Car Headlight Film,30cm*300cm Self Adhesive Car Light Film, for Smoke Fog Light Taillight Headlight Tint, Vinyl Warp Film Sticker + 2 Squeegees (black)

Long time buyer, first time reviewer! Honestly this product essentially drove me to do this review because I wanted to make sure its represented correctly after what I can only describe as a pretty much seamless experience! Now my expectations were simple, I have some lights, that were faded, or slightly discoloured and I wanted a tint that's light enough but at the same time sturdy enough to get around these new fancy headlights that feel corners are a must ( Anyone who owns X5's will respect the boot light fading!) I had read this and other product reviews, some saying it scratches, problems applying etc... honestly for this reason I bought 2 rolls as I expected I may lose a piece or two. Every piece worked great, I pulled the side protecting the glue as I was going along, a little hard to start but once you have worked out a routine I found it simple. For me the side protecting the sticky was on the outside of the roll, that may help others if all manufactured same way. Applying it, on straight pieces.. a breeze, it just stuck as I applied it, no hassle, and if you got a trapped bubble.. you could peel it back up. As you can see though my lights as I got to the main units are anything but straight. Heating it, again simple, a little bit softer than I had experienced before with Vinyl for interiors but still easy enough and I found it malleable enough to do a 3 way curve. I had to stretch fit at one point, heating and lowering... again no issues with this. Finally when its all done, cut into shape, the now ' top layer' can be removed.. you either find a little bit that's bubbled up, or I scratched with my fingernail a little until it did, and again the top layer comes off, giving you a fantastic finish. I did use a vinyl scraper with a microfibre cover on one end ( not the included tool ), and it did look like it was leaving micro scratches as I was applying it... obviously this was the third layer in my case and removing it, made my lights look like new ones. The size of roll is good, I cut the shapes out beforehand as squares within a 2-3cm tolerance, and measuring it looks like I have enough for both front lights too. Its not a promise it will cover all cars, but I was impressed by how much you get. Hopefully this helps others who might be on the fence deciding, because I found this to be a bargain deal, I was expecting many more problems with the quality that just didnt surface for me

Brilliant film allows you to really pull it to shape it round the lights and looks amazing and still let's enough light out to see in the dark fine. Word of warning in the UK though as tempting as it is don't put it on your number plates as I found out its a £100 fine but traffic cop approved on my lights so all good there.

An absolute junk. The glue which is also the tint layer detaches from the foil if peeled back a bit & rips which ruins the whole job. Brittle, impossible to curve, heat or no heat. If you peel it back to remove a bubble it will leave visible peel lines on the glue which can't be gotten rid of.

Actually quite easy to use. it does come rolled but the further you get to the middle the more creases you find making it difficult to get a smooth flat finish. Use of a heat gun in quick blasts to smooth it out is definitely a good idea and makes the end result more achievable and helps stretch in difficult areas . We were wrapping a 2013 bmw and although they are not the curviest of lights they still have curves and odd edges. For the price I can’t complain and definitely gave us something time consuming to do during the covid lockdown. We are happy with the overall results

Poor quality came pre creased down the centre not allowing me to apply the film smoothly, each time applying it just didn’t stick properly or stuck too much so there wasn’t an ability to rework it. Also came with no instructions so you cannot tell how to apply to their specifications. Overall not happy and a waste of £20 in total as I had to buy two lots. Waste of time and money

delivery, nice tint where its not too light or dark, its easy to work with if you can tint properly unlike me!

Great product. Very easy to apply, was the exact shade I required. Definitely recommend

I have wrapped 3 of my cars tail lights, needed a longer bit and thought I'd try this, short story is absolutely wasted my money. Firstly the roll was rolled up the wrong way with the outside rolled to the inside making it curl the wrong way. Secondly the protective outside layer really makes the job a lot harder. Thirdly the backing is nearly the same thickness as the protective film further increasing the difficulty. Lastly the actual film is very brittle ripping, tearing and cracking with the slightest of tension when cold. I'm sticking with the VVIVID tint from now on.

Ik heb het geprobeerd bij mijn knipperlichten maar het blijft niet ‘plakken. Vond het het proberen waard maar werkt helaas niet

Parfait conforme à la commande et rapide

Dès qu'on chauffe le film,il se déchire ou ne colle plus, mauvaise qualité

Diese Mioke Auto Scheinwerfer Folie hat meine Erwartungen übertroffen! Die Qualität des Vinyls ist ausgezeichnet, und die Größe (300c*30cm) reichte mehr als aus, um meine Scheinwerfer, Nebelscheinwerfer und Rücklichter zu bedecken. Die schwarze Farbe verleiht meinem Fahrzeug einen sportlichen Look, den ich liebe. Die Anwendung war auch sehr einfach. Die Folie war gut geschnitten und ließ sich leicht auftragen, ohne Blasen oder Falten zu hinterlassen. Ich bin wirklich zufrieden mit diesem Produkt und kann es jedem empfehlen, der sein Fahrzeug optisch aufwerten möchte.

Calentando un poco se moldea mejor