Bosh Chemical Alumabright Aluminum Cleaner & Brightener & Restorer (2 Gallon Case)

This stuff I put in 1 gallon sprayer . sprayed side of pontoon.Then scrubbed with light mop . Spayed again then rinsed off. The pontoon had never been this shiny since buying boat . Easy to work with . And the result was better than expected. Will definitely use again. Well worth the price.

Worked good. Had to run it pretty concentrated but it got pontoon tubes from 2021 back to new again.

These are Alcoa aluminum wheels off my Ford F450. These were on the front of the truck. When I went to rotate the tires and saw the inside my OCD kicked in. I tried a few other aluminum mag wheel products to clean them. Nothing I tried made any improvement. I also tried a buffer to no avail.With this heavy build up, this product was not spray on and hose off. The wheel on the right was treated 3 times and nylon brushed. I am very happy with the results. I used a quart of material between the 2 wheels. A gallon let alone 2 that I bought will last a very long time in my case.Some warnings, wear gloves and eye protection. This will etch the aluminum if left on too long. Rinse really well and the ground around where you are working. The face (other side) of the wheel streaked, It polished up but be careful. This product also discolored the rubber on the tires. I used tire black to bring the color back. This will also discolor your driveway, it is best to soak the driveway or where you will be working to avoid discoloration.Closing comments, I would bet the base of this product is muriatic acid. Perhaps there are other additives... Either way the product worked very well for me and what I was looking for.

I love this stuff, it works great on chrome as long as you fallow the directions

Works good on pontoons

Alum Bright works great on my 26-year-old boat! My pontoon stays on the water about 5 months out of the year. In the past cleaning the toons were very time consuming, but with Alum Bright makes things a lot easier.Here’s how I use it. 1. I power wash my toons off as good as possible. 2. I apply alum bright with a hand spray bottle. Doing one side at a time I let it sit on for about 5-10 minutes. I try to pay attention to see if the acid is still working. 3. Rinse with power washer. Then reapply 2 - 3 times. As you go, I focus of the stubborn areas. But before you know it, it’s clean in very little time. My 25-foot boat takes me about 1 1/2. With no scrubbing.

Works great! I mixed 50/50 sprayed on and used a stiff brush & scouring pad for the water line stain. It did have some streaking but I sprayed on 3 or 4 times and used scouring pad on streaks, each time reduced the streaking. I did the whole boat and only used 1.5 gals water/Alumabright.

Easy to use shine is nit shiny till u polish it does clean aluminum great but careful as it is a acid