Pilot Automotive WH553-16S-BS 16 Inch Spyder Black & Silver Hubcap Wheel Covers For Cars - Set Of 4 - Fits Most Cars

This came 2 days ago and I installed it yesterday. Took about 5 minutes for me to figure out how to place the metal round rims. The instructions aren't very helpful. #protip: insert 1 end of the metal rim first into 1 of the holes in the plastic prong. Then insert the other end (on the direct opposite side) into the hole on that side of the plastic prong. You want about half of the metal rim to be on the outside of the plastic prongs. Then you will apply some pressure and place (slowly) each point of the metal rim by lifting it slightly to move it into the inside of the plastic prongs. Make sure the metal rim sits securely above the slightly raised plastic ridge under each plastic prong. Honestly, I don't mind the "terrible" paint job that most reviews on here pointed out. Who is going to be THAT close to my tires looking at the bits??? 😂 Far away, it looks really nice (see pictures). It actually looks expensive quality & has a sporty feel to it. I'm am quite impressed, and so is my father! These popped right into the tires, no issues at all! Night and day fit difference from the cheaper Walmart ones (~$26) I bought a few years ago, which broke after 1 oil change & tire rotation. They never fitted correctly and I had to duct tape 1 point of each hubcap to the actual wheel to keep it intact. #ratchet 😂😂 😂 These ones (15 inches) bought from Amazon fit like a nice glove, and so far so good! I'll come back and update the review in 6-12 months after more driving time. I will consider buying another set for back-up, if these last past half year mark. *Edited 05/26/2023: I couldn’t wait 6 months before I update my review. By now, I have gone through 1 oil change/tire rotation and 10+ car washes. The hubcaps are still intact, sturdy as ever as the first date I installed them. Super impressed! My father is very critical of ever buying non-OEM parts, so he was going to tease me about not buying Toyota hubcaps. He has been giving me compliments about these “generic” sporty-looking hubcaps. I will definitely buy another set as back up in case they stop manufacturing these. LOL!* **Edited 10/29/2023: Soooo after like 30+ carwashes, 1 of them finally popped off and I lost it some time last week.😂 Not bad quality, I don't regret buying them and will still rate them 5-star. 2 days ago, I replaced all 4 of my tires and self-removed the 3 hubcaps still intact on the wheels (can't trust those guys to be too heavy-handed and break the hubcaps, which had happened a couple of times to me in the past before so I've learned my lesson). The 3 remaining hubcaps I have are still as sturdy as the first day I put them on. Goodness I bought a back-up set so now I can have spares to replace. 🤪🥴**

These fit perfectly on my 2011 Suzuki Kizashi and were easy to install and look great. Delivered quickly and packaged well.

I've been really pleased with the Pilot Automotive WH553-17S-BS wheel covers for my car. They fit perfectly and give my vehicle a sleek, upgraded look. Installing them was straightforward, and they snapped into place securely without any hassle. What I like most about these hubcaps is their stylish black and silver design. It complements my car's color scheme nicely and adds a bit of personality. I was worried about them being too flashy, but they strike a perfect balance. Durability is another plus. After several months of driving on various road conditions, including some pretty rough ones, the hubcaps have held up well. There's no sign of cracking or significant wear, and they still look as good as new. One thing that stood out to me was how they didn't budge or come loose, even during high-speed highway driving. That's something I was initially concerned about, but they've proven to be very reliable. If I had to point out a slight drawback, it's that they do require occasional cleaning to maintain their shine. But that's a small price to pay for the aesthetic upgrade they provide. For anyone looking to enhance their car's appearance without breaking the bank, these wheel covers are a fantastic choice. They offer a great mix of style, durability, and ease of installation.

This is my wife’s car. We live at 9200 feet in the mountains and she is more comfortable with dedicated snow tires on her car in winter time. I had 17” snow tires from previous Subaru Outback. The new one came with 18” wheels. It was cheaper to buy 17” steel wheels than it would have been to buy a new set of 18” snow tires and it makes changing summer / winter tires much easier because the tires don’t have to be taken on and off the factory wheels. The plastic hubcaps / wheel covers appear to be good at what they are intended for. They were easy to install. I had to adjust to medium size by moving wire as illustrated in the diagram in listing. I had to open phone to find the order and to figure out which holes to place the metal retention ring in after the default setting was too lose. The shipment should include a paper copy of the reference diagram. Not a big deal, but including it should not be a big deal either and would have saved me a couple minutes. The plastic is very lightweight and the painted silver finish scratched easy. I used a wood block and hammer to tap the 1st one in place because I didn’t have a rubber mallet. Even the wood scratched paint where it touched the finish. Doesn’t look bad but was surprised how easy it scratched. I installed the other ones using the palm of my hand and a few good whacks around the outer edge. They look better that plan steel wheels. Have driven with around a little in snow and rough roads and they are secure. We will see how well they hold up after a winter of snow, ice, and dirt roads. I will update review after a season of use. Happy with purchase.

