Seven Sparta 4 PCS Grill Led Lights with Fuse Adaptor Compatible with 2016-2023 Toyota Tacoma TRD Pro OEM Front Grille (Amber Light with Amber Shell)

Truck is a 2021 Toyota Tacoma TRD 4x4 Off Road. With factory grille for this year/model. Awesome product! I am amazed at the quality for the price honestly. I had purchased a different style light and that was a mistake. The square looking housing lights are horrible. I sent those back and got these. So glad I did! I can’t say enough how much better this design is over the others! The housing that clips into the grill fits perfect and snapped in extremely easy. The diamond shape of the outer housing is brilliant as it makes the install look super clean by filling in the gap around the light itself. The led lights themselves are clean looking and very bright. The smoked housing with amber leds has an amazing look off or on. The wiring harness is high quality, all wires appeared weather sealed and secure. Overall the install was super simple and takes about 15 minutes from start to finish. That includes running the harness and tapping into the fuse box. The only issue I had with the install was the Tacoma fuses, lol. The fuse box under the hood is basically useless. They are ground switched circuits so the fuses are always hot. So if you use the add a fuse then the lights will never shut off. The only fuses under the hood that would work were the injector fuses, but no chance I want to mess with those. So I ended up going through the firewall where the wiring harness goes through and using the fuse box under the steering wheel. I pulled the 20a fuse for the washer fluid, added the add a fuse, and reinstalled the 20a in the add a fuse for the washer circuit. The lights use a 15a fuse. Now the lights turn on when the truck is on. You can also use a relay and tap into your running lights or another circuit after the switch, but not at the fuse. But that requires adding more stuff and is a lot of unneeded work. To go through the firewall, I just had to split the harness a little longer so the ground wire reached the spot I had a bolt. Grounding under the hood also meant I only had a tiny hole through the rubber seal in the firewall. This allows the rubber to seal around the hot wire after going through. Again I will say, excellent product all around! I couldn’t be happier. I’ve only had them on the truck for 2 days now, so I can’t comment on long term durability. But I expect they will be fine. One of the best cheap upgrades to enhance the look of the truck. Thank you!

Fit like they were factory parts, easy install and when not on can’t even tell they are there

One of the first mods I've done to my Tacoma. The install is pretty easy if you're technically inclined, but the included "instructions" are severely lackluster. Highly recommend looking up youtube videos to do it if you aren't comfortable or experienced. Also, I would hook the "add a fuse" up to the INJ fuse instead of the one for the headlights, that way the grill lights will be on as long as the truck/injectors are on instead of only when you turn the headlights on. That's up to personal preference though. Make your you put the correct lights in the correct spots as well (there are 2 "center" lights and 2 "outer" lights I guess you could say), so look at them closely and don't try to gorilla strength it into place if they aren't fitting. The lights are decently bright enough to be noticed even during the day, but not a crazy amount of brightness to the point it's too much. They are really great and come with everything you need to install them minus zip-ties, which I highly recommend since there is a very large amount of wiring (which I view as a plus since it allows various routing options for the wiring). All in all, it's a good kit and they look great. I've only had them a couple weeks so I will update if anything happens.

