Spigen Tough Armor Designed for Airpods Pro Case (2019) Drop Protection Cover with Carabiner - Charcoal

This case is 2 pieces (one for the top cover and one for the bottom) and is extremely well made. The silicone is thick and sturdy, so there is no chance it will tear, however, it is in no way bulky or aesthetically unappealing. The design is so good, it looks like an OEM part when installed. Even the clip that comes with the case has been designed to match the case's aesthetic and is of extremely high quality. While priced above its competitors, you will almost certainly forget about that disparity once you install it on your airpod pro case and experience how the high level of design and craftsmanship of this product perfectly complements the quality, beauty, and functionality you've come to expect from most apple products. The only criticism I have of this product has to do with the double-sided sticker included. This sticker used to secure the top portion of the case to the top of the airpods case, so it doesn't slip off. The adhesive on the first sticker I installed did not secure the piece at all. Fortunately, Spiegen includes 2 stickers for you, I removed the faulty sticker and installed the spare, and it worked like a charm. The adhesive on the sticker is very strong and keeps the piece securely placed on the airpods. I dont blame Spigen for this at all, in fact, I commend them for including a spare just in case.

This rugged case kit is a good wat to protect your precious little Apple AirPods Pro case. The hardened case barely changes the size of your case but is able to protect from scratches and dings. Charging is easy with an opening on the bottom with the charging light still being visible. Case kit comes with a few extras like hooks and LED light visibility which helps to keep track of your AirPods while you're using them or you can use it to wear them on the go if you don't wanna bring your case and a carabiner clip that allows you to attach your case to your belt loop, purse, backpack or even your keychain

This case is ideal for the task with 2 minor modifications in my case. I found that it would not stay fully open, and was snapping shut. The backside edges were a bit too long keeping it from seating perfectly. I removed a very small tip off of each side using a sharp Xacto knife. It seated perfectly. I resolved the partially open (rather than completely open) issue by removing a small strip right above where it sits on the hinge. I could have done a neater job, I was a tad hasty. Case opens and closes perfectly and is seated correctly. I gave 4 stars because it works as intended after minor modifications. I have a similar case for a second pair of AirPods and it worked perfectly out of the case. It is a bulkier case, but attractive. I recommend it over this one unless the bulkier style is not ideal for your needs. It is the SUPCASE Battle Pods case. I added a keyring and carabiner to that one. Hope this helps you!

Great case for the price. The case is made of rubber all rubber. The case is a two piece one for the bottom portion and one for the top. The top comes with a piece of adhesive that goes under to help it hold on to the top of the air pods. Look at the pictures posted to give you a better idea of the case. It will do the job the only thing is that the top needs a piece of adhesive to hold it on. I would highly recommend this product.

I had purchased these to protect some new airpods pro that I had purchased. While they do offer good protection from drops,( I know from experience)there are some issues.The product description doesn't say that these are rubber.In addition the rubber feels cheap and low quality. While they are ok, the top part that covers the lid to the charging case has come off multiple times. That explains why they come with the extra piece of 2-sided tape in the case. While I don't think that they are bad enough to return, I can say that I wouldn't buy them again, nor would I recommend them to a friend or family member.I will be keeping them on my airpods pro headphones until I can find suitable replacements.

I switched from a cheap no name brand case to this one. This case is substantial. The rubber is thick. The hook part especially is well made and will not tear. I did not know until I received the case that it is in two separate pieces. The bottom piece fits ok — due to the material you will have to nudge it into alignment. For the top piece, close the lid and then put it on — align the front first. I find that the top piece stays on without the sticky tape for now. Check out my video as well. Recommended.

Unlike the previous case I bought, this one actually fits! Good job Spigen! No rubber hinge connecting top; it has adhesive to secure. Pleased! Update: I've had the case about a week now and I couldn't be more pleased with it. The little adhesive strip (included) that holds the top on works great! I can see how somebody might mis-align things if they installed the top FIRST and then installed the bottom portion of the case SECONDLY. But if you put the lower case on first it's a SIMPLE thing to align and install the top portion if you just take a few seconds to do so.

I ordered four different AirPods Pro cases to find the one that best fit my requirements. Requirements: 1) Color has to be mainly black. 2) Durable enough to prevent scratches and scuffs when the AirPods are in my pocket or backpack. 3) Under $20. 4) Any material except for silicone. Pros: • Nice looking rubber design (feels like a tiny grenade in the palm of your hand). • Easy access to the sync button on the back of the case. • Excellent shock-absorbing material on the corners. • It includes double-sided tape to secure the top/bottom pieces so they don't come off. Cons: • LINT MAGNET. Out of the box it was already surrounded by lint which would not come off. • Horrible SMELL when removed from the package that didn't get better over time. • The carabiner was poorly made and felt cheap. • The rubber feels flimsy on the thinner parts. • Difficult to put in/take out of my pocket. Review: The Spigen Tough Armor AirPods Pro case came in 4th place (last) on my list. I really wanted to like this case after watching a review on YouTube. Unfortunately, although it checked all the boxes on my list, it had some issues I could not get over. First impressions are everything and immediately when I opened the packaging, I was greeted by the horrific smell of the rubber. Not exaggerating, it smelled like my dog's poop. Then, once close look revealed a bevy of lint surrounding all the sides of this case. The easy access to the rear sync button was the best thing this case had going for it. Although the corners felt thick and durable, the center rubber parts of each side felt thin and didn't instill confidence in the case's durability. I'm confident this case would hold up to scratches and scuffs and if it didn't, the lint would have you covered. In the end, I chose to go with the Caseology Vault (https://amzn.to/31m3amY), the winner of my round-up. I would not recommend this case to anyone who plans to keep their AirPods Pro case in a backpack, pocket, purse, or drawer.

ürün cok güzel kargo hızlı cok teşekkürler

Contrairement aux tough armor de la même marque pour iphone, ici, on a une protection plus souple, type silicone, mais qui amortit les chocs efficacement en cas de chute. J'utilise ce produit depuis 1 ans et demi et j'en suis très content. C'est solide, la matière n'est pas cheap du tout. Il n'y a pas de désagrégation ou de déchirure.

Se acopla perfectamente a los AirPods Pro. Buenos materiales.

Exactly as described

Gummigaktig men passar bra och håller bra!