FlowLift™ Dual Monitor Stand, Fully Adjustable Gaming Monitor Desk Mount for 13–32″ Computer Screens, Full Motion VESA 75x75/100x100 with C-Clamp & Grommet Base, Each Arm Holds 4.4 to 19.8 lbs

Not only was this easy to assemble & install, taking just a few minutes, but I can barely even think of anyway it could be improved. The components are primarily cast metal, so for the price the quality seems great. I appreciate that it uses two clamps and a nice big base for connecting to the desk surface - this seems very sturdy and is holding the weight of two monitors just fine. I have a 23" and a 27" mounted. It was lucky that both of my screens had VESA screws from the factory so I didn't need to use the ones included in the kit, but the kit includes everything needed. I also like that there are set screws for every joint, allowing you to tighten down the positioning if you want to. The cable management clips built into the arms are super handy to minimize cord clutter (yes I know there is still a lot of cords in my photo). Here is one thing I will say - the cable management is clearly designed for just 2 cords per screen - 1 power and 1 display. If you wanted to run a power cord and two display cables to a monitor I think it will be quite tight. You might just barely get away with it. For me I ran power, display, and a thin audio cable through and even that was a little bit of a challenge. Still, I'm glad they are there as it does help to hide some of the under-screen cable clutter. Overall this was a slam dunk and I no longer need to use a stack of books to get my 2nd monitor up to the proper height. I should have got one sooner!

★★★★★ **Cleaned Up My Desk and Works Great** This dual monitor stand made a huge difference in my desk setup. It freed up a lot of space compared to using the original monitor bases and made it much easier to position both screens exactly where I wanted them. The arms feel sturdy, and the adjustments are smooth once everything is set up correctly. I can easily change the height, angle, and position of each monitor, which is especially useful for gaming and working at the same desk. Installation was pretty straightforward, and the finished setup looks much cleaner and more organized. If you're running two monitors and want more flexibility and desk space, this is definitely worth it. Five stars!

Bought this for my dual monitor setup and it's been rock solid so far. I have it clamped to an Ikea desk (my battlestation setup) and the clamp had no problem gripping the desktop without damaging anything. The gas powered arms work exactly as described. Getting both monitors positioned where I wanted them took maybe a couple minutes of adjusting the tension screws, and once they're set they stay put. No drift, no sag, and I can still reposition a screen with one hand when I want to tilt one toward the rest of the room or swing it out of the way. The biggest win for me is honestly the desk space. Having the area under the monitors completely open changes how usable the desk is. Stuff that used to crowd around the monitor bases now just slides underneath. One minor note: I haven't used the cable management rails yet. You have to detach them from the arm to route the wires through rather than just snapping cables in, and I didn't feel like unplugging everything to do it. Not a dealbreaker at all, just something to know if you're expecting to add cable routing after the fact. I'll probably get to it eventually. Installation was straightforward and everything felt sturdy out of the box. If you have a two monitor setup in the 24-32 inch range I'd recommend this without hesitation.

I'm pretty impressed with this dual monitor arm, and see why it's (currently) amazons "recommended". Installation is straightforward and when doing the C-clamp style mounting, the instructions are completely unnecessary. The arms are very sturdy, and can be locked into position once the desired location is set. It holds my Acer 32" monitor without breaking a sweat (though it's a very light screen, to be fair. Lighter than alot of 27" ones i've owned) though it struggles a bit with my featherlight 15" second screen. This isn't a downside to the stand, as it explicitly gives a weight rating it needs to work with, and the small screen i use is FAR below the minimum weight. Becuase of this, with the arm tension loosened all the way, I'm just BARELY able to mount that screen as low as possible. If i give it any upwards force, or try to raise it even a centimeter, the springs will launch the arm (and monitor) all the way up, which jars the entire desk. So, just something to be aware of. Again, this is MY problem, not the fault of the stand, as i'm not using it in it's intended fashion. I only really have 2 complaints, and theyre things ive noticed on the 3 seperate sets of these i've bought over the last 6 months....the tension bolts are INCREDIBLY tight and can be very difficult to adjust for someone who might not have the most wrist/grip strength. And finally, they include 2 sizes of screws. The longer ones are M4x30 screws, to be used in conjunction with some rubber/plastic spacers for curved monitors. So far, on every monitor I have paired with these (with the exception of one Dell 27" with a dummy thicc plastic back shroud) the M4x30 screws have bottomed out on EVERY other monitor, far before they were actually tight, resulting in a loose, wobbly screen. So, maybe plan on making a potential run to the hardware store for some M4x25's to use instead. Those two reasons are why I deducted a star. Aside from that, these are exactly what I needed and I have zero additional complaints. I would highly recommend, and, as I've already bought multiple of these, I think thats a testimony in itself.

