Tow Tuff Heavy Duty 4 Wheeler Weight Distributing Adjustable Trailer Moving Dolly 800 Pound Load Capacity for ATV and UTV, Silver

Dolly appears to be well made and sturdy enough to last a long time. Assembly instructions were minimal but with significant experience in mechanical assembly, automotive work, etc. it was easy to figure out. The hitch ball supplied is 2". It has a smaller diameter shaft / thread, but it was easy to find a different diameter ball with the correct diameter shaft / thread. This enables use with trailers having different diameter ball requirements. I use it for both a 1-7/8 inch ball size trailer as well as a 2" just by swapping the ball. Overall very satisfied with this product - it works extremely well to eliminate the trailer weight on the power hauler that I use for moving trailers around.

This town dolly is fantastic we are using it so we can move our wood splitter around with the SideXSide on heavily wood property. The only issue was when delivered it was dumped on our porch & the box looked like it had been in a war & lost. No damage to it but was missing some bolts & washers. The box had been taped up & the packing material inside was all busted up. Thankfully the tow dolly it self wasn't damaged.

We used this dolly to pull a ~4,000 lb fish house on the lake behind a four-wheeler. The frame is solid and the welds look decent, and from a strength standpoint the dolly does work for this application. The issues are with machining and components. There was paint on the wheel spindle diameters where the bearings are supposed to slide on. The paint prevented the bearings from sliding over the spindle and had to be sanded off. One axle had the cotter pin hole drilled off-center, making it impossible to install the cotter pin once the castle nut was installed. One spindle also had thread issues that required filing before the castle nut would thread on. The factory bearings are very poor-quality unsealed ball bearings. The wheels do have grease zerks and are intended to be greased, but even with grease the bearing quality is insufficient for real use. After about ½ mile of slow-speed operation, both wheels were shedding metal, one bearing shield was crushed from the factory installation, and one grease zerk fell out. I replaced all bearings with sealed bearings (6005-2RS, for reference), which resolved the issue and eliminates the need for greasing. I recognize this is one of the least expensive dolly options on the market, and to some extent the overall quality aligns with that price point. That said, the dolly works, but it would not last long with the original bearings and machining defects. Expect to inspect, modify, and upgrade components if you plan to use this beyond very light duty.

This trailer dolly is well built with a nice finish. Assembled easily. Two caveats however; 1) the flange that curves around the ball receiver part was too wide for my application. I had to grind about 3/16" off so it did not rub on the frame and 2) I had to cut of about 1/2" to allow the hitch lock to close easily. No.. 1 had to do with my receiving end of the front of my gold cart. But No. 2 had to do with the hitch locking mechanism. When viewing from underneath the tongue bar rubbed against a flat piece of the locking mechanism and caused it to cant some and difficult to latch freely. Cutting the 1/2" off it fixed the problem. Overall I am happy with build and quality of the dolly. My use for it was to be able to move a 14' cargo trailer with my golf cart. I mounted a 2" ball on the front ( this is where the rubbing issue was). Also fitted a 2" receiver to the back which was well under the foot step of the rear facing seat. This is why I needed the extra length on the dolly tongue. While tricky I can push and pull the trailer with my golf cart. Why push you say? I needed to have the trailer head in in it's parking spot but did not have enough room to pull it in with my truck. Suits my purpose perfectly. Also it can be used to ramp a jet ski at the lake with the gold cart. Very happy solution to my situation

Looks heavily built enough for my application (14 foot cargo trailer). It was missing a bolt and some washers. All the bolts should have washers on both sides too not just one in my opinion. The axle nuts bottom out before even touching the bearings on the wheels. This is from the bearings being pressed too far into the wheels. Another review shows a picture of the bearings that was similar to mine. I had to get extra washers for that to take up some of the play so the wheels didn't wander back and forth on the axle. The locking pin for the hitch to the atv was too big for the hole so I had to get a new pin there. It did survive shipping without a scratch but I could see where some people may have had issues with the packing. One of the wheels was missing the grease zerk. My trailer uses a 2 5/16 inch ball but the dolly has a 2 inch ball. The shank size on the dolly is too small to accept the shank of a 2 5/16 ball so I just used the 2 inch. The trailer seems to hang on to it ok. The good part is it really makes moving the trailer easy on your atv.

To heavy for the delivery drivers. Box came all broken and taped up. Missing the small parts. I called the vendor and they sent all missing parts. Works great.

I wish I could give negative stars! Beyond upset!!! This is the second time I have ordered this product, and the second time it has been delivered missing parts! The first order was missing. Wheel and many other list parts! And this order came with both wheels, but missing pretty much everything else! This is absurd! And I can’t geg through to the seller to contact me! (I tried contacting the seller after the first order came without a wheel and misc other parts, go zero reply. Taking my family on a vacation and NEED this product for our trip, so I just started a whole new order and will return the other one. Now I have to return both orders and figure something else out all together. To say I am NOT happy is an understatement! SAVE your time, money, and FRUSTERATION!!! Do NOT PURCHASE THIS PRODUCT!!! I’m now off to figure out how to get what I need and get ALL THE PARTS AND MISC PIECES together so that I can take my wife, daughter, and other family members on a camping trip they are very excited about! I’ve spent so much time messing around with this company trying to get what I need, that now I am in a rush to find what I need. DO NOT PURCHASE! Save yourself the headache!

Overall it's a great design. I had to use a large lock washer not included, to keep the include 2" ball tightened to it's adjustable mast. Another simple fix was that the axle was drilled approx 3/16 inch to far out toward the end of the spindle for the castle nut to be locked in place after the wheel hub was seated, and the include cotter pins were not large enough in diameter to confidently catch the castle nut slot, and light duty enough that it could easily sheer off if the nut backed off, so I upgraded those pins to a size that barely tapped into the spindle, and I bent the hairpin of the new cotter pins toward the nut slot to grab and stop the nut from coming loose after it was seated properly. And the hitch arm pin is also light duty that there is a possibility the keeper pin to the provided pin could catch any debris such as tall grass and pull itself out. It does have a light aluminum chain attached to the pin, and that chain has a 1/2 inch split ring attached to the chain to connect the chain to the grab handle so when you pull the pivot pin out, it can dangle and stay attached to the tongue. I just upgraded that as well with a hitch pin, clevis style. Other than those three minor upgrades, it will work safer and longer without a mishap. It tows well behind a ATV. And my ATV trailer transfers it's loaded tongue weight to the dolly and pulls easier.

Facile à monter Fonctionne très bien avec mon vtt, pour une remorque 6×10 en acier Sans le dolly, mon vtt était écrasé à terre. Maintenant, tout est ok La seule chose est que si vous avez à reculer... c est un peu plus dur..lol

makes it easy to move trailers around the yard

First wheel slid in nicely, second wheel required some sanding of the spoke to make it fit Works fine.