AUXLIGHT DE3175 DE3021 DE3022 3175 31MM 1.22”Festoon Canbus Error Free LED Interior Light Bulbs 6000K Xenon White, Super Bright 6SMD Chips for Dome Map Door Courtesy License Plate Lights (Pack of 6)

Could not be easier to install. These fit in perfectly and are bright as day. I can't speak to longevity yet but, I am very pleased with initial quality and value

Got these 211-2 (41 mm) bulbs for my 2011 Yukon. Put them in today and they are WAY brighter than the factory incandescents! I had a couple that initially were loose in the fixture and were flickering, but I just had to bend the terminals back together a bit with a needle nose. I'm not sure if the lights were manufactured a little small, or if I just bent the terminals open when removing the old bulb. Time will tell how they hold up.

Fit perfect my W209 with out any errors/malfunctions. They are easy to install and super bright. I love the lights

If for some reason you want your interior lighting on your car or truck to be bright white LEDs, these work fine. No flickering and easy to install or replace. I decided they were a bit much for me to use in anything older than 2010.

I bought these LED cool white lights for the dome light of my car(97 ITR). It is nice and bright cool white color. It has a hint of blue. This light is slightly bigger than my old one, but it still fit. I had a hard time removing the dome light cover inside of my car. I needed that cover removed to put the new one in. There was one trick I have learned online. I used some Gorilla(duct tape can be used). Six inch strip I used. In the middle of that tape, firmly press on the dome light cover. Then, I grabbed the two ends of the tape and pulled down pretty fast. The cover came down with the tape. Before do the step I have mentioned. Make sure it is okay for the dome light inside of your car.

These bulbs worked great for my dome replacement on my 2009 Honda odyssey!! What a difference!! I hope they last!

Fit my 2004 Toyota Vitz (Japanese) Dome & truck light

For a non auto mechanic, the term "festoon" bulb means nothing; I think it means a linear bulb with terminals on either side. However, there are two terminal shapes, conical/pointy, and cylindrical/flat. Disregard what almost any auto bulb matching finds (AutoX and even Amz); take out the old bulb and measure it to the nearest mm. According to Toyota, Amz and big box auto parts, the Tacoma uses a 31mm (1.25") long festoon bulb; IT DOES NOT. At most, it was 27mm long. When the terminal are clipped into clasping C-clips, there is no compressive tension along the length of the bulb, so even a mm or two length different is usually fine. However, when the housing retains the pointy tips of conical terminals with longitudinal compression, even 1 mm over 27mm leads to likely bending of the flat middle portion of the LED bulb. In that case, the only LED festoon bulb with enough solidity to resist bending is the Sylvania with the LEDs completely encased in a cylindrical housing; however, the Sylvania only comes in 31mm length, 3 or 4 mm too long for my 2002 Tacoma. The light works fine, if at no particular added brightness, even when bent in the middle. So, the takeaway is a notice to retailers, and to designers: 1. Please specify if the festoon terminal are pointy or flat; the former is usually subject to strong compressive force, whereas the latter is not since it sits in a cradle. 2. Retailers, if you don't want returns or dissatisfaction, please ensure, by actually measuring with a micrometer, the end to end length of cone-tipped festoon bulbs. 3. Toyota, please look more closely at exact bulb sizes and update all your retailers, including Tacoma dealer parts systems. The DE3022 code seems to encompass lengths from 28mm-32mm, and that is insufficiently precise for the compressive bulb holders on the Tacoma 2002, which struggles even to accept a 27mm long festoon bulb. 4. LED bulb designers, the design of placing a flat array of LEDs between two conical termini is not rigid enough for the compressive forces of the Tacoma's (and likely other makes') spring loaded holders. The points have to fit into small holds in the metal receptable ends, and the act of the compressive spring bends the flat middle part holding the LED's. Do like Sylvania and encase the LEDs within a solid cylindrical housing, arranged centrally. 5. Bulb retailers, please specify a) Lumen emitted, b) Start up delay, c) Wattage consumers, d) Kelvin light quality, e) MTBF in terms of off an on sequences, f) expected lifespan for continuous ON, g) temperature maximum. All in all, for an older model Tacoma, the LED festoon equivalent is under-engineered; it's better to stick with the traditional filament type. With such small bulbs, the energy differential is inconsequential for the consumer, and, on a societal basis, the use of non-degradable plastic and the manufacturing process is overall likely worse than the making, using and disposing of such tiny bulbs.

Worked great in my 2017 Hyundai Santa Fe. The OEM overhead/reading/door entry lights were a yellow color because they were incandescent. These are nice and bright white. I thought they might be polarity sensitive but they are not. I thought I only needed 1 bulb to replace a burnt out bulb - but I did replace all 6 in the vehicle because they are so nice and I figured if 1 burned out, the rest weren't far behind. I'd definitely recommend these. Hopefully I'll never have to replace these again.

Good and bright replacement.

The bulbs were packaged well. No visible defects on the LEDs. Plug and play with easy on my vehicles.

Work well. Wish they were a little brighter tho.

I recently purchased the LED Interior Light Bulbs for my 2007 Honda CRV, and I am extremely satisfied with my purchase. I wanted to replace the old, yellow and low lights in the interior of my car, and these bulbs have made a huge difference in the brightness and overall look of my car's interior. The installation process was very easy, and I only needed a screwdriver to remove the light cap and replace the old bulbs with the new LED ones. It only took me about 5 minutes to complete the installation, which was very convenient. The package includes 6 lights, so I have 2 extra as spares, which is a nice bonus. Now, the difference in the interior of my car with these new lights is like night and day. The LED bulbs are significantly brighter and give a more modern look to my car's interior. They also consume less power than the old bulbs, which is a great advantage. Overall, I am very happy with my purchase of the LED Interior Light Bulbs. They are a great upgrade for any car owner looking to improve the look and functionality of their car's interior lights. If you're considering upgrading your car's interior lights, I highly recommend these bulbs.