J-Tech Digital Premium Quality 4K@30Hz HDMI to HDMI + Audio (SPDIF + RCA Stereo) Audio Extractor Converter (JTDAT5CH)

I'm using this device to get TV Audio to my SONOS PLAYBAR, and my review focuses on this application.Many folks have written about problems in getting Dolby Digital or ANY sound from their TV when connecting the TV's optical out to the PLAYBAR. Some TV's have no optical out, some have no sound from their optical out when using an HDMI source, and some others send only stereo to the optical out. See this link for a list of TVs and their level of Playbar compatibility:sonos.custhelp.com/app/answers/detail/a_id/1931/~/television-compatibility-with-the-playbarA very simple, fairly inexpensive solution to such problems when setting up a Playbar, and one which has been working extremely well for me, is this J-Tech HDMI Audio extractor combined with a vanilla hdmi switch. (monoprice has a 4x1 hdmi switch for $24 OR an 8x1 switch for $79, and amazon has some good alternatives as well),Note that this solution will work even for TVs which are said to be incompatible at the Sonos link above, including those for which Sonos says there's no workaround. My TV is one of those. It's a pioneer elite, and I've yet to find one I'd want to replace it with. But my Sonos, Elite and JTech are working perfectly together, since an HDMI audio extractor (such as this JTech) completely eliminates the need for the TV's digital audio output port.This solution is ideal for folks, like myself, who are already using an HDMI switch or an hdmi switching AV Receiver (in these cases you'd only need to buy this J-Tech extractor), but even if you have to buy an HMDI switch, this approach has some advantages over an integrated hdmi/optical switch: It works for sources that have no digital audio output ports (ie, for sources that send audio only thru their hdmi ports, such as the Roku3); It's easier to find a switch handling ANY number of sources or matrix switching; It's less expensive; And you need to run only 1 cable (just an hdmi cable) from your equipment location to the TV location. Also note that, using a standalone switch, rather than TV switching, makes it much easier to add more sources at any time in the future, especially when you have cables behind walls or under the floor, or when you want to add more sources than the TV can handle.Here's how you set it up:- Plug your switcher's HDMI-out cable into the JTech's HDMI-in port (instead of the TV).- Connect a second HDMI cable from the JTech's HDMI-out to your TV's HMDI-in.- Connect the JTech's optical out to the Playbar.- Choose Digital Out on the JTech and you're done.(You'd locate the JTech near the TV and Playbar, avoiding the need to run the optical cable from the switch, or equipment location, to the tv location)I'm getting dolby digital whenever my source has dolby digital, and stereo whenever my source has stereo. My picture quality and audio are excellent, and video audio sync is perfect. No problems of any kind.(Note however that, as with every other device I've seen, this unit does not convert dolby digital plus to either vanilla DD or to stereo for the digital out. If you're getting DD+ you'd have to switch that off at the source. An example of this is Netflix whose surround sound is DD+ on Roku. Because of that, I have Roku set up to give me stereo from Netflix and DD 5.1 from Amazon. )Hope this helps

I have been using this over a year without issues and with excellent performance.I wanted to be able to use my Xbox One in both my living room and my basement home theater room simultaneously and get the benefit of Cable TV integration from my Xbox One in my home theater as well as my living room. With the wireless controllers and the Xbox phone app, I would have full control over my xbox and cable TV set top box from my home theater via WIFI as if I was in the living room. This box, plus 2, 25 foot HDMI cables and an HDMI Splitter, enabled me to do this. All in it was about $85 to make it all work. Great deal!I have an XBox One in my living room hooked up to my Cable box via the HDMI input, an Onkyo 5.1 surround sound center connected via SPDIF and my 60 inch TV via HDMI out through an HDMI Splitter. The HDMI Splitter has two outputs and is located right behind my Xbox one in my entertainment center cabinet. One output goes to the TV and one to my J-Tech Digital HDMI 1080P HDMI to HDMI + SPDIF Audio Extractor via a 25 foot HDMI cable that goes down through the wall, through the basement ceiling to my entertainment center cabinet in my home theater. Then from the J-Tech device to a ceiling mounted 1080P Epson Projector with 120 inch screen via another 25 foot HDMI in my Basement below my living room. The SPDIF output from the J-Tech then connects to a 7.1 Onkyo receiver via SPDIF.The end result is that I get a duplicate 1080P video signal plus digital audio to both my living room and my basement home theater without loss of quality of video signal or sound quality with a combined HDMI run distance of 50 feet, having the JTech device in the middle. I actually can play games, watch Blu-rays, Cable TV in 1080P HD, and use all the Xbox One streaming apps, with full Dolby Digital 5.1 surround sound in my living room and DTS 7.1 (or Dolby digital depending on the Xbox One source app) in my basement simultaneously. I expected to get the same video and audio for both, but with the XBox I can choose to send audio signals in different standards to the SPDIF out in my living room and via HDMI to the JTech device in my Home Theater. I was pleasantly surprised this worked, instead of just have two 5.1 signals.One note, I had to set my Xbox One to output uncompressed audio digital signal through the HDMI port so that the JTech could pass that to my downstairs receiver at full fidelity and let the receiver decode it as needed.This has worked beyond my expectations and has been working perfectly for a year. I have even considered getting another one or two of these, and a 4 way HDMI splitter to replicate this to my bedroom and my back porch, both of which have their own audio systems. Only issue would be run length to those rooms would be longer than 25 feet and I would need some boosters for HDMI. I probably will do it eventually now that I have confidence in this device.

