Fan Power Supply 100-240v AC to 12v DC 1A Output 3pin or 4pin PWM Connector AC DC Adapter

It works as expected.

This is a high quality unit, "cooler guys" branded. Works perfectly for powering multiple fans to cool my led lights, as long as you keep the power consumption somewhere below ~6-9 watts of continuous power ( ~80% of the rated power of the device for safe continuous draw ) I noticed the device starting to become just a little warm around 6w of continuous draw so I decided to order multiple power supply units and split the draw so I could run them well within range, You can add splitters and keep adding as many fans as you want, just dont exceed the rating of 1 amp ( equal to 12 watts ) Also tgtis device does not use hardly any extra power to run the fans compared to my computer power supy unit that I was running the fans off, using ~25 watts right off the top, these use hardly any extra power, I couldn't tell a difference with my killowatt meter, 25 watts here and there make a big difference!!

Worked like a charm!

This is a hard to find product with only two options that I was able to find on Amazon. This power supply is compact and the cord is plenty long enough. I am using it to power 3x Noctua NF-A20 PWM fans through a Noctua NA-FC1 Fan Controller without issue and the power supply remains cool to the touch. This power supply was just what I needed to complete my DIY cooling solution for the equipment in my StarTech Network Rack, Model 4POSTRACK25U. The DIY solution is working great so far. Pictures included and parts list below. Parts List: (QTY 3 ea) https://www.amazon.com/dp/B071SLFBNY/ref=cm_sw_r_cp_apa_i_8XCqFb924N5D7 (QTY 1 ea) https://www.amazon.com/dp/B072M2HKSN/ref=cm_sw_r_cp_apa_i_0ZCqFbRH5NWPC (QTY 1ea) https://www.amazon.com/gp/product/B084JG4619/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1 (QTY 3 ea) https://www.amazon.com/dp/B07RFHZCKZ/ref=cm_sw_r_cp_apa_i_7YCqFb6AZRJV4 (QTY 1 ea) https://www.amazon.com/dp/B00KG3K9AM/ref=cm_sw_r_cp_apa_i_CHhrFbZ0RJ9FE (may not need depending on where you mount the Noctua controller) Plus: (QTY 2 ea) 3/8 in x 48 in Steel Rod (QTY 12 ea, 4x ea per fan) 3/8 in Rubber Insulated Metal Clamps (QTY 12 ea, 4x ea per fan) #10-24 x 1 3/4 in Machine Screws (QTY 24 ea, 8x ea per fan) #10 Flat Washer (QTY 12 ea, 4x ea per fan) #10-24 Nylon Lock Nut (QTY 1 ea) 2 in x 2 in Board

The cord works, but provides an inconsistent power supply. Great for the price though.

This is a 12v 1 amp plug in adapter to covert 120v AC power. It has a connector for a 3 pin computer fan. I plugged this in and it worked instantly to power a 12v computer fan being used to cool a free standing gateway/nvr device. Soon after, the internal temperature of the device dropped 20 degrees C. This adapter is working fine. It is a bit hard to unplug the fan connector from the adapter’s connector. But this is attributed to the type of connectors being used, which has a tight locking tab that needs to be lifted to unplug. I am pleased with this item.

Works perfectly for powering a computer case fan for a project I have. Nice build quality, great price.

Item is as advertised. The power adapter is very compact and small. I believe that this a solid state switching and not a transformer type power supply. I use this to power two 92mm PC case fans for my soldering fume extractor. It powers both of these fans with no issues or heat buildup.

Lo utilizo con un controlador Noctua y la verdad es muy potente, es compacto, muy buena calidad.

Worth it

This will be used to supply power to my electronics.

Lo compré para un ventilador Noctua externo. Los USB no me daban confianza porque necesitaban más pieza su había gente que mencionaba que se derretía. Este hace lo que debe hacer como un campeón. Directo a la pared y práctico.

Enviado y recibido en tiempo y forma, incluso llegó antes de lo planeado. Funciona bien