GOOFIT PD24J Carburetor 24mm Carb for 4 Stroke GY6 125cc 150cc ATV Go Karts Motorcycle Scooter Mopeds 152QMJ 157QMJ Engine

This carburetor works absolutely flawlessly. Perfect fit and everything plugs up the way it's supposed to. It is an exact replica of what I had on my bike to begin with and does exactly what it's supposed to be doing. Very easy to install very good quality.

So Far, so good. I made the decision to purchase this Carb because from the reviews stated the same exact problem I was having. My son received a brand new 150CC TAO TAO atv on his birthday from East Central Sports in North Branch, MN. This chinese brand ATV is garbage. We had 3 carburetor replacement within the first month. The store just kept replacing the carb and it worked every time. Furthermore, we had 2 more carb replacement a couple months after, which only lasted a couple months because we didn't ride it during winter. A total of 5 carb replacement on a brand new machine. The shop was far from my house and the inconvenience of my son's atv dying in the middle of a field during riding just straight sucks. All in all, I purchased this Carburetor, replaced it myself and the ATV has been running strong since. This is the most hours we've put on the ATV and it's still going strong. Great replacement Carb & Good price also. I'll definitely buy another if i need it.

This carb fit my Chinese quad and it started right up and idled perfect. The only thing I would advise is change all the fuel lines and vacuum lines. These hoses that come on the carb are terrible and will harden and crack within a year. I ordered a hose kit for $7 on Amazon and put those hoses on the carb.

I have been trying to figure out these carb’s setting for yrs now. I always get it wrong. I recently bought a new bike n didn’t touch that carb n it’s been working like a champ doing 53 miles a day for 4 months n counting. Then I know my old bike needs one of those perfect setting carbs where I wouldn’t have to mess with it. I have tried changing the jets, I got it too tight which makes the engine too lean like it’s on high idle. That was 100 x 35. I have tried using glixal 26mm carb, but I did mess with the air n the idle screw. I have tried using glixal 24mm carb, again I mess with the air n the idle screw. This time I try using Goofit’s carb 24 mm without using anything I learn from YouTube n it works like the new bike. Smooth throttle response, great idle, and a button press at startup. I’ve made this my goal for both bikes to rebuy this specific goofit carb n just install it in there should any of the carbs went bad in the future. U have no idea how frustrating it is when ur trying everything u c online, come to find out none of them works...

I have a 2020 Amigo scooter that I have had for 7 months. I went out to start it and it would briefly start and then quit. I removed the auto choke and taped the hole. The engine started right up. I then replaced the choke and it still would not start. I purchased this carb that fit right in with no mods. Engine started right up and runs better than with the old carb when it was operating correctly. A six month old new scooter should not have the carb stop operating........ A new factory carb was 80 dollars which was ridiculous. Time will tell if this will last. I will update at six months.

I purchased a Kymco 125cc Scooter that was parked in 2013. It wouldn't start for them the next season, so it just sat. I took the carb off and cleaned the jets. I got it to start, but it wouldn't stay running. I messed with it for several hours trying different things, but no luck. I ordered this carburetor and it arrived in two days. It took me about 10 minutes to install. The Scooter cranked right up and runs like new. Wish I had just ordered this to begin with.

Installed it easily, just had to loosen the air filter box. Cranked up and idled perfectly without any adjustments. Has actual screws on the float bowl and top diaphragm. For $30 can't beat it. Bought it again Oct 2022. Made the same mistake using Ethanol gas and letting it set too long last year. This new one works great, no adjustment was needed. No more ethanol gas for this and the mowers.

I bought this carb mainly because it was cheaper than buying all the parts to rebuild the original. That said, my expectations were not all that high despite the overwhelmingly high reviews it has. I also picked this one because it says in the description of what it fits that it will fit my daughters Buddy 125. That's where the three star review comes in. The carb itself is too long front to back, too tall, and the throttle cable bracket/setup is too widely spaced and the throttle cable bolt is too big for the bracket. I reversed the bracket and finely tuned it with a large hammer until I got the spacing I needed, drilled out the bracket and viola, throttle cable is hooked up. Cut back the front manifold and reamed it out to gain 3/8" and with a box cutter and a propane torch manipulated the air intake manifold and kind of forced it in place. It sits at an angle now, but it is sealed up and works. Had to make a longer tube that goes between the manifolds, threw out the fuel filter and replaced the fuel line.Lastly I had to make a spacer for the access lid inside the storage well under the seat to clear the top of the carb when the seat assembly is installed. I would like to know what that stylish wrap around the carb twice vacuum line is for. I am guessing it is vital to some other vehicle, not our Buddy 125. On the plus side, once installed, the scooter really scoots along! (Sorry) It seems to be working just fine without any adjustments to the idle or mixture screws. Time will tell how long it will last, and if it goes wonky on me, I will buy another one. Yes I feel it only deserves three stars because of the fit, but really, a working carburetor for less than $30? AS long as you have a smidgen of mechanical ability you can't go too wrong with this one.

I replaced the carb on my daughters 4 wheeler quad using this product. It arrived on time and installed perfectly. Started right up. Many thanks. I have a very happy daughter now.

rien a redire livré en temps livreuse tres agréable produit tres bien emballé dans une boite en plus du carton de livraison semble de bonne finition tres satisfait et le plus qui fait tres plaisir le porte clef de ma marque c est lintention qui compte !!!

Este carburador lo he montado sobre una Sym Symphony ST 125 del año 2016. Fácil sustitución, aunque hay que tener en cuenta que el tornillo del aire estaba totalmente cerrado (a tener en cuenta). Ahora arranca por la mañana perfectamente. La moto ha perdido arrancada, me imagino que el chicle de baja será mas pequeño que el original. Consumo y velocidad punta igual que el original. Calidad-Precio muy bueno.

Wirklich top in mein Quad eingebaut und sofort ging es los. Keine Einstellarbeiten und nichts. Das Ding hat einfach gleich funktioniert.

Ho acquistato questo carburatore 24mm per montarlo sul mio scooter vespa 4t, ho voluto aspettare un po' di tempo per provarlo veramente veramente bene prima di dire una recensione, proprio per dare una recensione più completa e posso dirvi che mi ci sto trovando veramente bene, è completo di tutto, cavo per avviatore a freddo, vite miscela aria/benzina, vite minimo. I materiali della costruzione sono abbastanza buoni per il prezzo, è fatto molto bene, lo ho acquistato il 14 luglio e lo ho subito montato e ancora non mi ha mai dato problemi.