Canpump CF 3030 G: 3000 psi @ 3.1 US gpm, 3/4-in Shaft Pressure Washer Pump

I have an old Honda gx -200 the chemical valve broke the other day and I tried everything to fix it. Anyway, I decided to just buy this brand new pump. It arrived today. It came with oil inside the pump. Which was excellent. It fit perfectly. You will need the 4 bolts your old pump has and also the key. There was not a key in the kit or the 4 bolts. Which is fine but just an fyi. Be sure to not loose the key (metal bar)in your old pump when you take the old pump out to replace it. It’s literally just a little rectangle metal bar. The key will fall on the ground. It took a minute to line the key up with the pump. I just lightly pulled the started cord to move the pump shaft around. Took maybe 15 min to put the new pump on. One seal was loose in the package so it took me a little while to figure out where it went. The directions were great. I checked the oil. Came with 50’percent oil in the pump. Started it up with the water hose and gun attached and it felt like it had about 100x more power then the old pump. I used it for about 20 min and it worked amazingly well. So far so good. I will up date the review after a few more uses but so far five stars. Update. Used the pump today on a fence and then a concrete wall. Ran for maybe 2-3 hrs straight. Works great!! It’s like having a new pressure washer!

I purchased this pump for my Dewalt DXPW3025 3000 PSI pressure washer after the stock AAA 8.7Ga12 pump blew out for no apparent reason. The pressure washer uses a Honda GX160 engine, which is on the lighter side of the engines mentioned here in the reviews.As you can see, the CAN Pump is a perfect fit. Installation is a breeze, it literally is four bolts holding it in to the keyway, so you merely rotate the input shaft to match the keyway and the pump will bolt right on.Don't forget to add oil! This pump doesn't come with any. I purchased the Amazon Mi TM AW-4085-0016 "power washer pump oil". A bit pricey for the bottle size and it is just short of the right amount. Similar oil is available at a particular "orange" store near you if needed.Note that the sight glass (pictured) will read just shy of half full if you pour in the entire bottle. When the washer is in use, the oil level drops to almost nothing in the sight glass! At first I thought the oil was gone, but when the pump was shut down the sight glass level gradually returned to the halfway mark.The pressure is what my old 3000 PSI pump used to do - this one is the same PSI but 3.1gpm rather than 3.0 but I didn't really notice a difference. The Honda drives it without struggling and it performs well. Time will tell how long it will run, but I am hoping with proper maintenance and "pump protector" fluid between uses I can get as much or more usage out of this beast.Overall I am pleased with my purchase and it was a lot cheaper than dropping $700 or so on a new pressure washer.DECEMBER 1 2021 UPDATEThis pump is still going strong! I remain very happy and do recommend it.

Came super fast like 4 days it's good considering Christmas delays. Actual product I couldn't be more happy with, my machines preforms way better now and I know it'll be even more reliable too.

So my O.E.M.Technoligies pump which had around 40 Hrs. on it (& was working fine) started to have a slight oil seepage at the bottom I figured Hmmm time to replace it. They are good for around a Hundred Hrs. so I plan on selling it for $40-5. The new pump had to be relocated because it didn't clear the handle. No big deal it took about an Hr,& was EZ. Right off the increase from 2.3 GPM was noticeable. I set the downloader to 2400 PSI & which seems perfect. It looks well made & works flawlessly. We'll see how durable it is.

Canpump CF 3030 G: 3000 psi works perfectly and been in service now for several months using 4 times a month.

The pump went out on my Dewalt pressure washer. I decided to just get a replacement pump instead of buying a new pressure washer since the engine on it is a Honda GTX200 that will probably outlive anybody reading this. I bought the pressure washer used about 8 years ago, and it has never ran this good. The flow rate and pressure is much better than the old pump and I like the fact it is adjustable.

I replaced my worn out 5hp Honda gc motor and 2200psi/2.5gal /min axial pump with a new Honda gx200(6.5hp) and this bad boy triplex 3,000psi/ 3.1gal/min and it is a great match. I haven’t put a pressure gauge on the outlet yet but it has plenty of power to clean about anything you need. No cavitation issues like the old axial pump had. It just blast water for hours on end. Just finished a driveway at the lake and it ran 8 hrs nonstop the first day and 10 hrs the second. Wore 2 guys out. Got the gx200 for just under $300 and $200 for the pump. $500 with donor cart, hose and wand. That’s $1,000 piece retail. Couldn’t be happier. Wanted to build one for years and kept putting it off. Kicking myself now. If you need an upgrade don’t hesitate.

Looks quality and appears to fit my application.Was disappointed to see what was listed as a Italian pump,sold by a Canadian company,from a distributor in Pennsylvania, of a pump clearly made in CHINA.Does come with extra o rings, and appears complete.Price does make it attractive option.