I purchased the Huanuo Dual Monitor Stand for my Flexispot standing desk and it is easily one of the best upgrades i've made to my desk setup. The arms are smooth and easy to adjust making it effortless to position my monitors exactly where i want them. Installation was very easy with the clamps while they also provide the option to drill into the desk as well. I appreciate the fact that the monitor stand includes some type of cable management system which is very useful is hiding stray wires! Overall this product is great for the price, very durable, and is a very high quality product. I would definitely purchase again.

I don’t even have to say nothing because huanuo is a great brand and speaks volumes for itself but let me just say this I was mind blown such an amazing and sturdy product for the price I thought I’d get something that was difficult to set up which this is not it’s super easy and or made of cheap material which this also is not it’s great sturdy and even heavier which shows you it’s good material! This only thing I don’t like is the maneuverability of moving the monitor left and right as the bracket only allows foward and downward tilt but that is easy to get over you can use this for a top and bottom setup because of the way the arms are but this it perfect for side by side! The size is good doesn’t take up much desk space but creates a lot more since it keeps your monitors looking like they are floating it gives an amazing look to your setup that’s for sure!! The wire management is also pretty good and is easy to use making look nice and clean but if you have fatter cords I would just remove the plastic piece and screw and zip tie it tot he arm instead as i did for my main monitor!

This dual monitor mount works as advertised and when it says two 34 inch monitors it means 16:9 sized. I knew that when I bought it and even still it holds both my 21:9 ratio monitors great. One is a 34 inch Sceptre C34 and the other is a 27 inch discontinued LGb ultrawide. I have to rotate the LG into portrait orientation for them both to fit and I'll admit things are a little tight but I am still able to move the monitors for better viewing somewhat. These monitor mount arms are solid and of high quality materials. I recommend following the instructions and not making adjustments until the monitors are installed as they can whip upwards under the tension they have if you don't have the counterweight of the monitor. The adjustments that can be made to how hard or easy it is to move each part of the arm are a great feature. Except where the arms attach at the base where I haven't found any adjustment screw to be tightened. These arms don't move for me unless I move them but I wouldn't use them for mounting in a trailer or other mobile scenario as the resistance isn't very great. Edit: I was able to find the Alan type bolts for tightening down the swivel mounts. I still stand by not using this in a mobile to setting but I wanted to update this review to advise that they're kind of small and inset into the arm at the base and at the elbow. The whole thing did take me about 45 minutes to put together. This is mostly because I had to pull the monitors off the desk, remove the base stands and then wanted to run the cables through the cable guides on the arms. The guide on the upper arm uses only one screw and clips in on one side. It honestly feels a little flimsy but ultimately holds both the thick three prong PC power cable and the DisplayPort cable without bulging or warping. All in all this is a great option if you're looking to free up some desk space from the monitor stands or you need/want to be able to adjust your monitor orientation.

Only had it for 5 months but honestly good product I love having more room on my desk instead of my 2 monitors on my desk. I also love that I can move them around when needed. Its very secure and I haven't had any issues with that. Did take a bit to set up but other then that this was 100% worth it and suggest getting it if you can.

This dual monitor stand worked really well for my setup and was fairly easy to assemble. The instructions were clear enough that the whole installation only took a short time, and all the necessary mounting hardware was included. The build feels solid and stable, even with two monitors attached, and the gas-spring arms move smoothly without sagging. It is simple to adjust height, tilt, and rotation, so getting both screens aligned at a comfortable viewing angle is quick. The stand also helps keep the desk tidy, thanks to the built-in cable management and the way it frees up space under the monitors. Overall, it is a great value if you want a sturdy, flexible dual-monitor arm that is easy to put together and adjust.

I bought it in 2021 and I want to give a review after a year of using. I have read people issue and one thing I feel like they misunderstand the product is the arms keep falling down because of weight of monitor. I use two 27” MSI curve monitors and have no issue with it. I tighten the joint that closest to monitor using allen key provided (there are screw adjustment of tightness) and also every pivot point has screw adjustment and you can use allen key provided to tight it. I have not tried 32” monitor but I think this mount can handle the weight, maybe just one monitor as both 2 arms may not stretch out for the width of two 32” monitors. So, I recommend this product for two 27” monitors or smaller, if you need two monitors on this mount.

Ottima qualita' costruttiva, facile da montare, solido. Lo uso con 2 monitor Dell da 27" e le braccia reggono facilmente il peso. Vi sono molti prodotti simili tra cui scegliere non so se questo e' il migliore ma sono molto soddisfatto.

Brazo para soportar monitor excelente. Al principio la instalación es difícil si nunca has hecho una, pero después de leer un poco el manual y darle unos minutos puedes ser capaz de instalarlo completamente solo, me tomó al rededor de 2-3h porque nunca habia instalado algo similar. Pero una vez instalado, el soporte está increíble, la maniobrabilidad es más de la que pensé y libera MUCHISIMO espacio del escritorio, de verdad, muchísimo

Great dual monitor stand! Just be careful that your desk allows one of the two attachment methods. The three sided knob for tightening the clamp caught on part of my desk, meaning I could not easily tighten it on.