ERYONE PETG Filament 1,75 mm, 3D Printer Filament PETG, +/- 0,03 mm, 1 kg/Spool,Transparent

I am genuinely surprised by how good this ERYONE PETG Carbon Fiber filament is. Once properly dialled in, the print quality is exceptional. Layer lines are almost invisible, giving parts a very clean, machined look rather than something that appears obviously 3D printed. The surface finish is smooth and matte with a proper carbon fiber texture, and the parts feel extremely solid and rigid. This filament prints noticeably slower than PLA, roughly around three times slower in my case, but the trade-off is absolutely worth it. The strength, dimensional accuracy, and overall finish you get in return are on another level. It’s a filament that clearly rewards patience and careful tuning rather than rushing through prints. I’ve printed a variety of functional parts with this filament and every one came out beautifully. This includes a desiccant dryer box shaped like a filament spool to sit inside a Sunlu S4 dryer, with tight tolerances, threaded screw holes, and small vent slots, all of which printed perfectly. I also printed an AMS buffer bracket which came out extremely solid and rigid, as well as a carbon fiber Benchy. In every case, the filament behaved consistently and predictably. In terms of settings, I had excellent results using a nozzle temperature around 245–250 °C, a bed temperature of around 80 °C on a textured PEI plate, and significantly slower speeds than PLA, especially on outer walls. Cooling was kept moderate, and as expected with carbon fiber filaments, a hardened nozzle is recommended. Overall, this is a genuinely high-quality PETG-CF filament that delivers professional-looking results with outstanding strength and finish. If you’re looking for a carbon fiber filament that prints reliably and produces parts that look and feel premium, this one is very easy to recommend.

Bought the Black CF PETG. Prints incredibly well with my standard PETG profile and a hardened steel nozzle, the CF hides layer lines and gives prints a very nice semi matte finish. Packed with desiccant in a resealable vacuum packed bag, and arrived fairly dry, though it being PETG means it will need storing correctly and potentially drying in the future. No complaints.

This budget-friendly PETG filament comes well-packaged in an eco-friendly cardboard spool with neat winding to prevent tangles, vacuum packed and inside a cardboard box. However, it arrives extremely damp, causing severe stringing issues if used straight out of the box. After proper drying (6 hours at 60°C in an eSUN Filament Dryer with silica gel), it performs admirably. Despite the initial moisture problem, the filament offers good heat resistance, making it suitable for higher-temperature applications like printer chamber components. Whilst this is not a substitute for an advanced material, such as ABS, this is a good middle-ground for prints that need to be more robust than PLA. The filament is very durable and resistant to UV, making it a perfect solution for outdoor prints or functional parts which need to deform slightly rather than snap. This is a decent PETG filament with a reasonable glass transition temperature that performs well after thorough drying. The extreme initial moisture content is disappointing but somewhat expected at this price point. Once properly dried, it's a solid choice for applications that need more durability than PLA.

[black petg-cf] It came well wound on a good quality cardboard spool. The finish on it is fairly flat and on my Anycubic S1 it prints really quite nicely. So, the benefit of PETG with a little extra strength from the Carbon Fibre. The print settings are on the reel and I used them.

ERYONE PETG-CF. Unbelievable print quality. Great surface finish (walls and top surfaces), good layer adhesion, very low warping, great overhangs! Highly recommend. Printed on H2D using Bambu Labs stock profile 0.12mm layer height (minor scarf setting tweaks).

Printed well straight out of the box. Printed a file I have sliced for another of their petg filaments and came out great. Translucently with the blue is nice. Going to get some nice lamps etc from it.

I've used Eryone black PETG and had no problems printing with it. Then I purchased the white PETG and it's useless. I've had around thirty failed prints so far due to warping, crap bed adhesion and stringing galore. I spent a week recalibrating my firmware and printer setup to fine tune retraction and PID settings to get to 70% of a successful print but no further before the part detaches from the bed. I generally prefer PETG as an easier to print alternative to ABS or Nylon, but this PETG is turning out harder to print with than either. I think the issues might have something to do with the waxy consistency that reminds me of PTFE as it certainly has the same adhesion characteristics. I can't recommend this filament any less and would give it a zero star rating if that was possible. UPDATE - I struggled with this filament for weeks, adjusting printer and slicer to try and get a decent print. On my latest best setup I removed this filament and dropped in role of Black Flashforge brand PETG and it printed the same model perfectly which tells me it's definitely this filament at fault. AVOID like the plague! UPDATE 2 - Like an idiot I bought Glitter Black because it was on offer. The spool was broken and came in an unsealed plastic bag in a paper bag and not in the original box. It looked like someone had been playing football with it and was definitively a used item. I stuck it in my dehumidifier for a day and glued the reel back together and tried printing with it. It wouldn't stick to my PEI bed no matter what settings I used. Eventually the reel jammed due to being tangled beyond the ability to re-spool it without fully unwinding the entire spool, so I requested a refund. So it looks like the issues with this filament are not limited to a single colour, but effect the entire range. Eryone have lost a customer!

