XPEL Door Edge Guard Protection Film Roll, 1/2" x 100' - Car or Truck Doors, Protective Barrier Against Minor Scratches, Paint Chips, Door Edge Impact, and Dings - Prevents Damage and Possible Rust

Love this stuff! I originally thought it would be a real pain installing it but boy was I wrong. Easy install and looks great! The edges on one side is a little rough but I just put it on the inside edge. Sticks well to the car and forms to the curves well.

Worked great and install is a breeze. Looks great on the truck and definitely protects the doors.

This stuff is fabulous. Super easy to install/apply, invisible after installation and works really well to protect your door edge or other people’s door dings. If you put out $100K for a car, this should be the very first thing you do to it.

This edge guard is a rather thick, clear tape that adheres to the edge of your door, in order to protect it from damage. I haven't made it a point to smash my door into anything, but i've had this product on for 6 months and so far it's holding up well to weathering. It all but disappears once installed and sticks like crazy. I chose to install it wet, as it allows a bit more time to position and get the air bubbles out. In a day or so, the moisture will escape and it will hold just as if it was installed dry. If you can't apply scotch tape without messing it up, don't buy this. This is a great product, but you need to read the directions, follow them, and take your time. If you do it carefully, you'll have a professional-looking install at a low cost. If you're not the patient and handy type, find a friend who is. Buy them a beer, then give them a pair of scissors and a spray bottle. Maybe not in that particular order... October 2011 Update: Some folks have commented that this stuff isn't all too durable. I'm starting to agree, but also don't know what else would really replace this product. I've since replaced my original installation, as the "pointy" part on my door edge did wear through all the way. I open my doors very carefully, but i do own a 2-door car (long doors). When i park in your typical California "compact" space, there isn't much room to open the door. I often have to let my door touch the adjacent car. This light use has led to the material wearing through after a few months of use. For this reason, i've knocked my review down to 4/5 stars. Removing the old product was easy and it came off cleanly. I've since redone both door edges with a new strip of material. I've also added a 2nd layer over the one spot i had trouble with wear. Overall, i still think this is a good product, but it's not bullet-proof. July 2014 Update: Just redid our 2-door car again, as after a couple years, the material was showing some wear. It came of pretty clean after 2+ years in the California sun. A quick wipe with alcohol removed any bits of residue. It was 15 minutes to do. I've started applying the product dry. I start with the outer side of the door. Once that's stuck on, I massage the material around the edge and inside of the door. Looks great.

The best for door edges

Product is of okay quality. Along the entire length of the 100’ roll there was excess glue/ppf that would bunch up as I unpeeled the roll. There was a couple times during install that this ended up underneath the tape and caused bubbles/defects with the install. Trying to get these pieces out was frustrating and also caused accidental stretch lines in other spots.

We bought this for my wife's car. I didn't even know this existed, except I noticed it on my car, the same year and model as hers, but purchased at a different dealership. So we added this to her car to protect the door edges. I was expecting it to fall off after some time since it's basically just sticks on with an adhesive, and we live in central Florida where the sun and heat are brutal in the summer along with a lot of heavy rain. She parks her car outside during the day when she works, so the car is exposed to all of this, and so far (after 4 months) it hasn't started peeling off yet, so hopefully it will continue to last. It was easy to apply -- simply cut to length and stick it on the front edge of the door, then wrap it around and push it down as you move from top to bottom. I had to peel it back a few inches and try again a couple of times while trying to following the curves and folds of the door's body panel, but I was ultimately able to get it on with no folds or bubbling. Since it's clear, it's barely visible unless you look carefully once it's applied.

This is poorly cut on the edges. When you pull off a section to apply, there are thin pieces on the edges that keep getting stuck on the inner part that has to stick to the vehicle. It was not expensive, nor was it super cheap, BUT it's not worth buying. Even if I were offerd it for free, I would not take it. It's frustrating to apply due to the thin pieces that ONLY appears when you remove the paper so you can stick/apply it.

Great item. Very discreet and does the job very well. Will buy again

Didn’t stay long time after few months they started to detach 3m product are more durable

Mala calidad del producto segui instrucciones del video y la mica protectora se despega

El producto cumplió con las expectativas que necesito en calidad y apariencia Me parece excelente

This is a great option for capable and patient DIYer’s. Product is of high quality and be sure to wipe your door edges with alcohol prior to applying. I used a heat gone for 1-2 minutes to ensure adhesion. Worked great!