Before Installing in a 2023 Tacoma, READ THIS!! The Install Video is WRONG! A few things owners of 2023 Tacoma's need to know prior to installing these lights: 1. Do NOT follow the video describing how to install these lights. it's wrong. 2. Do NOT throw away the outer clips for the raptor lights as the video says. YOU WILL NEED THEM to install these lights in the grille properly! 3. Note that not all the raptor lights are identical. There are two "outer" lights and two "inner" lights. Look carefully before attempting to install them, and you'll see what I mean. If you try and install an "outer" light nearest to the Toyota emblem, it won't fit. Same is true if trying to install an "inner" light closest to a headlight. Save yourself the aggravation and look first. 4. The connector used for the positive cable to connect both ends is too soft and comes apart easily when attempting to crimp it. If you do so, it'll simply fall apart. Here you have two options: - Slide some shrink tube over one end and push it back. Then, push the connector together and solder it together to make a good, solid connection. Slide the shrink tube over the connection and use a blow dryer on hot to shrink the tube and insulate the connection. - If you don't like soldering the connection, then clip the crappy connectors off both ends, strip the wire back 1/8'th of an inch and use a 14-16ga bullet connector to connect the wires. Crimp solidly together and then wrap in good electrical tape. 5. The install video shows disconnecting the lights from the cable, stating it's easier to install the lights separately, then clipping them back together. WRONG! The cilps themselves are very brittle and break off very easily. After two of mine broke with minimal handling, I decided to run the lights from the passenger side and feed the cable through as I went, all the way to the fuseblock. It took a few more minutes, but I didn't break any more fragile clips. I think it took all of two - three minutes to do it this way, and probably no time difference from unclipping the lights from the cable in the video. 6. The light kit comes with two different fuse block connectors. I was not happy with the connection using the Toyota standard fuse connector. It didn't push in far enough and I was concerned vehicle vibration would cause it to come loose and I'd lose my headlights at the worst possible time. I opted to use the spade fuse connector instead. Better connection, more solid, sat lower in the fuse block too. That also required a mini 10amp spade fuse and a quick trip to the auto parts store for it. As this was my choice, no stars off for this. I wanted the best connection possible and wasn't comfortable using the Toyota standard connector lead the light kit also shipped with. (BTW: Kudos to the light maker for including both types.) 6. Rather than have the fuse block cover crimp the positive lead, I notched the cover where the wire exited the fuse block to avoid that and maintain the integrity of the wire. A small pair of wire snips was all that was needed to accomplish this quick task. 7. Black zip ties are your friend, don't leave the cables loose behind the grill, secure them. 8. Last thing: since I broke two clips because they're so fragile, I ended up using a small dab of super glue to secure the wiring harness assembly to the raptor lights and prevent them from falling out. A simple fix that shouldn't have been needed because of the very brittle clips these lights ship with. And so there's the picture of my 2023 Tacoma TRD OffRoad, which I picked up from the dealer last week and have about 350 miles on, still 'breaking it in.' The lights do look good, they're obviously more aesthetic than anything else. I hope the lights last, though not terribly confident they will due to the build quality and fragility of the clips on the wiring harness. Either way, they were cheap and will be easily replaceable if/when they fail.

Easy to install. Still looks good after a few years.

Love these lights! They are bright fit right in my new grille and are worth the money. So far so good with the moisture. Very easy to install.

The lights are bright and similar to OEM, light covers look fine but looks like water may get in if you force them or move the cable too much and break the silicon seal, so be carefull. The cabling is thick and connectors are kind of big for such small lights, project. I do not see why you need individual lights with a connector for each one of them because no seller will sell only one and for the price I guess you will end buying a new kit. So you need to route and zip tie all cables in a way that looks good and prevents issues with other cabling. The add a fuse socket is a good idea, but, most of the fuses in the box are hot, so, you cannot use the DRL (which is the best option) cause is always hot, and if you use LBL or other light (switched ones, not hot) fuses then the lights will only turn on at night when you use the car lights. The fuse they mention in the manual is always hot. I think is the D INJ one at the left side of the box. The one I ended using is 10A INJ on the top (next to big 80A INV one) and looks like the lights now turn on only when driving. Some people mention issues with that location, so I will need to keep an eye on it. I would recommend connecting this kit to the DRL cable using a "Y" connector or attaching the wire with a thing that can bite the cable without cutting. Plenty of options out there for that. but make sure you add a fuse to that new cable, a tube fuse will do well, small and convenient.

Easy installation and works great

Great product!

I ordered these Raptor lights for an aftermarket grill and they did not fit ( my mistake ). We made some adjustments installing them and made them work. I like that they are black and not easy to be noticed when they are off. They look awesome and the quality of the lights and wiring is great, love them!!

VERY PLEASED…with these lights. They fit PERFECTLY into the grill and LOOK REALLY SHARP. My vehical is a 2023 Toyota Tacoma.

Lo anuncian como luz blanca y carcasa negra, pero ¡¡siempre mandan luz ambar!! no mandan las blancas, lo regresé la primera vez y me mandaron por segunda ocasión el color equivocado,

I had high hopes for this kit. Install was fairly simple, I siliconed the seams where the Amber cover met the black base to be prevent water ingress. When disconnecting the connectors, a couple clips broke. I contacted the seller asking for assistance and they were incredibly quick in responding, didn’t hesitate to help and within 24hours I was very surprised with their response and kindness. I would purchase from this company again. Lights are super bright, uniform in brightness and color. Quality of the harness is good, instructions are helpful and easy to read and the fit & finish is about 4/5. Love the way the truck looks now and customer service was incredible.