If you are a 3D printing enthusiast looking for a high-quality filament, then ERYONE PETG Black Filament is an excellent choice. I have been using this filament for a few weeks now, and I am impressed with its performance. Here is a detailed review of this amazing filament: Pros: - High-Quality: ERYONE PETG Black Filament is a high-quality filament that produces strong and durable prints. The filament is easy to use, and the prints come out with excellent surface quality and no visible layer lines. - Wide Compatibility: This filament is compatible with a wide range of 3D printers, including those with direct-drive and Bowden extruders. It also works well with different nozzle sizes, from 0.2mm to 1.2mm, making it a versatile filament for different printing needs. - Odorless: Unlike other filaments that emit strong and unpleasant odors during printing, ERYONE PETG Black Filament is odorless. This makes it a great filament to use in indoor environments or when printing in enclosed spaces. - Easy to Print: This filament is easy to print with and does not require a heated bed. It adheres well to a wide range of build surfaces, including glass, PEI, and BuildTak. - Great Value: ERYONE PETG Black Filament is affordable, and the 1kg spool provides a great value for the price. Cons: - Prone to stringing: The filament is prone to stringing, which means that small strands of filament may be left behind when the print head moves between different parts of the print. However, this can be easily fixed with retraction settings in the slicer software. - Requires precise temperature control: This filament requires precise temperature control to avoid issues such as under-extrusion or over-extrusion. It is important to fine-tune the printing settings to achieve optimal results. In conclusion, ERYONE PETG Black Filament is a high-quality filament that produces strong and durable prints with excellent surface quality. Its wide compatibility, odorless nature, and easy-to-print characteristics make it a great filament to use for a wide range of 3D printing needs. Although it may be prone to stringing and requires precise temperature control, these issues can be easily addressed with some adjustments in the slicer software. Overall, ERYONE PETG Black Filament is an excellent value for its price, and I highly recommend it to anyone in need of a reliable filament for their 3D printing projects.

Szpula jest zle owinięta. Drut jest zaplątany, nie możliwe tym drukować.

I picked up the ERYONE Carbon Fiber PETG Filament to test out for stronger, more durable prints, and it has been performing really well. The filament itself looks and feels high quality, with a nice, even texture. It feeds smoothly through my printer with no tangles or inconsistencies. The added carbon fiber gives prints a great matte finish and extra rigidity while still maintaining PETG’s impact resistance. Layer adhesion is strong, and I haven’t had any issues with warping. That said, printing with carbon fiber PETG does take some fine-tuning. A hardened steel or ruby nozzle is a must since the carbon fiber is abrasive. I also had to adjust my retraction and cooling settings a bit to minimize stringing, but once dialed in, the results were clean and precise. Overall, if you’re looking for a strong, rigid PETG with a sleek finish, this is a great choice. Definitely worth it for functional prints where durability matters.

Après plusieurs bobines utilisées de PLA de cette marque qui ne m'ont jamais déçues, j'ai voulu essayer du filament PETG. Packaging qualitatif dans un carton écologique, la bobine se trouve dans un sachet sous vide pour être préservée de l'humidité, graduation très appréciée pour connaître les mètres et grammes restants. J'ai imprimé des emporte-pièces sur le thème de Noël, superbe qualité d impression en respectant les consignes d eryone, température de la buse à 240 degrés et plateau à 50(sur plaque cryogrip), zéro défaut constaté pas de décollement des pièces, ni de cheveux d anges pourtant fréquents sur ce type de filament. Je recommande et valide à 100%

Ottimo materiale,prima volta che stampo Petg e non ho avuto nessun problema usando stampante Artillery Genius, 230° nozzle e 70° bed Nella foto skull low poly in modalità vase,il Petg conferisce la robustezza necessaria anche per stampe dalle pareti sottili, cosa che non si ottiene con semplice Pla,nessun problema di adesione, insomma materiale promosso a pieni voti👍

In eerste instantie problemen met hechting en stringing met de aangegeven temperaturen van de fabrikant. In prusaslicer filament profiel van Prusament PETG opgegeven en geen enkel probleem meer gehad. Dus printen met nozzle temp 250 en bed 90. Te opgegeven temperaturen op de spool zijn dus te laag.