This review receives 5 Stars because I was able to utilize the RCA stereo output to supply my Sennheiser audio headset with a usable signal and that is why I bought the "box". I received the J-Tech Digital Premium Quality HDMI 2.1CH/5.1CH Audio Extractor, Model JTDAT5CH/JTD-ID:80 in a soft side mailing envelope along with two HDMI cables I ordered to connect the "box" with. Connecting was simple with the Roku Ultra HDMI output, connecting the Roku out to the "box" in, "box" out to my Onkyo AV receiver, Streaming Box HDMI #3 connection in. The "box" RCA connections were made from the "box" to the AV Analog In #4 RCA in connections. I plugged in the "box" power supply into an electrical outlet, then plugged in the power supply connection into the "box" power supply. The red light on the "box" turned on. I then selected ROKU on the AV receiver, which already was set up to "turn on" the system (TV, AV Rec, Roku) to view audio/video from the Roku through the AV receiver and on to the TV. I confirmed that audio was normal through the AV receiver out to the speakers as usual. The video came on at the TV as usual. I turned on the Sennheiser headset, put it on and did not hear any audio. I selected on the AV receiver the Satellite reception and sound came through the AV receiver system and also into my headset - normal. I reselected Roku and within a couple of seconds, audio and video from the Roku came on through the AV receiver but not through the headset. I tell you all this just to remind you to make sure you understand how a AV receiver works. I should have thought about this prior to connecting the "box". My Onkyo has Zone 2 and that is what outputs audio to my headset. I had failed to understand and set up Zone 2 for my Roku. I went into the Setup of the Onkyo, went into Input/Output menu and selected Analog output to the proper output to match the HDMI input - Streaming Box #3 HDMI with Analog #4 output. I then selected Zone 2 to Streaming Box and sound turned on in my headset. So, the box worked. Then, I checked the position of the switch, Bypass, 2CH Stereo, 5.1CH and it was selected to 5.1CH. I thought that can't be, RCA outputting 5.1?? I selected 2CH stereo and both the audio and video turned off. After a couple of seconds, both the audio and video came back on. Video looked good but audio seemed the same as before but what could I tell - I was listening to 2 channel stereo - I think. I selected Bypass on the switch and the audio/video turned off and after a couple of seconds came back on. Video seemed the same, audio also. No matter where I put the switch it seemed that nothing changed on audio or video. I left the switch in Bypass, headset playing audio and the AV receiver providing sound and the TV playing video. Well, okay I get what I want - audio through the headset and Roku seems to be good. And, I learned some more about my Onkyo AV receiver. The "box" and cables were delivered within the two days provided by Prime, in a large padded envelope, in a new package and I used the two new 18" HDMI cables to plug in the "box". I recommend buying the "box" because it gives me headset audio and still allows audio to be passed on to the AV receiver as though nothing changed. One thing I have not done is to check the audio programming when streaming a movie from either Netflix or Amazon through the "box" to check the AV receiver decoding Dolby. If that works I will not be updating this review. If it doesn't work - I will update the review to provide those comments. Good Luck - the box seems to be "plug -n-play".

