RGB LED Strip Lights Waterproof, 16.4ft 5M SMD 5050 300LEDs | Color Changing, Cuttable, Flexible LED Light Strip for Bedroom, TV Back Lighting, Christmas, Valentine's Day, Black PCB

I have ordered a lot of LED lights only to find out they are not the same as the pictures that you see when you are looking for LED lights that are of good quality and have a lot of lights per segment. I have found that most of the lights you are looking at and you will see a lot of lights in each segment so you order them only to find out the lights are not the same lights and there is very few lights in each segment. The LED lights you see are the lights you will get and they are good quality and I have not had any problems with the lights. I install the lights in a lot of fishing boats the lights work very good and last a long time, and in a marine environment in a boat that is a five star product. I see others have had some problems with the lights but think about it just for a second they come in a computer static electrically safe bag the lights are fragile when not wired up to the system controller just like any other low voltage computer parts. I am very happy to get the lights that I am pitched in the add and not a poor LED light set. I would recommend the LED lights, ( static electrical discharge will for sure damage the lights be sure to drain any static before you open the bag or work with the lights ) may not be the lights that are bad and wonder about the other bad reviews I have seen I have install over 87 sets in the past 3 years with no bad lights, so think and recommend using good computer repair parts handling skills to save yourself the headaches

This is definitely a good led strip. You can see the tightness of the leds they add to the strip. The colors are bright the response is fast. The instructions to the installation are well detailed and even include an adhesive promoter. Definitely worth the money.

Good value

4 stars, knocked one off for the lack of arrow pointing in the direction of polarity. Hooking them up incorrectly won't hurt them , but they won't light . To identify the polarity direction, look at the end of the tape. In order, you should see one resistor, then two resistors, then a cut mark. This is the IN direction.

The interior LED strips that I purchased for a car failed after less than a year. The kit included 4 LED strips, power supply, and Bluetooth controller. After less than a year the lights for the front had burnt-out LEDs in 4 spots on the strips which limited the lighting options to red and green, and anything containing blue would not light correctly creating a messy color effect. Rather than spending another $80-100 on a new kit I found these 12V replacement lights that matched what was supplied with the originals. Using some 4 pin 10mm LED strip to wired solderless adapters (purchased on Amazon) I successfully replaced the bad strips. These seem to be brighter and have more brilliant color than the originals.

The adhesive that they use is cheap and strip fell off in less than a day.

Get clips, because the adhesive on the back is not very good. Other than that, they are good.

They work great and are super bright installed them in a boat with a controller and soldered connectors.