Blinds Glass Window Film Privacy Static Cling Tint Anti UV 17.5x78.7in

Installation was a breeze & looks awesome, privacy for my office, check!!

I bought this for an entry door that had a long glass inlay and was covered with a mini blind. Due to constant opening and closing of the door the mini blind was getting damaged and dirty. I decided to remove the mini blind and use this to cover the glass. I was concerned about privacy and the ability for people passing by to see through the door at night when the lights were on inside. It turned out not to be an issue. It lets light in from outside during the day but doesn’t allow any visual peeping from outside at night. And it looks really good.

Product was delivered as described. Instructions were explained well. TIPS & TRICKS 1) USE LOTS OF WATER! The instructions emphasized using lots of water spray on the window. So I sprayed a ton of water on the 1st window I covered. The privacy blind went on so well and easy I thought I had done something wrong. On the 2nd window I didnt spray quite as much water on it because I thought I used an excessive amount of the 1st window and just got to carried away. Well, I had problems with the 2nd windows privacy blind not adhering properly and having way to many bubbles underneath. So I took the blind off sprayed an excessive amount of water onto the 2nd window (to the point water was puddling beneath the window) and the blind went on very nicely. 2) DON'T CUT EXACTLY TO SIZE BEFORE PUTTING BLIND ON WINDOW. When measuring out the blinds, I measured and then cut for both windows leaving at least 3/4 of an inch in excess in width and about 2 inches extra in length. 3) USE A CREDIT CARD TO "ADHERE" THE BLIND AGAINST THE WINDOW BY MOVING OUT ALL THE BUBBLES. 4) USE THE SAME CREDIT CARD (AN EXPIRED ONE) TO THEN PUSH THE BLIND'S EXCESSES SNUGLY INTO THE EDGES OF WHERE THE WINDOW MEETS WINDOW FRAME AND THEN HOLDING THE CREDIT CARD SECURELY AGAINST THE EDGES USE A BOX CUTTER TO CUT THE EXCESS OFF. MAKE SURE YOUR RAZOR BLADE IS SHARP AND YOU WILL GET AN EXCELLENT RESULT.

It is just like described, it blocks the sun and keeps your room cooler.. the only reason why I didn't give it 5 starts is , because it is very hard to installed, however the product itself gets 5 STARTS .. the company I bought this from is very helpful and is there to assist you in anything you may need..... It also looks amazing ....

I bought this for several reasons. #1 We have a lot of heat that comes in our front door, so I was looking for something to help block the heat in the summer, but still allow some light come thru. #2 Our front door is all glass, so anyone can see in. #3 we have a dog that barks at a blade of grass blowing in the wind. This item fit the bill. When looking in it looks like there really are blinds on the door and side panels. When outside, you can not see through at all. When I stand on the inside and someone is on the outside the most you can see if some fuzzy gray blob on the other side and vise versa. It is impossible for my dog to bark at everything on the other side of the door. I highly recommend this product. A few things to note on installation. Wet your door....A LOT. The more water on your glass, the better the film will stick. Once you get it started run your hand or squeegee down with it to keep bubbles out. When cutting the film to the size of your door DO NOT have too much extra to cut away on the sides. Manufacturer stated to have 1cm, I did 1 inch and had a hard time cutting. Do as mfg states and only cut a little away. It will make install so much easier. I plan on buying more and doing other areas.

easy to installed and look great. the only thing I will say is that my product came scratched in the middle. I did not notice until I had cut it and Installed it. It gives privacy and lets light in. I like it that it does not have glue so it is very easy to take off if you like.

If your suburban HOA is anything like mine, there are regulations for what you can put in a window. BUT THIS FILM LOOKS EXACTLY LIKE BLINDS - even my neighbor was incredulous that it was a film. Even better, I put this film on 14 east-facing windows that receive a lot of bright Texas light in the morning, heating up my entire house for the rest of the day. Since I installed the film, bright UV-filtered light still comes through, but THERE IS NO HEAT. My house remains about 10 degrees cooler all day - and I don't have streaks of sun shining through gaps in the blinds into my eyed and onto my computer screen. Everything is light and cheery, but cool and glare free. The film is 100% opaque. I put a bouquet of red-white-and-blue flowers and an American flag in the window 10 inches from the film - it was dim outside and I turned on the interior light. When I went outside to see if I could see anything 10 inches from the film, I could not see anything, not even an outline or a trace of the colors. (You can make out vague outlines of some things less than 10 inches from the film.) EXCELLENT PRODUCT. INGENIOUS PROBLEM SOLVER. Never stop making this film and never change the quality of the materials. THANK YOU, THANK YOU!!! An installation suggestion: Buy some inexpensive cardboard panels for school presentations and make a pattern of the area you want to cover. Double check the cardboard pattern against the window before you cut the film. Put the pattern on the film, make an outline with ball point pen or a fine-tip white board marker, then cut out exactly. DON'T FOLLOW THE INSTRUCTIONS that say cut the film larger than the window and then trim any excess with an exacto knife. Exacto knives, razors and box cutters do not cut through this film well, creating jagged edges. For best results, CUT EXACTLY. Make sure you have a spray bottle of water with you and invest in a squeegee at least 7 inches wide - I bought one from the dollar store. You will drive yourself crazy trying to smooth out a large area with a little credit card.

I had min-blinds on my garage windows for years and they are impossible to keep clean in the garage. I liked the looks of the blinds so bought this film instead. You can't tell the difference! The film is very strong and easy to install. The one mistake I made was on my first window to install. I removed the smaller, sliding window from the frame because I thought it would be easier to install while I laid it flat on the kitchen counter. WRONG! The window needs to remain vertical so the water drips down and out the bottom of the film on the window. Lesson learned. I didn't have a squeegee so I used a wide, plastic blade putty knife and it worked great. Adding soap to the water helped as well. Also make sure you have the right side up. When you are working with the film it is hard to tell. I put a piece of blue painter's tape on the top so I didn't goof up. Highly recommend. Privacy, no more cleaning the blinds!