Gigabit PoE Injector 48V15.4W Power Adapter, IEEE 802.3af Compliant,10/100/1000Mbps RJ45, Compatible with Ubiquiti U-POE-AF, TP-Link TL-POE150S, TRENnet TPE-113GI,EnGenius EPA2406GR

I recently acquired a Gigabit POE Injector, and it has been nothing short of a game-changer for my NeatPad setup. This device not only met but exceeded my expectations, making it a perfect replacement for powering my NeatPad through Power over Ethernet (PoE). Here's why I'm so thrilled with it: **Effortless Installation (5/5):** Setting up the Gigabit POE Injector was a breeze. The plug-and-play nature of this device made the installation process straightforward and hassle-free. I had my NeatPad up and running in no time, without the need for complex configurations or technical expertise. **Seamless Power Delivery (5/5):** The Gigabit POE Injector provides a seamless and consistent power supply to my NeatPad. It effectively replaces the original PoE injector that came with my device, and I've experienced no interruptions or power-related issues. **Reliable Gigabit Performance (5/5):** This POE Injector delivers on its gigabit promise, ensuring fast and reliable data transfer alongside power delivery. It's a noticeable improvement over my previous setup and has contributed to smoother data communication and seamless connectivity. **Sturdy and Durable (5/5):** The build quality of this POE Injector is solid. It feels durable and robust, and I have complete confidence in its long-term reliability. It's built to last and withstand the rigors of daily use. **Cost-Effective Replacement (5/5):** I found the Gigabit POE Injector to be a cost-effective replacement for my NeatPad's power supply. It not only functions seamlessly but also offers an affordable alternative to replacing the entire PoE setup.

I have quite a bit of Cisco WAP571 Access Points that are pretty finicky about their PoE requirements, they are 802.3at standard but they need a 55V adapter with at least 30W to work, now, they don't need the 30W, they actually run with less than 15 but won't turn on the dual radios full capacity if you don't use the recommended PoE injector from Cisco (too expensive) or a Compatible switch. This adapter did what many others didn't and on the cheap side. AP powered all the way up with both radios full blast no warning messages. Very happy :) it says 802.3af/at/bt compliant in the back, the picture is just like the product I received. thank you iCREATin

It arrived on time and works as advertised. I am using it to power a HPE/Aruba WiFi IAP-325 AP which requires about 26 W of power (56 V, 450 mA DC). At 30 W rating, there is some headroom left. Since the injector powers a *single* POE device only, you don't have to take into account the full "power budget" in POE switches. Just make sure your POE appliance does *not* draw more than 30 W of power. Also, the Gigabit NICs match in performance, perfectly with the AP's Gigabit NIC. I am happy with it and recommend it for powering POE devices.

worked well for application

I needed an injector that supported 802.3at which I think is less common than AF. So, I'm glad this supports AT for my immediate needs but also can support AF if I need that in the future. My device powered up, no problem so I'm quite happy with this purchase. The brand name reminds me of that banned supplement from the 90s but whatever... the device is good. :D

Does not work. No power. I used a POE tester and a volt meter to verify. A different POE injector (same cables, same device) works just fine.

I got this to power a remote sip/VOIP enable door bell. It worked. No complaints or surprises.

Works as expected, provides gigabit Ethernet passthrough just fine

These are NOT compatible with EnGenius EPA2406GR. I brought my Engenius ENH500 unit down from where it was mounted to do some bench testing with it and used this PoE injector to power it. The ENH500 would not power up and light on PoE injector was flashing. Disconnected it and the light went solid green. Connected to the original PoE injector and my ENH500 is now damaged and will not power up with a known working injector. DO NOT USE WITH ENGENIUS DEVICES!!

Doesn’t seem to actually send 30W of power. I have a few JVC PTZ cameras I was hoping to use over PoE and these would power up the camera but provide an error which was associated with being under powered. I have since put in a PoE switch instead and had success.

Compact and light. Has 90W of power. Good for most applications. Use it to inject power to a roof-mounted HIKVISION camera. No problems after over two years use.

A+++++

Hardware failure with my AP since I tried it. As soon as I plug the network cable, power cut every sec or so