Here is my usage scenario:-Original setup of equipment: Roku via HDMI to 2009 model Panasonic plasma TV. TV to Sony receiver capable of decoding up to 5.1 Dolby or DTS audio, via optical cable.-Roku reports best available audio is PCM stereo, and that's what comes out of the receiver.-New setup of equipment: Roku via HDMI to extractor. Switch on extractor set to 5.1. Extractor to TV via HDMI. Extractor to receiver via optical cable.-Roku reports all surround options now available: Dolby Digital/Digital Plus, and DTS. I can select Auto/Dolby/DTS for streaming format, and can further select Auto/Dolby Digital/Dolby Digital Plus/DTS for surround format.-Trying all combinations in the two menus (excluding DD+ because it is known only formats up to 5.1 are supported via optical), the receiver does not see anything better than two channel PCM. The decoding light on the receiver does not illuminate, implying that the Roku is falling back to a "best available" scenario and delivering straight stereo.-Apps tried: Netflix, Disney Plus, Paramount Plus-Second setup of equipment: Fire TV Stick Lite via HDMI to 2009 model Panasonic plasma TV. TV to Sony receiver capable of decoding up to 5.1 Dolby or DTS audio, via optical cable.(I'm trying the Fire TV because another review said it worked)-Fire TV reports best available audio is PCM stereo, and that's what comes out of the receiver.-New setup of equipment: Fire TV via HDMI to extractor. Switch on extractor set to 5.1. Extractor to TV via HDMI. Extractor to receiver via optical cable.-Fire TV audio options now report Passthrough Dolby Digital Plus and Dolby Digital as options. I select Dolby Digital, because it is known that DD+ or formats with more than 5.1 channels of info will not work.-Only HBO Max illuminates the decoding light on my receiver, indicating 5.1 channel audio is indeed being passed through. Other apps tried (Netflix, Prime Video) result in PCM stereo being delivered.Here is the deal: If you're using this with a streaming device, it's down to the apps on that device as to whether you'll get 5.1 audio from this extractor. It's also likely that current generation streamers like the Roku and Fire TV I have do not have the ability to downmix multi-channel content greater than 5.1 channels into anything but stereo. I reckon that's one reason why they are so cheap. I don't know if HBO Max is "limited" and only delivers 5.1 audio and that's why it worked...or whether HBO Max senses the device it's delivering content to and adjusts the audio track accordingly. (I think it's the former) But it's clear to me the vast majority of streaming apps have moved on to Dolby Digital Plus or other formats that carry more than 5.1 channels, even if the content doesn't natively have that many channels. Because of that, this device, limited by its optical out jack, is not fit for (my) purpose.Your mileage may vary, but I seriously doubt it.This box can solve some connection issues that I have encountered. For instance, I have computer monitors that have HDMI in, but no audio out provision. Using this box, those monitors could be used as TVs for streaming devices, with sound bars or speakers hooked up to the L/R jacks or even the optical jack.The device is cheap, and it is well constructed, but it doesn't deliver fully on its promises...at least, not anymore. When it was introduced, it was probably very useful, but streaming app technology has left it behind. So on my main rig with the Sony receiver, I will continue using Pro Logic II, to get more out of those two channel audio signals I'm limited to.

Works as advertised. I needed to extract the audio from my fire stick that is connected to my Receiver that sends the the video to my projector and the sound to my speakers. Now the audio from the extractor goes to a Bluetooth Starlink transmitter to my Starkey earing aids so I can hear clear dialog. By the way Starkey earing aides Bluetooth only works with Starlink transmitter. I tried other ways. like Bluetooth headphones. but they ware to heavy an uncomfortable. So. Now I still can hear my speakers by raising the volume on my receiver or through my earing aides by lowering the volume on the receiver. if you use this set up you have to change the setting on the fire stick to PCM.

