(2-Set) 10" x 3 Teeth Carbon Steel Brush Cutter Blades with Washers - 2 Blades and 2 Washers - Blades for 20mm or 25.4mm Arbor - Compatible with Husqvarna, Stihl, Ego, and More

This thing is a monster rips through anything unfortunate enough to find itself in its path of travel thick weeds especially hollow stalks up to pribably an inch and 3/4 in diameter saplings whatever it doesnt care i recommend cutting only with the direction that rotates away from you and to wear boots and thick pants while using it the blade is extremely effective but also very dangerous i had it pick up a piece of wire and sling it completey through my shoe luckily missing my foot that was the last time ill wear anything but work boots while using it this blade is not meant for the faint of heart or a regular grass only yard and im sure by now you already know whether you need it or not if you do i highly recommend it its a little heavy takes a minute to spin up compared to a string head but the inertia it carries going through thick material is unreal

Got some tough weeds/brush to get through? Yea, we have been there. These blades are the bomb! we have used them to clear jungle back of an entire acre and continue to use them when we let the tough California grass or Guinea grass get away from us. Theyre thick enough to put up with some inadvertent collisions with lava rock and they don't come apart. They cut easily through even the thickest clumps of grass. The blade was easy to install on our echo weed and brush trimmer and fits perfectly with only the parts the trimmer came with. if you have some serious weeds to get through, this is going to be your friend. It will handle the lions share of the tough stuff and then you can come back with your string trimmer to pretty things up

Works good on thinner woody branches, brush. Might file it sharper, comes fairly blunt edged. I switch to the circular saw attachment for branches over 1/2" or so. Stihl FS 91r. None of the hardware helped - For now I'm using the string head as a nut to hold it on the shaft. I will go get the right nut and washer cuz the string head can hang you up in dense brush.

This is probably one of the best blades I've used to cut down blackberries what's my electric trimmer; which are very strong and will abuse you with their wicked thorns, if they fall on you

Cut well leaving you with a much easier job to do

The blade is fine but the advertising is very misleading. It says to sets making you think that you will get 4 blades. That is not true that $20 is for 2 blade. not sure It's worth that much money, but that's the way it is. They should change their wording instead of being misleading. Not sure yet, if I'm going to keep them or send them back just because of the misleading add.

Unfortunately after our AZ monsoons, my property was overtaken by knee high to waist high weeds. I burned up my cordless trimmer and decided to get my Badger weed eater tuned up. After the tune up, all was good but the bump of the string did not work, and the metal blade that came with the Badger was tweaked a bit and caused a lot of vibration. So, I found this one and the reviews seemed authentic so I bought it and am I glad I did. This blade did the job cutting these weeds and my 80 year old body was not overly exhausted. I would recommend this for sure, no need to shop or compare other similar blades. Worth every penny, and I bought another to keep in reserve.

Used these blades for trail clearing in a burn scar area with a Stihl FS131 between at elevations between 7000 and 9000ft in Arizona. Great for cutting back small locust, ferns, thick grasses and event smaller softwood trees. What's great about this blade is it truly gives you the most cutting range between the string head and saw a 40-80tooth wood cutting blade. Worked well cutting out thick ferns and at the same time up to 1/2 diamater locust and aspen. This wide range of cutting capability means you don't have to toggle between cutting attachments and their respective safety guards. These blades work with the string trimmer guard. They can also be flipped so you get double the cutting out of each blade. Since they are a non saw type blade they are also easy to sharpen. Per blade cost is about 1/3 of the OEM blades. I still carry the string head and a 80 tooth wood cut blade in my pack for specific use cases, but this blade is the default option for most jobs with moderately thick, younger brush.

Muy bueno para la hierba muy intensa

Excellent product. Used one blade extensively and it still looks almost new. Almost leaves me with the feeling my brush saw will wear out before I get through these 2 blades. I couldnt be happier with them.

Heavy duty -look good 👍🏼

Produit de qualite

corta bien los primeros 3 dias. desgaste muy rapido como esta demasiado suave el acero