I had been considering getting new custom wheels for my car for a while but then COVID hit and that idea went out the window. I kept looking for an alternative and I came across this hubcaps. They looked cool and did not have that fake look that you see on other styles. I read all the comments about them and I was kind of hesitant after reading all the bad comments about quality and installation. There also were quite a few that had lots of praises about them. I read all the comments and looked at all the pictures but I could not find one installed in a car like mine so I had my doubts how it would look on it. I decided to get them and take the chance. One of the most common comments was about the finish quality of the paint. My set looked very well finished and had nothing to complain about. The installation was very simple, I used the wired setting with the most stretch available and they locked perfectly. There were a lot of comments about the wire not having an indentation for the air valve on the wire and having to bend the wire to make it fit, but in my case I have metal stems installed on my wheels and the wire did not interfere with the valve. Before installing the hubcaps I painted the original wheels with black Rust-oleum paint to cover the wear and faded marks from the old cabs. I also bought the round NISSAN decals and pasted them on the center of the cabs and it did really gave that original equipment look. (See close-up picture attached). I am very happy with my purchase and you can see it did upgrade the look of my car without spending a lot of money. My sister in law owns a Lexus with OME wheels that have the same design as this hubcaps. (See picture attached for comparison)

One of the hubcaps fell off after just a few months. I definitely installed per the instructions. I tried to contact the seller but the phone number listed on Amazon was invalid and the website server “stopped responding” after several attempts. Poor customer support after the sale. I would not buy unless you don’t mind driving around, looking like this.

I've had these for almost 3 years now. They arrived in perfect condition and were easy to install. They still look good and they have never fallen off of the tires.

These are incredibly cheap.. The main problem is also one of its positives and its that they fit very very tight and snug which is exactly what you want, however the plastic clips are so cheap and chinsey that they break really easy. and since it fits so snug you have too really force them in hard and it's super easy to break one clip and then your entire purchase will be worthless because you will not be able to use the one you break. The key is having a method to get them in without breaking them that's better than just trying to shove them in.. In my opinion what you need is 4 arms instead of 2, so you can press it in hard and fast from all four clip points (I did this myself sitting down and using both my feet and hands to shove it in even in one strong blast) CONS - Very expensive, I paid half the price for a similar product three years ago and much like everything inflation is the excuse and this product is now double what I paid a short time ago - Cheap plastic clips that will break easy if your not careful and you instantly loose your money (or at least you have to return and try again, so make sure you install them when you get them so you do not loose your return window) -Very poor paint job that in my opinion you can absolutely fix by detail painting these yourself and they will look sharp. PROS -If installed correctly and undamaged they fit very snug and clean on the wheel! 4.9/5!! -After detail painting them myself before putting them on, I have to say for some quick plastic throw on cover plates they look really good! Probably the best I've ever seen from snap on!

Very good 👍🏼

Great caps, Im not sure about those with bad reviews on the installation, seems like people just don’t understand how it supposed to work, even it is very simple. Start with small size ( A-C) if you install and can rotate them on the wheel, the size is small, take them out and do medium ( B-C or A-D, I personally prefer B-C as the air PIN hole will seat more center to the actual PIN of the wheel ). Place them, if it tide and you cannot rotate them ( after installed ) it is a good fit, if not continue to big size B-D ( don’t start from this size). Keep them in home ( not outside in freeze) before installation, this will keep them more flexible during the install on the wheel. Still not sure how durable they will be ( I have them for like a month ) but till now no issues, Looks great, no paint issues over temperatures between -10+15c till now.

Installed it by myself in my Kia Seltos HTK . Looks awesome . Enhanced the look of car . Looks like diamond cut alloys . Great quality material and paint . Extremely Satisfied. People mesmerised by its looks gets confused whether it is alloy or wheel covers . Very cost effective solution if your car does not have alloy wheels

Que el diseño es muy bueno. El material muy resistente...

This is a great product that fits perfectly, was easy to install and looks fantastic on our car. Perfect for a Ford Kuga! The order was dispatched quickly and arrived in Australia earlier than expected and delivered a week before estimated!