


Desertcart purchases this item on your behalf and handles shipping, customs, and support to Senegal.
๐ค Grip like a pro, shoot with confidence!
The Pachmayr Gripper Grip for Ruger Special Police combines ergonomic finger grooves, precision checkering, and a durable covered backstrap in a sleek black rubber design. Engineered for enhanced control and comfort, this medium-sized grip reduces hand fatigue and improves shooting accuracy, making it a must-have upgrade for serious firearm enthusiasts.
| Asin | B000VUFPPE |
| Best Sellers Rank | #350,811 in Sports & Outdoors (See Top 100 in Sports & Outdoors) #1,111 in Hunting & Shooting Gun Grips |
| Brand Name | Lyman |
| Color | Black |
| Customer Reviews | 4.3 4.3 out of 5 stars (262) 4.3 out of 5 stars |
| Global Trade Identification Number | 00034337031758 |
| Grip Size | Medium |
| Grip Type | Textured |
| Included Components | grip |
| Item Type Name | grip |
| Item Weight | 5.92 ounces |
| Manufacturer | Lyman Products |
| Manufacturer Part Number | 3175 |
| Material Type | Rubber |
| Model Number | PK3175 |
| Unit Count | 1 Count |
| Upc | 034337031758 |
User
Yes-It fits the older 150 sserial number Security Six!
YES! This grip will fit the older model of the Ruger Security Six with 150-xxx serial number. I recently acquired an older 150 series Security Six with the original walnut grips. The ergonomics of the grip were pretty bad, especially using .357 ammunition. The grip was simply too narrow. I started the search for something after-market but since this frame design was phased out in 1974, it was almost impossible. This frame has a 'square butt' design and the follow on model (serial number 151-xxx) had a rounded butt. There are some older grips by Herett and a few others available if you search ebay etc. but they were $75+ and were wood. I talked to a half dozen people who do custom grips and there too I was looking at the same cost. Even then, of the 6, only 3 would do the job and all of the grips were wood, bone etc. and no rubber. I personally wanted a larger rubber grip.I gave the Pachs a shot after reading multiple forums from folks who had done the same thing. Here's how it worked for me. Remove the screw and original grips. At the base of the metal frame butt, there is a metal roll pin with a smaller roll pin inserted inside of that. The smaller pin just slides out. The larger roll pin then needs to be tapped out. I put some WD-40 and Rem oil on the pin and let it sit for 30 minutes to loosen it a bit. Then I tapped the roll pin out with a small hammer. Once the pin was flush with the frame, I used a flat tipped tap (you can use a nail and flatten the tip a bit against a vice) to 'lightly' tap the pin the rest of the way out by catching the inside lip of the pin inside the hole of the frame. While I was doing all of this, I had slipped the grip inside of a heating pad on high, just in case I needed a little flexibility during the fit. I put the grip on and seated it. It is a snug fit, which is good, then I put the screw in. Charles Gudruth is right in his review. I had virtually no gap at the front (less than 1/32) and a bit of excess (3/8 ") on the frame rise just behind the hammer where the web of your thumb would be. This can be cut flush with an exacto knife left as is. I left it as is as I liked the additional recoil support.The grip itself is first rate. Rubber is not too hard or soft and the checkering is comfortable and not overly aggressive. I have medium hands (6', 172lbs) and it feels perfect to me. The difference when firing was very noticeable and gave me much better control for follow on shots using both .38 and .357 ammunition. I would highly recommend the product. Another great product from an equally great manufacturer. Product arrived in 2 days with Prime - thanks Amazon.
User
Fits perfectly & feels much better than the stock walnut grips
Arrived today and took just seconds to put on my Service Six. (Important: You have to remove the 5/32" by 3/4" roll pin on the bottom of the grip frame if you are replacing the stock grips, something that isn't mentioned on the package. The pin is there to give the stock two-piece grips two points of attachment. That is not necessary with a one-piece grip like the Pachmayr. ) I spread the seam at the front of the grip open about 1/8" and it slid easily onto the frame -- literally one second to install and another few seconds to tighten the screw.The result was a perfect fit all around -- I do not have any of the gaps around the edges that other reviewers have mentioned. The seam (which is on the front and bottom) is completely closed with no unevenness or protrusions.The grip feels far better than the stock grip. It's noticeably larger front to back, side to side, and top to bottom, and fits my average-sized hand better. The "feel" is really nice -- it's "grippy" without feeling rubbery. I also like that it covers the backstrap and gives some measure of padding to the web between thumb and forefinger as well as putting some rubber between the trigger guard and my middle finger. I expect my hand tol be much more secure and less likely to shift when shooting higher-recoil .357 loads. I will say that this is a utilitarian grip, not a showpiece. But it looks OK and, more importantly, it does the job a good grip should do. I highly recommend it.
User
Typical Pachmayr excellence.
Yes, you probably will have to remove or grind down the roll pin found in the bottom frame area of the guns hand grip section. It is too wide to allow the grip to fully close properly and will result in a poor fit and appearance.Once the roll pin issue is addressed, the grip fits perfectly.Not that many Security Six pistols floating around out there, but this grip makes them actually useable, the stock wooden grips are totally worthless...
User
Quality but doesn't fit
Quality product, just doesn't fit correctly. Will be returning but have no issues buying other products from this vendor.
User
Comfort
I have used pachwayr grips on my revolvers for a long time. Fits nice and comfortable.
User
Poor fit
Having owned several Pachmayr Grips for different pistols, I have never had a problem with fit. Decided to replace the Walnut grips for my Ruger Security six with Pachmayr grips. No matter how much I tried and tried to screw the screw down as far as it would go, there still remained a small gap on the butt end and at the seam lower end. The grips are still usable and do feel good in my hand, but I will find out next time I crank of some Magnum rounds if the grips will hold up..Going to keep my Walnut grips just in case. The only way for Pachmayr to resolve this problem would be another tie screw lower down on the grips. Oh and by the way my serial number start is higher than 151, so that is not the problem. I looked at the grips again an hour later and decided, that the gap is just too big and would let grime and dirt in. Sent it back to Amazon for refund.
User
Pachmayr Quality Isn't What It Used to Be
Easy to install, and better than the factory grips for control and comfort. Prominent mold marks on the seams. One of the Pachmayr signature metal medallions wasn't secured, so I had to super glue it in place.After installation, there's a gap in front of the grip where it opens to go around the frame of the pistol. I've had other grips from them over the years, and I've got to say I'm not overly impressed with this one. The perfect may be the enemy of good enough, but come on, guys-you've been doing this for years, and you're not on your game here. You can do better than this.I'll keep this as it's good enough, and not worth the hassle of returning for one that may not fit any better.
User
Pachmayr Gripps
I put them on my Ruger Security six 357. Made holding that bad boy a lot easier.
Trustpilot
1 day ago
5 days ago