LϟK 6 Pack Screen Protector Designed for Apple Watch 40mm Series 6 5 4 SE / 38mm Series 3 2, Max Coverage, Bubble Free Flexible Soft TPU for iWatch 40mm 38mm

Seriously, this is the best Apple Watch screen protector I have tried out of three different brands. I am very picky about how I want my watch to look and a trend I noticed with previous brands was that the protector would make the watch look very cheap and bulky and that was a huge disappointment for me. After returning the previous brands, I ordered this protector and I am so happy that I did. This screen protector was extremely easy to install and went on without any issues, air bubbles, or scratches to the device or to the protector. I have had it on for a bit more than 24 hours now and the edges are still perfectly adhered to the watch face and I cannot see any scratches yet. The screen protector is extremely thin which is what I like most because once its on, you seriously cannot tell that it is on. If it weren't for the tiny lip of the screen protector, I wouldn't be convinced that there was even a screen protector on the watch. Here are some pros and cons that I have noticed within the first 24 hours of using the protector: Pros: -Very thin and almost impossible to see on the watch -Very easy to install with no air bubbles or scratches -You get a pack of 6 which should last for quite a while if you are careful with how you treat your watch -You get a free watch band with these screen protectors Cons: -There is a line down the middle of the screen protector that can only be seen in direct sunlight and in some very bright indoor lighting. This is virtually unnoticeable unless the watch is off and you are looking at it in direct light. I think this line comes from the way you have to fold the screen protector in order to adhere it properly. (this can be seen in the first picture) -This protector is very thin and although that is also a pro, I am not sure how long it will hold up due to the thinness of it. Overall, I am very happy with my decision to purchase these protectors over the other brands I tried. It is by far the most clear, the easiest to install, and seems like it will hold up well. I have not used it long enough to determine how much it will hold up to every day use of the watch so I will update after a while.

I am traditionally a Zaag aficionado, and for my iPhone and iPad I will not use another product. However for my Apple Watch I found their products difficult to install perfectly and very bulky. I searched the web for an option and found the LK Screen protector, I was concerned with the cheap price but found out I was wrong. I give my watch a very sound pounding daily with workouts and doing general construction work. The protector has worked perfectly, the only time I had to replace it was when I accidentally fell onto a concrete wall and the rough surface ripped a section of the film off the watch. The watch underneath was completely intact and all I had to do was replace the screen in minutes and I was off to the races. Installation if you follow the video that comes with it is seamless, no bubbles either time I have done it and the equipment the box comes with makes the job very easy. The touch screen I have no issues with responsiveness and the only thing I have outstanding is to see how it handles swimming in the pool, with covid this year I have been unable to do this, but I can tell you daily hand washing and showering produce no issues. From my experience with screen protectors this is one of the best I have found for ease of installation, durability and price. I have used the screen protectors now continuously for 4 months.

Update post: 10/30/20 These screen protectors are the best I have used! 6 to a box and the price point is great and they last a super long time! The first box I wasted two because I was getting frustrated at the bubbles and now I know if you follow the instructions and apply correctly, the bubbles will go away after a few days. I am currently on my second box and have only used one out of it. They typically last around 3-4 months before I change them due to normal wear and tear. It’s inevitable that you are going to bang and hit your watch because life happens! But the edges have yet to curl on any of them! They will get scuffed and scratched, which is a good thing because it’s not the actual glass taking the brunt! I personally change them out for mostly cosmetic and personal preference. I could see them lasting 6mos if you don’t mind the scuffs and scrapes. These are great and almost completely unnoticeable. ***EDIT*** I originally noted that there were a few bubbles that would not squeegee out but after a few days the bubbles are gone! I’m actually surprised, but pleasantly surprised! So far it is holding up and there is no curling of the edges or crazy waves. Unless I told you, you would never know it’s on there. It’s smooth, and looks just like the glass! I really hope it holds up over a longer period of time! These are fairly easy to apply and I did take the advice from other reviewers and watched the application video first....I highly recommend watching the video because there is a lot of steps to go through. They do seem to be smoother and adhere better than the brand I previously bought for my old watch and you do not have to keep the surface wet to apply these. My only complaint is that I had to waste 2 because the bubbles would not squeegee out despite following the instructions exactly and therefore it gave an ugly appearance and as anyone knows if you’ve had experience putting these on, you can only move it around and take it off and reposition it so many times before it becomes stretched out and unusable! Thankfully on the 3rd try I was able to get an almost perfect application but there are a few stubborn bubbles I can not get out, as you can see in the picture, but I guess nothing’s perfect and is definitely better than having no protection! I highly suggest getting a screen protector like this to save your watch face, especially if you’re like me and don’t really care for the cases. I can’t give a rating for durability as I’ve only had it on a short time.

So easy to adhere! Stays put and protects my watch.

