SmartStandard 30in x 84in Sliding Barn Wood Door Pre-Drilled Ready to Assemble, DIY Unfinished Solid Spruce Wood Panelled Slab, Interior Single Door Only, Natural, K-Frame (Fit 5FT Rail)

Love everything about this door kit! The wood is visually pleasing, and professionally crafted with tongue and groove slats and pre-drilled holes so it assembled with ease. We didn’t used the cross bar wood piece, and it seems fine. No warping!

Awesome looking just clear stain easy to assemble make sure to order right 2 size 36" doors won't cover 72 " closet space you will lose from overlap of brackets learned hard way but reordered 40" perfect love the look

I purchase 4 of these doors. For the money I think they will work out fine. Assembly time - 45 minutes each. Caulking, primer, sanding & 2 coats of paint - 2 hours If you use an impact gun BE careful not to strip out the holes. Screwing in to the end grain strips easy. Use a hand held screw driver to tighten the screws. Overall quality wood. I used wood glue at the joints.

very sturdy, high quality wood, beautiful design

Fantastic product. Great quality wood. Note: the dowels do not hold the heavier pieces in place, I had to add long screws to secure the sides from coming apart from top/bottom/middle thicker pieces.

This barn door was wonderful. It was packaged very well and easy to put together. We noticed that there was some spacing between the boards when we put it together. Although the directions said it was normal and the wood would expand as the days went on, we felt the spacing was too much so we added some double sided tape to the inside groove of one of the long outside board. You will see there is a foam piece in the groove already, so we just stuck a piece of tape to it. We didn't take the paper off the other side of the two sided tape and then we put the boards back together. It seemed to work beautifully and hopefully the boards don't expand. The wood did not have a lot of knots and we were hoping to stain it, but we felt it looked better painted in our room. It truly would have been a beautiful door if we had stained it too. We put the "K" frame on the bedroom side of the door, but left it off the bathroom side of the door. If we notice the boards start to "cup", we will install the "K" frame on the bathroom side as well. I have attached pictures from both the bedroom and bathroom side so you can see what it looks like. To finish the door, first I rolled a coat of primer on the door and followed it up with three coats of white semi-gloss with primer, so I'm hoping the knots don't ever come through. Our walls are painted Sherwin Williams, color number 0055, Light French Grey. We feel this was a great purchase and would highly recommend it.

Receive the doors when they said that they would be here made of solid wood, easy to understand instructions. Chuck me about 15 minutes to put them together. I ordered two doors first door went together.Beautifully second door I have four end panels, so I'm sure to middle panels. These are all channel and lock, which makes for very easy put together. But without these 2 middle panels I can't complete the door because it makes the end panel too wide So I need two middle panels to replace the two extra in panels

I initially considered crafting my own barn door, but after evaluating the costs of materials alone (excluding my time) the precut barn door kit emerged as the better option. The assembly process was surprisingly swift, taking 15-20 minutes to complete. The door's design features intuitive notches that ensure the pieces interlock seamlessly, secured firmly with screws. The central panels, also notched, slide in effortlessly without leaving any gaps, although ensuring good alignment and squareness helps with this. To conceal the screw holes, the kit includes pegs, and for those who prefer, decorative overlays can be added towards the end using the provided screws. One crucial tip: the door's bottom is pre-cut to accommodate a track guide, so it's important to position it on bottom during assembly. Keep in mind, the hardware for hanging the door is sold separately, necessitating drilling for the barn door rollers. My sole concern is the center panel's material, which is somewhat thinner and less resilient. You can feel it flex when you push on the door. It does its job but I could see kids rough housing and breaking the center section.

I was disappointed with the product due to the fact that it had to be totaly assembled, however when I submitted a review with that feedback, the Seller was immediately in contact with me and offered me a choice of solutions and turned the negative experience into a totally positive one. Totally awesome company to deal with for customer service! Wouldn't hesitate to deal with them again.