through 1 1/4” without any trouble (ordered the larger 2 1/2” one). I can’t imagine it would have any trouble with larger pipes as well. It cuts so much cleaner than a miter saw too I don’t even have to sand down the cut edge at all.

Awesome rust prevention on this one. I used it to demolish some PVC pipes that were no longer needed. Also a couple other small things. Accidentally left it outside in the weather and it was still looking new after spending a month or more being outside in the rain. Wiped it down and put a little bit of oil in the joints and moving parts and it looks great and works great too. I’m very impressed and pleased with this incredible inexpensive tubing cutter and expect many years of use from this tool. I will really try to keep it in my plumbing tools box and out of the weather from now on

I bought this plastic pipe cutter to help me cut a golf ball cutter just enough to allow me to remove half the cover on the golf ball. It's not designed to cut down about one eighth of an inch all around so I can pry the cover off of one side of a golf ball. It is a great plastic pipe cutter!

Complete trash. Cannot cut pipe straight at all. Don't waste your time and money.

I'm no pro craftsman, but I do a lot of my own work on plumbing and electrical as I grew up on a farm where we had to and would consider myself an experienced DIY'er. I used this cutter twice on 1-1/4" CPVC (schedule 40). The first cut did ok - I noticed that the ratcheting mechanism was much more difficult to operate than a similar style cheap cutter for smaller CPVC I got at one of the big box stores. That being said, this cutter returned to the open position much easier. I bought this as the 1-1/4" CPVC either maxed those cutters out or was just on the edge of their size limit and usually left some material on the CPVC I had to trim down. I'd guess that first cut was into material that was 50 degrees F.On the second cut (probably 35-40 degrees F) in a trench the cutter got stuck and I couldn't get it to index to the next spot on the ratcheting blade. Admittedly, this was in a narrow trench where I can't guarantee the cleanliness of the bottom side of the conduit. The cutter was stuck in the conduit about 1/3 to 1/2 of the stroke and wasn't going to budge without forcing through the cut, so I used two pieces of 1" CPVC conduit as cheaters (around 10" long). I got through the cut, but it took a quarter inch or better chunk out of the blade and snapped the conduit worse than my small pair from the big box store. The chunk was near where the bottom of the conduit was, so it's possible something like a small gravel was stuck to the bottom, but I don't think that was the case. I was so frustrated with the cutters (and job) I threw them away without giving it a second thought.Since I was cutting in cold weather in a trench with cheaters, I usually wouldn't leave a review and call it my fault. I bought another pair from a company I'd heard of for about 3x the price as the job isn't complete, and due to the difficulty of operating the ratcheting cutters on a conduit size much smaller than the pair was rated for, decided to give the product 3 stars.It may perform well in "more ideal" conditions, but if you're buying a set to be your go-to in your plumbing/electrical kit when you need a reliable tool, I'd suggest you look elsewhere. If you see yourself potentially in a situation like the one I described, I'd at least suggest one with readily available replacement blades.

Better unit than ones with straight blade way easier on hands. Cuts HDPE 2in IPS Dr11 like it’s butter!

I use these on septic systems to cut poly pipe approximately one and a quarter inchThey work excellent for tight areas that I need them for they work unreal on hard pipe PVC and ABSI have purchased three sets of these now and use them almost every time I have a job

Tip broke

Got it, tried and had a big smile on my face, easy to use, does not take much strength to use and cuts right where it is supposed to

The tool cuts are perfectly straight and cut with ease