Dupli-Color Scratch Fix All-in-1 Exact Match Automotive Touch-Up Paint Marker, Gloss, Universal Black, 0.25 fl. oz.

Pretty good touch up pen. Works well and matches toyota paint very well.

Matches my vehicle paint perfectly!

Paint matched, and the kit is easy to use

OK, perfect match for the very traditional Ford Oxford White color. Doingsometouch ups on a recent surplus auction fleet truck. Color is spot on and the chip repairs are very good. The use of the touch up pen for scratches is a work in progress. After a full multi-day cure, I'll cut that down with some light 400gr on the finger tip and then retouch as needed before blending. It ain't perfect, but it's darn good stuff.

Great color match, easy to use

I got this for a Ford that is a pearlescent white. If you use this color alone, it will NOT match the car's original color if the scratch is anything more than superficial. If you're down to bare metal or black plastic, you have more work to do. I got this to paint a replacement backup sensor that comes unpainted (black plastic). In order to get it to match, I sprayed the sensor with primer, let that dry. Then I sprayed the primer with plain white. Next, I used the product being reviewed here since it adds the metallic/pearlescent finish. Finally, you have to clearcoat it or it will be a matte finish. If you just brush this on anything other than a white finish, it will just be metallic silver. You must also add a gloss to it. The finished product once you do everything properly, is a very good match to the original, but you can't just smear this stuff on by itself. The only part I didn't like is that the consistency is a lot runny. If you're not careful, the surface will not be even. Also, it will take at least two light coats applied gently. The stuff in the pen has a lot of solvent and will remove the white layer below if you're not careful. One quick brushstroke and be done. In the photo, you can see the upper right (old) sensor side was primed and painted with the Duplicolor brush. It is silver, not white. On the face of the sensor, you can see the actual car color. On the lower left sensor side, you can see a sloppy test with primer, white, and Duplicolor (did not gloss the test part).

I’ve included before and after pictures to show this product! it works well with covering my insane black gashes from grazing a wall 😭 it dries quickly <45 minutes and for saving money as a college student, this does the job with covering gnarly marks without the huge cosmetic bill from a shop. happy with my paint pen!

This touch-up paint was an excellent match for my Toyota’s Magnetic Gray (1G3) paint. The all-in-one design is very convenient, with an abrasive tip to prep the chip, a fine-tip pen and brush for applying paint, and a built-in clear coat to finish the repair. It’s ideal for rock chips and small scratches, helping prevent rust while making blemishes much less noticeable. Just be sure to shake it thoroughly for a few minutes before use and apply several light coats for the best results. While no paint pen will be completely invisible on larger damage, this is one of the best DIY touch-up options available for Toyota Magnetic Gray.

It doesn't work, I tried using it and the the thing would not work, the brush part of the touch up paint would not open either, i tried almost anything to open it but the thing would not budge, I'm very upset with my purchase and know never to buy any Dupli-Color products ever again

Touch up on my Camaro

Good match

Good quality. Perfect match to my colour. Works much better than the pencil I originally bought at the dealer.

Proper GM paint for my 2002 Camaro SS. Super!