Good News150 Pieces Glue Extender Precision Applicator Precision Micro CA Glue Tips for Bottles with Nozzle for Hobby, Crafting, Lab Dispensing

Didn't know if medium viscosity cyanoacrylate (CA) would flow through the microtips, but everything worked perfectly (I was using a 1 oz bottle of medium viscosity Great Planes CA).It just slips over the regular tip of the CA bottle and gives you the ability to be much more precise with the application of CA. Benefits:- Reduces consumption of CA by significantly reduces over-application- Quicker set-up time and better adhesion (because there is no pooling of CA)- Slightly less CA vapors (because you are dispensing less)- Eliminates the need to constantly be poking pins in the top of the bottle's applicator due to pluggingA single tip lasts quite a long time because if it gets' a little accumulation you just trim a couple mm off the tip and you're good to go. Can't imagine how long 150 tips will last, but I doubt I will ever need to buy more.Frankly having used these and seeing how cheap they are the CA manufacturers should be including a couple with every bottle they sell. If you're frustrated with sloppy CA application go ahead an order these. They work well and do exactly what they are promised to do.

There isn't much to dislike, a lot to like, and I use them for what they are designed, glue tips.I use Gorilla Glue XL. It's a quick adhesion super glue that can get messy in small places. I bought these so I could control the amount of glue I've been putting on basswood to glue it to things. I didn't know from the photo they were as detailed as they were. You can use the entire tip and spread a thin line of glue across a narrow surface. You can also cut off that excess tip distance, leave about a half inch of tip, and dot your glue across an area with no mess. As for no clog, they don't clog, but if you don't do some maintenance the excess glue can dry at the tip. No big deal, use a straight pin, nip the tip, or just use another one. You get 150 in a package for less than 10 bucks total regardless of where you live. Free shipping with Prime helps too.The clear, see through, design lets you see the glue leave the bottle and work its way to the tip, no surprises.The part that goes over the glue bottle tip is seemingly made for certain sized glue bottles, but with some work and a bit of scraping, I managed to push the hole over the tip of the Gorilla bottle and it stayed on quite nicely. The glue retreats back in side the bottle like it's supposed to when you stop squeezing, and if you take it easy, you can get a nice even spread. If you act like you are trying to crush a rock in your hand, you will get the puddle of glue you deserve.150 tips for less than 10 bucks. That work. I'm sold.

Makes it easier to accurately place glue. I did have to stretch the base to fit over my ca glue

Finally a solution to my Thin CA woes. These extenders have often caught my eye while I have been purchasing extra tips for my Bob Smith Industries CA glue (I go through a lot of the stuff and a lot of tips). I finally purchased some to experiment with and I will never use the tips without the extenders again.It helps get glue where you actually want it.More importantly it allows more control over the amount of glue.It helps prevent inevitable spilling accidents.It prolongs the life of the tip.If the glue dries at the tip you can simply snip the very tip off and be back in business.For such a low price you will save money in the long run.

These work great for direct low viscosity CA

Super accurate . If tip dries clip off tiny bit of tip and it will flow again . Helps save allot of the glue since it slows down large flow which is a great Plus.

Works great

A scale modelers friend. Allows pinpoint placement of glue where needed. If I were to change anything I'd make the sleeve where you put it on the glue container smaller so there's less waste.