USX MOUNT Universal Soundbar Mount, Sound Bar TV Bracket for Soundbar with Speaker, Fits 2 Installation Options, Removable No-Slip Base Holder Extends 3.46”-6.06”

This was the replacement for one received yesterday missing parts. It slowed the install completion but Amazon is so good in fixing problems. This installed easily and my fire stick soundbar fit perfectly. Quality is great and it adjusted to fit tightly. Looks great!

The product arrived on time. I don’t know if the directions were bad or I had an Id-10-t issue. It took me awhile to determine that the soundbar mount would not fit per the instructions because of my LG tv design at the bottom. I overcame this by mounting it atop the wall mount and used spacers in place of the ones provided and had to run to the local big box hardware for longer bolts and nylon spacers. After that, it mounted over the hump at back bottom of my tv. Previously, my soundbar sat on a too small shelf and the IR couldn’t pick up the signal because the shelf was behind a desktop pc. So, far, I’m pleased. The soundbar is raised high enough that I no longer need to hold my arm in the air to adjust it. It sits snug on the soundbar mount perfectly centered and no more complaining, by me, because I had to raise my arm.

Worked well for a hidden sound bar mount

Bottom line is it was great value for money as my son bought the same one. Looks great, is functional and was easy to install on my TV mount. Hiding cords was a little difficult as I had to enlarge two of the holes to accommodate the wire ends. Do not let this deter you as your cables may fit without any issues.

Wall Mount,This particular soundbar mount from USX Mount (XAS002) paired with the USX Mount (XML008-1K-01) is a perfect pairing for a tight, square, plum, and ridgid mount for the two components listed in the title. And likely many other Samsung soundbars, such as the 60C, 990C and so on. I just picked the 910C as its the only Samsung Soundbar that's "packaged" with a Bluetooth surround speaker option that utilizes wired (audio wiring) surround sound speakers. We needed this particular style amp, as long ago I mounted our speakers in the ceiling behind each end of the couch and ran the wires though the attic and down through the wall. We are not a fans of free standing speakers.Plus, you need to run power to each speaker anyway, so you might as well go all in.You will see this amp mounted to the wall using two small bent shelf brackets using drywall inserts.For Soundbar to be tight to the underside of the TV,Two things, When facing the TV and imagining the TV and soundbar already installed you will end up cutting one segment (small hole end of the bracket) off of both sound bar mounts that run vertical behind the TV. This will allow the vertical soundbar mounts to go up far enough that the soundbar nearly touches the bottom of the TV.You can still access the TV switches. If you dont care if the bar is lower, then just leave them as is. It just seems to look better.When attaching the Samsung wall mounts to the soundbar, use two of the 8MM screws supplied with the vesa mount along with two standard washers and two fender washers and push the Samsung mount up as far as possible. The only thing you will utilize from the Samsung mounting brackets is the brackets themselves, you will not use the plastic grooved hanger washers.You will need two 8MM flange nuts, or standard nuts if you can find them, to use on the 8MM vesa screws.Make sure you use the appropriate supplied shim washers to avoid putting stress on the TV housing when tightening the TV, TV mount, and soundbar mounting rails together. These are included with the vesa mount. Also, make sure the soundbar mounting rails are between the TV and the TV vesa mount as shown in the pictures.Note,For those of you wondering what the extra box is in the picture, This is a MOCA system that converts RG-6 coax cable to ethernet. Probably the best way to distribute internet through existing lines when not using a standard router. We only use a MiFi 8800 puck from Verizon with one mesh unit and distribute the signal to multiple houses. No more Spectrum, Cox, ATT. No more raising the price after a month or so. Unlimited 4K steaming for two homes for a steady $65.00/month.This is by far the most sturdy assembly I've found so far. They pair well together for full motion of both the TV and soundbar together.I will be purchasing this setup again in the future.I hope the pictures help you in your installation,Good luck

Fit my Bose 900 sound bar nicely!

Great mount! Works great! Fast shipping! Easy to read and follow instructions! Perfect weight! Great quality!

If you have smaller non atmos bars, will work, but for larger bars like JBL 500, 1000, 1300, this mount is to narrow and not deep enough to mount.