This will be the longest screen protector review ever so I will divide it in sections so you can skip to what interests you. About me: I’ve been using PDAs and mobile computing since ~1999 and learned the importance of screen protection early on with one of my Palms. I worked in an environment with air and waterborne abrasives and screens would get ruined. My wife and children use mobile devices and I have applied hundreds of screen protectors for our family and friends. Apple Watch screen protection: The problem is the curves. Despite using some kind of miracle glass the Apple Watch gets scratched pretty easily. My wife works in an office and when we got ours I trusted that there would be no way she would need a screen protecor. Boy was I wrong! I looked at hers after a couple months and it already had some nicks and abrasions. So now everyone is on the screen protector schedule. We started with the model 3 and then gifted ours to our 2 children when the Model 4 was released so I’ve been keeping up with four of them. I have used many screen protectors and all of them “work”, but the only *problem* is that the edges will come up with the brush of a sleeve or any other friction along the edge. Always, without fail. If you can remain aware of that failing there are ways of preventing the peel, but that means living with yet another worry. I’ve managed a couple months without the peel, but it eventually shows up. Why do they peel? Probably because of low-tac adhesive and the other ones I’ve tried are thicker. That thickness gives them a bigger edge to grab and are harder to hold down on the curved section. *(I used some glass protectors with curved edges and couldn’t get a bubble-free installation) Installation: I’m not sure if alcohol will sufficiently remove all oils so I cleaned mine with a very diluted Dawn/water solution followed by a water rinse, then alcohol wipe. Shining a flashlight across the surface of the Watch will reveal any dust that doesn’t show up with perpendicular lighting. I watched the video twice and followed the application instructions exactly, (except for my additional cleaning step), and the first protector went on perfectly. It was ready instantly, no overnight curing time or incessantly keeping up with the sides and corners wanting to lift up until “cured”. Screen protectors - The Hidden Cost: The Watch is sold with fanfare regarding their special glass formulation to keep it scratch-free. If you are lucky enough to live a life surrounded by soft things and never get out in the real world then that may be enough. It wasn’t for me, my wife, or my children. So we buy screen protectors. I was going to include a list of the various protectors I’ve purchased, but it is embarrassing. Some lasted longer than others but in the end they all died of the dreaded Peel. Some lasted longer than others, but results varied even within protectors from the same package. I try to reduce variables by having a consistent application method but nothing can stop the inevitable peel. I’ve used BestSkinsEver protectors on devices in the past with great results before the tempered glass protector revolution but even they failed on the Watch. Additionally; people have different skill levels and dexterity so applying these finicky things can often end in failure. This application system greatly reduces failure if you follow the instructions. Another “cost” is application time. With the other protectors I have to wait until the end of the day and spend time applying and tending to the watches. With my very first installation of these I was done in under 10 minutes and popped the Watch back on my arm. Subsequent applications should be under 5 minutes. Conclusion: These may eventually peel off like all the rest, I will update accordingly. But even if they do I will continue to use them because they are the best of the MANY screen protectors I’ve used if only for the ease of installation. I am confident these will greatly reduce “The Peel”, but time will tell. Because these are noticeably thinner than all of the others I’ve tried it’s hard to tell that there’s even a screen protector on the Watch! Sensitivity is fine, nothing weird about the surface, I am so happy to have finally found these because it’s been a pain in the neck keeping up with these darn things. Even if they only last as long as the others the cost is about the same but installation is a breeze. I will definitely update as time goes by. For the record: I have no affiliation with this company and receive no compensation or benefit of any kind for this positive review. I am writing in an effort to share my experience with this frustrating aspect of Apple Watch ownership. Update 04/02/2020 - It's been a little over a month and I think I'm gonna put on a new one. I could probably get another month out of this one but it's getting chewed up. I work machine maintenance and am always scraping my watch across something. It's held up admirably and even a section on the side that I've scraped and lifted doesn't want to pop up like the thicker screen protectors do. My wife's looks as good as new, this may be a record!

For starters, I watched the installation video before even starting. Then I followed the video step by step, with somewhat mixed results: The rings are very helpful, which keep the Apple Watch in place during installation. Although I did notice some stickum on the back of my mother’s Apple Watch after installation. So I used the included alcohol pad to clean it, then dried it with the (also included) dust cloth. As for the installation itself, unfortunately on my first try, the #2 tab actually separated from the piece it’s supposed to lift off, so I had to abandon that screen protector and start over. Also as one previous reviewer had pointed out, there can be a line right in the middle of the screen protector once installed, the line where the #2 and #3 peel-off pieces meet. Consequently I had to remove the second screen protector and install a third one – when I managed to get rid of the aforementioned line by lifting the part under the (already removed) #2, while using the squeegee to remove #3. SO... I ended up using 3 screen protectors to get 1 good installation. Then I proceeded to install on my mother’s brand-new Series 5 AW. And having learned the lessons from installing on my own Series 4, you’d think I’d get it on first try. Alas no such luck. I also ended up using all 3 of the remaining protectors, before getting an acceptable result. (I even used a magnifying lamp this time!) Even then there are still tiny air bubbles once installed – which my Lasik eyes can see, but which I really don't think would make much if any difference to my elderly mother! UPDATE 22 February 2020: The screen protector started falling off my AW all by itself last night, even though I haven’t done anything ‘unusual’ with my AW – no swimming, no taking a shower, not scraping it against anything... I used the Apple Pay on my AW three times last night, and by the 3rd time the screen protector curled up in one corner and is now totally unusable. (Please see photo) Since I had already used up all 6 protectors for 2 AWs, I’ll have to look for an alternative. I just hope my mother’s brand-new AW is still protected – which I gave her as a surprise present only 2 days ago!!!