Pro: In my (admittedly limited use), this device does its task (copying an HDMI audio stream to a TOSLINK/SPDIF cable) as well as one could ask for, so I gave it 5 stars.Con: It really wasn't a full solution for what I was trying to do. (To be clear, this is not the fault of the device.)Bottom Line: This is a fine device, it just can't magically transcend the inherent limitations of the TOSLINK/SPDIF cable. It can take a lot of research to know if that is going to keep it from meeting your requirements or not.I was aiming to have this device feed audio from a Fire Stick to an older receiver (that lacks HDMI connectors) via a TOSLINK/SPDIF cable and get surround sound. Very early signs were promising, but Disney Plus was a huge problem. Specifically, Disney Plus only provides surround sound in Dolby Digital Plus format, which requires more bandwidth than a TOSLINK/SPDIF cable can provide. Thus, if I had things configured for surround, I got zero output. (This device does not down-mix into another receiver-supported format, and it'd not reasonable to expect it to, given its price.)The primary lesson here is that you can't just ask what the source hardware is going to do, but rather what all the apps on the source hardware will do. With some configuration on the Fire Stick (Settings=>Display & Sounds=>Audio=>Dolby Digital Output=>Turn Dolby Digital Plus Off), Prime Video on the Fire Stick does seem to provide 5.1 sound. (To be fair, I haven't tested this too much.) However, Disney Plus doesn't appear to honor this setting, which means other apps might not, either.To get sound with Disney Plus, we have to configure the Fire Stick for Stereo--a setting that Disney Plus *does* honor. However, this means Prime Video also plays in stereo, unless you change the setting for the relevant streaming app each time. This wasn't an attractive solution, so I stuck with stereo and have recently started shopping a newer receive.rOther streaming apps may offer some of the same headaches. I suspect that most will be better behaved than Disney Plus in this regard, but I wouldn't hang my hat on that if I were reading this review.While my experience involves a Fire Stick, some of the same concerns may come up if you try to use the streaming apps on a "smart" Blu Ray player.If you're content with only stereo, you can probably get this device to work reliably for you. Outside of that, some research is probably smart to make sure this will meet your needs.This *might* work pretty well with my receiver if the concern was an HDMI-only Blu Ray player without any streaming apps (perhaps with some one-time configuration). BluRay dics must have a primary audio track in Dolby Digital, DTS, or LPCM. The first two options both work with TOSLINK and are supported by my receiver. For LPCM, the TOSLINK cable would only support stereo, however.From my reading, the following audio formats require more bandwidth than a TOSLINK/SPDIF cable can provide and WILL NOT WORK with this device:Dolby Digital PlusDolby TrueHDDolby AtmosDTS HD High ResolutionDTS HD Master AudioAgain, this is a fine device, it just can't magically transcend the inherent limitations of the TOSLINK/SPDIF cable.

Was very excited to get this extractor to work with an older 5.1 DTS amplifier. I am looking to revive my surround sound system and based on the reviews it looked like a great cost effective solution. Connected to a Roku Ultra and optical cable to the home theater system. Video seems perfect with the HDMI, no issues, plug and play, good picture and sound using the tv speakers. Simple, straightforward setup.The Audio out has been the opposite and nothing but problems. Started a movie, as soon as my amplifier detects and switches to DTS, the audio cuts off completely, no sound and can't get it back. Have it sent on 5.1. and tried all the settings. Sometimes it detects DTS and sometimes it doesn't, even on the same movie, but always drops the audio every time the amp changes modes (stereo, prologic or DTS). The audio drops from both the amp as well as the TV, so I know the problem is coming from the extractor. Played around with this for a while trying to trouble shoot but no luck.I'll give tech support a chance tomorrow but this will likely be getting returned. Will post an update if I can get it working.Update; I was able to confirm that Netflix and Amazon prime use DD+ audio format, via the Roku. DD+ is not compatible with the optical output cable used in my setup, only an HDMI cable will work with this. This might explain the problems that I had. Regardless I had to return this device as it would not work for my current setup. My current AVR supports DD and DTS 5.1, but not DD+, so the only practical solution would be to get a new AVR. Chasing technology get expensive and frustrating. I'll live with what I have for now. As I see it this extractor device is basically outdated and does not have practical use as not too much is output in DD or DTS format anymore, unless you are using DVDs.

The product ended up working ok, it is a bit fussy about the hdmi that it is hooked to. BUT...tech support is totally unavailable, in fact, the company phone system, takes your number, then calls back and tells you they are too busy to call back. We ended up having to find an alternative to these for our project, then mess with them later. like i said, the devices are "fine" the tech support is useless, they will certainly not be there when you need them. hopefully you have engineers around to figure things out for your self

Everything nicely work as describing by j teck.

Great product. Does exactly what is needed. Hooked up a projector and external speakers. Worked perfectly.

Funciona excelente, sin ningún retraso, no se calienta como otros, lo tengo conectado a un Chromecast 3ra generación, sin ningún problema, J-Tech, como es de esperarse, te lo presenta en buen empaque, instructivo y lo mejor, ya con fuente de alimentación incluida. Tuve una mala experiencia con otro aparato similar que también se vende acá por Amazon, funcionaba cuando quería, y calentaba mi Chromecast.

it does what it says but unfortunately with my chromecast connected it wouldnt allow me to control the volume