🔋 Power Your Passion with Confidence!
This 4.5V 1Amp AC to DC Adapter Power Supply is a versatile and reliable solution for powering various devices. With an input range of 100-240V and a maximum output of 4.5W, it is perfect for set-top boxes, routers, game consoles, and more. The adapter features essential safety mechanisms, including overload and short circuit protection, ensuring your devices are safe while in use. Its 90cm cord length provides ample reach, making it a practical choice for any setup.
| Item Weight | 0.06 Kilograms |
| Unit Count | 1 None |
| Number of Items | 1 |
| Color | black |
| Energy Specifications Met | ma |
| Output Current | 1 Amps |
| Output Voltage | 4.5 Volts |
| Power Source | Corded Electric |
| Current Rating | 1 Amps |
| Frequency Range | 60 hertz |
| Main Power Connector Type | 2 Pin |
| Number of Power Levels | 1 |
| Input Voltage | 120 Volts |
| Mount Type | Wall Mount |
| Amperage | 1 Amps |
| Wattage | 4.5 watts |
| Connector Type Used on Cable | barrel connector |
| Compatible Devices | Headphones, Game Consoles, Speakers |
| Additional Features | Short Circuit Protection |
D**H
Easy to use
It fit perfectly and functions well
K**.
Great for replacing batteries
If you have battery powered lights for cabinets, stairs or any other item that use three batteries, you can use this charger instead (1.5 volts x3 batteries = this 4.5v charger --it can be AAA, AA, C or D batteries as they are all 1.5 volts each). Remove the batteries. Look at charger to see how the tip has a negative and positive part (inner and outer part of the tip shown as a dot inside an arc that indicates which is negative and which is positive). Cut open the rubber base of the tip to expose the two wires and note which wire goes to the inside of tip and which goes to the outer sheath of the tip so you know which wire is negative and which is positive. Now cut off tip and splice open the ends of the two wires. Run the positive wire to the metal tab for the positive battery side in your light or appliance. The positive side is marked with the + sign. Connect the negative wire to the (-) side for the battery. Be sure to connect to the positive and negative tabs that connect to the appliance and not to the interim connections between batteries. You can solder the wires to the metal tabs or tape them or just shove behind or wrap the wires to the metal tabs. The wires only supply low-voltage electricity (same voltage as the batteries you are replacing), so not a risk. Plug in the charger and your light (or whatever it is) never needs batteries.
J**.
Very handy. Used to replace the batteries for my LED lights underneath the monitor stand I built.
This along with the DC receptacle works great. Now I don't have to replace batteries all the time.
P**E
Excellent
Excellent
M**C
Poor Regulation not 4.5V
This power supply was used to replace a 3 battery pack on decorative LEDs. The LEDs were very bright for a short while, then started failing. Checked output voltage -No Load =~5.5 V. 1 Amp Load =~5.0 V.Not 4.5V! Since the LED string was for designed for 3 batteries, the maximum voltage expected would be about 4.8 Volts. Now having to get a new string of LEDs and rewire the decoration.
T**R
x
The end was too Big for my item. Returned
K**
Electric cord
This fit the light for an led perfect. Couldn't be happier
M**W
Used for 24 volt strip lights
Works as expected.
Trustpilot
2 days ago
1 week ago