I had some difficulty applying it even after following the instructional video. I kept getting bubbles in the middle of the screen. I’m very good at installing screen protectors and rarely get bubbles on phones, tablets, etc, but this one was a different story. After my 4th attempt and 3 wasted screen protectors, I finally was able to get one looking decent. Honestly, it’s the installation process. I feel it would go on better if the screen was applied in one shot and not half and half. Watch the video and you’ll understand what I mean. Basically, you stick on half of it then lift it a a little and stick on the other half. They have a plastic backing that is split in the middle and designed to apply the screen in a 2 step process - half first then the other half after. I bought this since it was recommended to me when buying the Spigen Rugged Armor case/band for the series 5 44mm Apple Watch. DO NOT BUY THIS IF YOU ARE GOING TO USE THAT BAND. This is not compatible with the Spigen Rugged Armor band/case. The protector covers a large area of the screen, and the case will press on the edges and lift the protector off of the watch face. All in all, wasted money. I’m sure others have had better luck with it, but I can not recommend it based on my experience.

Update after 6 months: this product is great and is truly self healing. I let my 9 year son wear my watch and he banged the watch face on something which created an air bubble. After a few rubs over the bubble with my finger it looked good as new. I added a before and after photo to show what it looks like right after you put on the screen protector. It will take 1 day to even a full week for all the air bubbles to go away. Once the bubbles are gone, it looks fantastic. Update: after 3 days all of the bubbles completely went away, even the small one that I circled in the photo is gone. ————————- I bought this product after having a terrible experience with the screen protectors that require a spray. The spray one just did not work for me and the edges kept coming up. I returned that one and came across this item. Make sure to watch the video to help with installation, the sticky foam holder really does help. The first one I installed following the exact instructions from the video and there were tons of bubbles and a line across the middle. I was so bummed and assumed that I did something wrong so I took it off and put on a second screen protector. The second time around, I did not bother following their instructions exactly. I just took off all the layers and placed it directly onto the watch screen (I do this with phone screen protectors all the time). It had the same result, bubbles all over and a line! I figured the product was defective and bad but because I had no other screen protection I decided to leave it on until I could find a new one to purchase. The next morning I put on my watch and noticed that 90% of the bubbles were gone! The instructions fail to highlight a key point: LEAVE THE SCREEN PROTECTOR ON OVERNIGHT OR LONGER to allow for the bubbles and line to disappear. Mine all went away on its own. Right now there is only one small bubble in the corner which I believe should go away on it's own in another couple of days. The reason why I’m giving this item 4 stars instead of 5 is because not all of the screen is protected. It covers less than the spray one. If only they could re-evaluate their product measurements so that it could provide true edge to edge coverage then this would be 5 stars.

Ottima pellicola, semplice da applicare e una volta messa sembra invisibile talmente aderisce bene al quadrante dell’orologio. Sono rimasto veramente soddisfatto

Super Schutzfolie! Passt perfekt und stört nicht beim touch.

Effective product and good value for money, barley visible on the screen but give good protection. Doesn’t impede on clarity or touch sensitivity. I have a series 7 and it fits very well and is easy to install especially thanks to the little rubber stand they supply. Find myself going back to this product every time.

After receiving a replacement watch from Apple due to a fault with the screen, I have decided buy a screen protector as my previous watch had developed scratches after a couple of months of normal use. This screen protector is excellent and it is almost invisible when applied properly. The installation process is explained on YouTube which makes it as simple as possible to understand. I had concerns for the quality of the product, however after buying it and trying it out for myself, I was impressed as the screen protector almost merges with the screen. I did not want to have a case for the watch as they look extremely ugly, so this was a perfect solution. There is a slight increase in reflectiveness of the display after application, which for me is not a bad trade off.

i was doubtfull when i first bought this product but after several month of use i can say it's a must for apple watch owner: -easy to install -barely noticable when installed -protects really well againts scratches, chocs, ... -print resistant -real "self healing capacity" -several screen protector in the box i have seen reviews stating that the screen needed to be changed regularly, it's been 3 months (every day use) and i still haven't felt the need to change the first screen (and still looks pristene). my only "complaints" would be that it took me a while before getting used to the feel of the film.