EBC Brakes FA630HH Double-H Series Sintered Disc Brake Pad, Black, 1x1x1

Works on Brembo calipers for a 2024 Indian Challenger. Remember to clean the caliper before installing pads and bleed lines. Very good response and feel on the lever. Smooth braking down to a complete stop. Highly recommended.

These are perfect for my 2016 Ducati scrambler 800

They work just fine

Quick shipping! Great initial and hot braking and no glazing potential as expected. I would not recommend these pads for a new or nervous rider that doesnt have ABS; very agressive initial friction zone and can overheat brake fluid quickly. These are quieter than oem indian semi-metallic pads, much less brake dust.

I have a Kymco AK 550. My dealer quoted me these pads as the correct crossover for the OEM front brake pads on my AK. The EBC FA630HH pads. I received these just today and pulled one of the pads from my bike and compared them. They are an exact fit and perfect match to the OEM pads with one difference. There are 4 segments of pad material on the OEM brake pads and one segment on these. If I were racing or doing extreme riding I might be concerned about cooling due to that difference but I never intend to do that kind of riding. Besides, I don't think the AK is capable of stressing these pads that much anyway so it is a non-issue to me. Braking is VERY GOOD on the AK. There are also a semi-sintered pad, the EBC FA630V V-pad. Same fit but not full sintered. The OEM pads are sintered but either pad will work on the AK. Amazon's confirmed fit indicator says these pads do not fit the Kymco AK 550 and does not suggest any alternative. I can confirm these EBC FA630 pads DO INDEED fit the Kymco AK 550. I dropped one star only because I have not permanently installed them and tried them out in actual performance yet since my AK still has more than half the pad material remaining on all the pads. I wanted to have a set of pads on my parts shelf for when I am ready to replace them on the bike.

I used these on my 2014 R1200GS and saves SO MUCH $ compared to BMW dealership! Buy with confidence, they are the same product at less than 1/2 the price! That's why BMW = "Bring my wallet"

I had to install a new front rotor on my Ducati scrambler because the original was defective and warped. So I got these brake pads at the same time and they work as expected. I have a set of EBC pads on my 2000 Kawasaki W650 that I installed in 2003 and they’re still like 3/4 life.

llego a peru en 5 dias pero el reparto aqui demoro 5 dias mas pero llego en perfecto estado solo falta probar para mi cfmoto 450sr 28/05/2025 ya lo instale le da perfecto en mi moto cfmoto 450sr 2023 tengo una duda si ira a afectar al disco mas adelante agrego mas comentarios

Very fast shipping

Fits perfect on my 2019 Can Am RTL

Tel que dans la description

Everything was as advertised

I purchased these pads because I really liked the improved performance of the sintered pads purchased for my bike back brake. These pads did not perform anywhere near as well. I found that after a few rides, they started to make a LOT of noise and never seated even after 2000km of mixed riding. I've tried cleaning and resetting the pads a couple of times, but no luck. I think mayber these pads were made on a bad day or with some other compound mix. They are NOT better than the cheap stock pads I replaced. On paper, they are the same pads front and rear. Not so in actual use.