All Sizes & Colors 5-100 FT Polyolefin 2:1 Heat Shrink Tubing LOT

I hardly ever right a review but this made me mad.This 100ft roll was 3ft short on the noise, I measured twice. I can understand some tolerance within the 100ft, maybe two or three inches short but 3ft? Looks like they cut some off. I needed two 50ft lengths for LED lights and now I only can use 50ft and have to throw away the remaining 47ft. This really sucks and I'm afraid to buy anything from this seller to finish the job because I dont know what I will get. I dont think I should have to buy 100ft to insure I get 50ft that I need.Amazon needs to remove this seller if they continually short buyers to make an extra dollar.

I MAKE LAMPS FROM DISCARDED BOTTLES AND JARS. I HAVE TO THREAD THE LIGHT WIRE THRU THE HOLE I DRILLED IN THE BOTTLE TO COME OUT THE NECK. NEITHER THE PLUG NOR LIGHT SOCKET WILL FIT THROUGH THE HOLE. SO I HAVE TO CUT THE WIRES APART AND THEN REJOIN THE WIRES. THEN I TWIST THE WIRES TOGETHER, PUT ON THE SHRINK TUBE WHICH IS CUT FROM THE 100' SPOOL THEN SOLDER ALL WIRES TOGETHER PULL THE SHRINK TUBE INTO PLACE OVER THE UNION. I USE A HEAT GUN TO SHRINK THE TUBE.THIS TUBING IS A 2/1 AND WORKS PERFECTLY AS I HAVE TWO WIRES ON ONE SIDE AND ONE WIRE ON THE ON THE SIDE OF THE UNION. THE LAMP, ONCE FINISHED IS SAFE FROM CAUSING AN ELECTRICAL SHOCK OR BECOME A FIRE HAZARD, SHOULD THE BOTTLE BE DROPPED AND BROKEN.NOTE: NOTICE THE ALLIGATOR CLIPS ON MY SOLDER STATION. THE JAWS ARE SERRATED SO I USED SHRINK TUBE TO COVER THE LOWER AND UPPER JAWS AND WA LA PROBLEM SOLVED.I HAVE RECENTLY PURCHASED MY SECOND REEL OF 100' 2/1 SHRINK TUBE AND I RECOMMEND THIS PRODUCT COMPLETELY

This is exactly what I needed. Having to go through and re-identify the white wire of about 150 twisted shielded pair cables so they meet a black and red color code I started looking for red shrink tubing. My options seemed really limited since either I couldn’t find it small enough to shrink down on an 18AWG wire, or it had the adhesive inside and the thickness would have made it too large for the labels that were going to be placed on the wire. I thought I’d try this since the price was really reasonable and with the 100’ roll I could cut off the various lengths I needed without having to waste a lot like I would have with the other products I’d seen available only in 3’ and 6’ lengths. This stuff shrinks down and holds onto the wire just fine. It also doesn’t add a lot of girth so I’m able to reuse the wire tags which is going to save me a LOT of time.

Fast shipping, good product, exactly what I needed, excellent price.I build a lot of custom cables and use heat shrink tubing for color coding them. This size is perfect for smaller install cables.I'll be back for more.

Works well for automotive wiring repair. I had a squrrel nest in one of my cars and ate 9 wires. I have been soldering and heat shrink tubing for years and this stuff worked great! Happy I ordered 200feet of it!

I wanted a way to add protection and gription to my drum mallets. This product worked very well and I like the sheen of the clear covering. I used the 3/4 inch tubing on both 1/2" mallets (with rubber tips) and also the thicker yarn tipped mallets. On some of those, the diameter of the stick was smaller than 1/2" and the tubing shrunk down nicely as well. I used a heat gun and it took about a minute to shrink the tubing on the mallets.

Worked great, used it on my patio table umbrellas on the poles. Got tired of them getting scratched up at the table hole and the stand. Purchased the 2 inch all black no writing on it and it blends in with the satin black poles.

Have a couple Motorola EP 450 radios.Antenna's rubber-like material cracks over time, becoming useless.With this material, saved several $ in new antennas. Old ones will give extra years of performance.