20-pin Headunit/Radio Wiring Harness with Steering Wheel Switch Wires Compatible with Subaru/2007-2019 Nissan | Upgraded Version of The 70-7552 | Harness Includes VSS and SWC pins

All wires were easy to read and matched right up with the wires from the new head unit. Steering wheel controls even worked without the extra module !! Just had to tell the head unit which buttons on the wheel do what & it works flawlessly !

Fits perfect and I was pleasantly surprised when I noticed that the wires have labels printed on them(even if they are hard to see). This harness makes installing a SWC interface a breeze.

If you are looking to install a new stereo in a Subaru Outback 2011 and retain the steering wheel controls this product will work. You will need to pay special attention to the wires however. The steering wheel pins for this wiring harness do not quite match up to the Subaru Outback. One of the pins that's supposed to go to the steering wheel control is marked and patched as a dual ground wire on this harness. It's not an issue, just something to look out for. In my case I just covered one of the spilt ground wires with heat shrink tubing and patched the steering wheel control wire to the other wire labeled for ground. It works and you will certainly want to pay attention to the the pins from your vehicle to this harness. Otherwise this product was great, all the other cables were easy to match up to the stereo and my vehicle.

This is the harness you want. I used it in a 2008 Subaru Impreza and it had all of the extra stuff needed for steering wheel controls and the antenna amp.

Worked great. Had to look at the amazon description to make sure I had the wires right for the ones that were not individually wired.

I bought this wire harness once and saved it to my buy later. The first one I received worked get everything fit and then I bought a new stereo so I decided to buy a new harness well this one which was supposed to be the exact as the one I ordered before did not work and I even checked the product details before writing this review and what I received and what it says I bought were 2 different products!

This was worth the extra couple bucks to keep the steering wheel controls. Just hooked up the two switch wires and programmed it in the radio and everything works great.

did not work for 2022 kicks..

Exactly what it says in the description. An upgraded version of the Metra 70-7552 which Metra only lists for Nissan, but it's used by many Subaru models without Nav (the Metra harness for Subaru is with Nav). It includes all the extra wires for steering wheel controls and speed sensors that the Metra harness is missing.

Lo usé en un Sentra 2019 y quedó perfecto, mandos al volante e iluminación sin problema, la calidad excelente, lo recomiendo.

All the people complaining about this product... First, you shouldn't need instructions. Each wire is labelled ON each wire describing what it does. Second, there will be wires you may not be using. For example if you don't have a power antenna, or forget to get your steering wheel control interface box. Second, the wires are colour coded, they typically match a standard aftermarket radio harness. Connect the blue wire with the black stripe to the radio harness wire that is blue with a black stripe. If you are still unsure, you can search Metra for the schematic. Works fine. And thirdly, this is for multiple vehicles from two different manufacturers, is not specific to you car. There will be a few wires you're not going to use.

Works fine with basic power and speaker leads. Illumination, steering wheel control may or may not be supported, not on my base Nissan 370z install- created extra wire clutter. Colour coding was ok.

Les couleurs de fils ne sont pas exactement les mêmes que celles de l’auto, mais c’est assez simple à l’aide d’internet de trouver le shéma de la radio de l’auto.