1157 Front Rear LED Turn Signal Light

Easy install, looks and works great on my 2020 Harley Davidson street bob

These lights are great, very bright, easy to install. No hyper flash on my 2014 switchback. Fit perfectly, compatibility with my application is perfect.

I installed these LED turn signal replacements on my 2022 Street Glide. The included instructions were clear and in reasonably plain English - extra points for that! Important points to remember: 1. When removing the rear turn signal bulbs, carefully note the positions of the lugs on the bulb base so that you can align the connectors the same way. 2. If your rear turn signal bulbs have 2 contacts, use the 2 contact connector bases included with the kit. 3. Keep a careful eye on the foam tape pads in the kit - they WILL fall into the least accessible space on your bike... ask me how I know! 4. When installing the connectors into the bike's turn signal sockets, you will have to press them in quite a ways before being able to turn them. I was able to do it with fingers but you might have to use pliers if your fingers won't fit. Be careful if you do use pliers not to damage the connectors! 5. Pay attention to the placement of the screwdriver slots on the included lenses when you install them so that you can get to them if you need to in the future. I plugged in and tested all 4 lights before completing installation due to feedback here regarding LEDs that didn't function. All 4 sets I received worked perfectly. Then I attached the included foam rings on the front of each LED cluster but did not peel the protective layer from the side of the foam ring away from the LED cluster. That way the foam ring won't stick to the smoked lenses in case I have to remove them in future. Once installed, the LEDs are much brighter than the OEM incandescent turn signals. The front white ring running lights/center yellow turn signals worked perfectly. I did not have to let the hazard lights run to correct hyperflash, the lights operated correctly as installed. I'm happy with them but time will tell if they fail. Still a bargain at this price.

Lights were super easy to install and are very bright. I didn’t have any issue with hyper flashing on a 2019 HD Low Rider. The only thing that I’d change is to make the little aggressive stickers black instead of white. All in all, a good buy and they dress up the bike nicely with the smoked lenses which fit perfectly.

***UPDATE*** customer service reached out to me on their own and issued me a full refund with the evidence provided. As i put in my initial review this product looks and works great, other than the one light that was defective. Looks better than Harley, the price point AND the customer service, this is a win win…..changed my rating to 5 stars bc , what else can you ask for….The nipples on the tip that lock the lights when you turn them were misplaced on one of the front lights. all the others worked great and looked great. i could have returned but really didn’t need the back lights so i just cut one of the back lights and soldered the end on. This is not ideal because i wasted money. i guess you take chances when you buy cheap knockoffs. other than that the lights look great.

Easy install.

Fit just like they should. Good and bright. They do hyper flash. Compatible with my 06 street glide.

I looked over the reviews and missed the ones deep down suggesting these are NOT BRIGHT! This was my experience... #1 the tinted lens is darker than the Harley brand smoke lens. That may be a plus if you want that black out dark look but it cuts light output. I'm no expert buy when I look at other Street Glides like mine with replacement LED's the front can be so bright it looks like a solid bright halo ring, with mine I see each LED, not the look I wanted and not the look I expected when it suggest 400% ??? Also when installing, Be aware, the smoke lens comes with a plastic coating on the outside to prevent scratching but it also has a round protective coating on the inside that MUST be removed before you install, I didn't see this coating and had to remove each light and start over! The light is held in place with a round double sided tape. I had to use that to install this lights. Not sure if all brands mount this way but I wonder? I wonder if I received an older model of something? as many reviews suggest this is a bright light with a few like me don't have bright light. also the rear lights come with the single tip plug and a extra double tip that if like me, my 23 Street Glide needs the double tip the instructions suggest to gently pull the single connector off and plug the double tip in. The single tips was stuck on good and no amount of my finger effort would remove them so I did need to pry with a small flat screwdriver but I was able then to change to the included proper plug for my bike. I guess I'll keep it in until I find a product that I know is bright and then trash these. I just wonder if its bright enough to be safe? I must be seen! I can say the product is okay at best but I was truly expecting much brighter and I have tested these day and night, I want brighter.

I should have read the description. Front of 2013 FatBoy Lo are 1157, but rear is 1156. After receiving when I read the description again, it says, bikes with taillight are usually 1156. But front lights work like a wonder, super-bright, gave a new look to my denim black with smoky covers.

Front housing in my 2018 Sportster 1200 Custom comes with single contact 1156. Rear fit( only red turn signal). I think i will back to Amber (looks better).

It arrived early but wirings are already damaged from the aluminium casing. Only covers I can use hence 1 star.

Vraiment super

They look and work excellent but not fitting 1990 Electra glide classic had to modify the housing after that look the best 😀😀👍👍