yueton Aquarium Water Filter Pipe Air Tube Hose Stainless Steel Cleaning Brush Flexible Double Ended Hose Brush(61inch)

I've had a 150g tank running for a little over a year. I could observe the visible portions of my intake and output lines getting more and more clogged, and was afraid to know how ugly the rest of the lines were. I also noticed the volume of water being cycled was quickly diminishing almost weekly. Came to Amazon in search of a fix and found this gem. The reviews seemed to be very positive, almost to the point of triggering my standard skepticism. Could something this inexpensive really clean these lines out with a single run? Fast-forward a couple weeks later and I bought a set, took down my intake/outflow lines, and put this thing to the test. Was concerned this hose brush would be too short to pull through the length of my lines, as they're rather lengthy, running from the cabinet beneath my tank, out the back, and over to the far corner. My tank is an XH (extra-tall) tank, so it requires really long lines to get up and down the glass. This thing was just long enough and seemingly perfect-sized to pass easily through my lines. The only slight pain point was the back-to-back 90-degree turns in the plastic intake/outflow pieces going over the edge of the aquarium, though it only took a few moments to find a way to maneuver the brush through. Was in absolute amazement at the amount of gunk this thing pulled out. The visible portions of my lines looked brand new and after re-assembling my lines, the system was pushing some serious water again. Equally important was how quickly/easily these brushes cleaned up. Thought for sure it was going to be a real mess getting the gunk out of the bristles, but everything rinsed right out in seconds. Honestly looked like they'd never been used. One of the least expensive purchases I've made for my tank to-date, but far and away one of the most valuable. Could not be more satisfied with this purchase. Highly recommend to any serious fish-head!

Great for cleaning out canister aquarium filter tubing

The brush is long and will have no trouble getting through the tubing I want to clean, but the bristles are rather soft and not very large, so I am not sure if it will get the gunk out. Haven't used it on aquarium tubing yet, will update after. ---update I used this to clean aquarium drain hose, both corrugated and smooth. It does a good job and it's nice and long. It takes some effort and repetition to get all the gunk out, but with this and a garden hose and a cotton rag I got the hoses clean enough to use again. Very pleased with this purchase.

Worked to clear AC condensation drain line.

This tool was a game changer for me in cleaning algae out of the tubing of my turtle tank filter. (My previous method was to twist pipe cleaners end-to-end, run it through the tubing, and hope it didn't come apart before coming out the other end.) The tool has a different size brush on each end, so it fits the flexible 5/8" tubing as well as smaller hard plastic inflow and outflow tubes. The shaft of the tool is made of tightly coiled wire that doesn't tarnish or rust. It's flexible enough to go through the curves of soft plastic tubing and firm enough to push through the hard plastic ones as well. It makes cleaning all the parts of my turtle filter much easier and faster than my previous "stone age" method.

I got this to clean out some tubes for my red ear's tank. I get they can't be very sturdy because they need to be able to bend and move through stuff but I literally have to fight with it just to get it through a tube. The bristles do clean so that's a positive.

when i first got a canister filter i couldn't figure out how to clean the tubes , after i purchased this it made my life so easy.... i love it its a multi purpose tool

This cleaning brush is the best thing in the world. I have always stressed with cleaning the hoses for my turtle tank. Turtles are messy and accumulate A LOT of filth, especially if you feed them in the tank like I have been doing. I could never get the hoses clean. I had to hook them up to the filter, prime it, and circulate water from them into a bucket just hoping it would push most of the scum out. It didn’t work that well and the second I’d hook the filter up to the tank, all of the debris would come out into the clean water. This thing saved my life. I pushed it through (which was very easy) and every bit of scum came out. The hoses looked brand new! My only complaint is it wasn’t quite long enough, but it honestly didn’t matter. Once the scum was loose, I took the brush out, ran water through and all of the yuck came right out through the other side. This brush took 30 minutes off of cleaning time! I may order a few just to have them. If you have a turtle, this brush is a MUST!

Pour nettoyer l'endroit ou mon torchon ne passe pas. EX. entrée et sorti de l'eau du filtreur. beaucoup trop étroit et avec en pus une courbe mais avec cette brosse plus de problème. Magnifique..

Exactly what I needed for cleaning out gross filter pipes. Works great

Works great, use it to clean out all parts of my Aquaclear hangon and Eheim cannister filter. This thing is long enough to get through all the external hoses.

This is a good quality item which does a great job of cleaning aquarium tubing. Very handy.

Thank you