OPHIR Adjustable Airbrush Spray Booth with Dual Fans, 3 LEDs & 5.6ft Hose | Airbrush Booth With Adjustable Led Lights, Fans, Extendable Exhaust Hose, 360° Turntable For Models, Crafts, Cake Painting

Set this up today and very impressed. My biggest concern when ordering this was the adjustable controls because the some of pics on the order page looked like rocker switches. No worries - the pic above are the rotary knobs on the unit I received. Assembles very easily and appears to be quality components. NOISE - 60-61db directly in front of the machine at full power (this was the loudest area - sides and rear were 54db) 55db at half power. LED's are nice and bright - I found 3/4 setting was comfortable light while I was spraying. Has good evacuation around the spray opening. Tested with a smoking cigarette and it pulled with no issues from about 3-4 inches OUTSIDE the spray perimeter. Sprayed lacquer for about an hour and no issues with how well it kept the fume level low in and around the unit. To be fair - I unscrewed the vent on top of the machine and applied a bead of silicone around the perimeter and also put silicone beads around the tube joints at the window outlet vent and the rubber connector that attaches to the machine. Not sure if this is needed but I did it during initial assembly just to rule out any leakage. It breaks down easily and all the components fit inside. I store it under my hobby bench with the vent tube alongside. As a hobbyist, I probably spray 6-8 hours a week. I'll do an update in 6 mos regarding the longevity.

This has been amazing. I am so happy with my purchase and it works better than expected. I chose this over the master airbrush one, since they are exactly the same, but this color matches my primer and stuff will show up less vs black. My fumes are cut down completely, I don’t need to wear a mask anymore, and I can paint large models in it too. The fan and lights are all fully adjustable and setup was done in 5 minutes. I use a glowforge airfilter so I can vent it indoors. I suggest using polypropylene sheets in front of the booth filters each session to prolong their life.

This is an awesome product. It is super easy to assemble and the LED lights are super bright. It has great air flow and is adjustable. Much better than my old paint booth. I have painted 3 cars so far and it did a wonderful job.

A good starter option for the price. This was my first foray into a spray booth for plastic model building. Fans remove a good amount of residual spray but a respirator is required for heavier solvent paints. There is no way I'd use this indoors. I'm using it in a garage. Unit is not heavy. Size is a bit restricting. A 1:48 scale B-25 barely fits in the workspace as the wings constantly hit the rear filter when rotating the piece on the included turntable. Moving the piece further forward limits the removal of vapors. The LED lights are very good, not sure how much the variable lighting options help. I always have them on full-blast. Disassembly for storage is handy but it still requires a fair amount of space to store it. The included vent hose is very stiff and re-collapsing it for storage is a pain. The 6' (I think) length was too short for my application, so I used a longer piece of dryer vent hose (much more flexible) and am using a charcoal filter (used in cannabis growing operations) at the outlet. I'm not sure how much this affects the fan output, but I didn't have another option to preserve heat in the garage and vent to the outdoors. Any residual smells are coming from the front of the spray booth and not the discharge. I'm not at all disappointed by the performance of the unit or its configuration. All of that was taken into account before the purchase. It's much better than nothing and at the price point, a "good" DIY unit would have been close to the same cost, require time for assembly, and I'm not sure performance would be any better.

I've had this booth for a couple of months now and have used it several times. I have used enamels as well as acrylics, air brushes and rattle cans. The double fans manage to pull out the fumes with no problem. I love being able vary the fan speeds. the fans are quite noisy at full speed. My hobby room is downstairs below our bedroom, but you can't hear the fans in the bedroom, so that's a win. The LEDs are bright and adjustable also. No problems seeing the model while I paint. It is a large unit and takes up quite a bit of real estate. I have it on an old printer stand which works great. I'd buy this booth again if I need one.

Arrived very quickly. Easily set up in a few minutes. The power connections seem stiff and sturdy. The whole construction seems well planned and executed. The fan isn’t silent but no louder than my airbrush compressor. Allows plenty of well lit work space. Allows me to paint indoors without worry of fumes bothering anyone. The hose for airflow can redirect exhausted fumes out a door or window, or you can use it without the hose.

Very happy. There were other cheaper units but I'm so glad I bought this one. Assembly was very easy. Quality is excellent! Hardest thing was figuring out how to seal the duct opening in the window, but that was easily done with some pipe insulation foam from Home Depot. The variable speed fan and lights are great! Extremely pleased and well worth the extra money!

Edit: After my initial trial run where the booth performed poorly, I did a bit more research and found this little footnote in the product description saying "Note: Not intented for use with Hazardous Materials, Flammable or Explosive Paints or Materials." What does that mean? That means that this booth should NOT be used with solvent based paints like many people in the reviews appear to have been doing. Extremely disingenuous to place this safety disclaimer in such a tiny footnote. If you are using water-based acrylic paint you are good to go but for any lacquers/enamels, you are better off investing in a proper paint booth (eg. Pace or Robot Kai) that is meant to handle them. The adjustable fan and light are super nice perks. Especially if you got neighbors, the fan doesn't make a lot of noise till its about 75%. Unfortunately, as I came to realize, it seems like the booth just doesn't pull enough air to filter fumes if you run it at 75%. I need to test how it performs at 100% but it's about ~75dB compared to ~55dB at 50% then so it's quite a bit louder. The booth itself is a bit shallow and short and I find that it doesn't do a great job of catching the overspray. Will try playing with spray angle to see if that helps but on first trial I could see the overspray curling up and out of the booth. The actual exhaust hose feels a bit jank, especially the nozzle tip which doesn't really secure on and slips off constantly. Lastly, the electrical components seem kinda cheap. The lights and fans will briefly turn on when plugged in (even if they're off) and the power brick LED will remain illuminated for a really long time after its unplugged/powered off. Doesn't really affect the performance but it is unsettling especially when working with flammable paints.

This was so easy to assemble. Love the twin fans. The LED lights are in a better position than other makes. Rheostats for fans and lights are a great option for control. Sound levels are acceptable. Portability is convenient. Highly recommend this unit.

Reçu dans les temps, tout est là. Facile à installer et utiliser. Je l'ai seulement essayé une fois depuis l'installation et je suis très satisfait. Bonne puissance des ventilateurs et éclairage puissant, et belle largeur/hauteur de ce modèle comparativement à d'autres plus petits. Pour le modelisme de voitures ça va être parfait. Reste à voir sur le long terme...mais je suis très satisfait, je recommande.

I got this to replace a smaller one I had, and the major feature I love about this one is the vent goes on the top, which works way better for my painting table at my new place. Provides a lot of suction and the light is really good, the only things I will add is the fans are LOUD, you're not gonna be able to watch TV or listen to music easily while this is running without headphones. And the suction is good, but the filter is aggressive, so you're going to end up with a bit of fumes ending up in the air regardless, so I'd recommend wearing a mask regardless

I like this machine. I have used it a few times now with both my airbrush and rattle cans. With acrylic and enamel paints. The duel fans do a good job venting the excess spray and odors outside. I could never use a rattle can indoors before because of the smell, this really helps reduce the odor. The wife hasn’t complained yet. The led lights are great, they’re bright and really illuminate whatever you’re painting. Is this machine perfect? No. The build quality is good, not great, and I wouldn’t mind the fans being a tad stronger , but if your hobby is occasionally painting some small items, this machine is great.

so he said with a smile.