Instant Smile Comfort Fit Flex Natural Shade

Okay, so.... while I have yet to perfect my "teeth", I wanted to write this preliminary review as a PSA for those really desperate to reap the benefits of a product such as this, because I really don't want y'all to miss out. That being said, as a get of the other reviewers wrote; to make this product useful and to achieve more than satisfactory results for the very purpose of this product, you do need time, patience, and some light "crafting" ability. Me, I had been using the thermal beads for years to "fill in" a deteriorated front tooth that a very old school veneer had trashed and later fell off. The thermal beads result in a pure white color when cooled, requiring a "tea stain" to get it to a natural color, but they've always done the trick (Just fyi). However, being that the rest of my teeth are gar from desirable and costly implants are not quite an option, I've decided to bit the bullet (pun intended) and buy these. I had bought these as well as some thermal beads just in case. Was really a good idea. So- right off the bat; I am telling you to not even mess around with the adhesive strip they have. It's WAY TOO MUCH, and you'll save yourself a bunch of trial and error if you simply remove all of the pink adhesive from the jump. Soak in super hot water, as directed, and peel and/or scrape off ALL of the pink adhesive. It's easy to do (scrape off) with a spoon when still hot and squishy, but also after its cooled a bit to peel it off. Please do so gently, as the teeth themselves do become extra pliable when hot and seems possible that they can "rip" with extra/unnecessary roughness. So, after you remove the punk adhesive, it's time to sand. Yes, sand, because even without any adhesive they will still, more likely than not, look like horse teeth. Luckily, I had read the review of another fellow that did this as well, so I bought a rotary hand sander...lol. (Mini Cordless Rotary tool) I personally was okay with this additional $22 expense as I knew I would use it. I suppose you could use a file or even just sanding paper, but.... So, I took the rotary hand sander, placed the teeth bottom side up on my couch armrest with a towel underneath (I think it's important to have a soft but firm surface) and just lightly go back and forth over the whole back side, teeth and gums, as (for me at least) the protrusion (horse teeth look) actually comes from having "something extra" between your gums and your lips, as opposed to the teeth protruding). So, I sanded, going slowly and taking frequent breaks to check out my progress in the mirror. I didn't want to go to thin and risk A) trashing/ripping the product and B) having them be too thin as not to serve their purpose. I got to a good spot, or at least was anxious to give them a trial run. I then melted SOME of the pink adhesive and some thermal beads (equal part of both) in about a half cup of water that I heated up in a small glass bowl and microwaved for 30 seconds. Was perfect. I added the scraps of the pink adhesive and the thermal beads AFTER I microwaved the water and in a few seconds was able to mix (smush) the 2 together to make an opal like color (not the bubblegum pink of straight pink adhesive). I made a strip the length of the teeth and the size of about a spaghetti noodle. Lightly pressed onto the teeth (a bit lower than where the "teeth" meet the gum line. Be sure to push some into the "anchor holes) on each corner. I forgot to remove the pink adhesive from them when I first removed all of the adhesive in the beginning, but it wasn't an issue using a toothpick to pop it out. I then smashed it onto my teeth. You can be somewhat forcefull at this point, as I wanted to get them as close to my real teeth as possible. The good thing with having a mix with the thermal beads is that it doesn't harden as quickly and releases your teeth a bit easier than just the pink adhesive itself. Stays pliable a bit longer so you can get the right position and good fit. Make sure to line them up center though. Haha. As with me, because of my smaller deteriorated tooth, my "center" is a bit off, so I just lines them up with my lip crease.lol. Be sure to spread the adhesive around the bottom edge of ALL of your teeth. This will be helpful to form the "encasing" that your teeth will "snap into" when you use them. Make it smooth and thin, but not too thin. You want enough to hold, but not too thin where it will get all "bendy" and loose its shape. Again, the benefits of mixing with the thermal beads is that you get a light opal color as opposed to bubblegum pink, and even after it's fully "hardened", its still somewhat pliable; which is good so when/if your bottom teeth "hit" the excess adhesive that's on the bottom of some of your wider teeth, the adhesive "conforms" to your bottom teeth so you can actually close your mouth. **in a picture I pointed to a spot that my bottom tooth "hit". It's only visible if your up in someone's face. And quite frankly, if you're comfortable being that up close and personal with someone, then you shouldn't mind that person knowing you are wearing these...lol. Again, you have some leeway to mold/form it to your teeth without the risk of having them cemented in. Since it does take a tad bit longer to harden with the addition of the thermal beads, swish with some ice water and then gently remove. Drop them in the ice water to fully "harden" If there's excess that you need to get rid of, don't worry about it until after it's fully hardened. You can either clip it off or use your handy sander. I am really pleased! Although I may still mess with them to get them "perfect" as I feel that they still protrude a bit in the gum area, they really don't LOOK as if there's much of a difference in how I look with them in and with them out. Could just be mind over matter with the feeling of having "something there" as opposed to it looking like there is. Anyhoos, the color is acceptable as well. I only say acceptable as I personally would have liked a nice bright smile with this product, but they are 1000% better than my own so I'm happy (just being greedy I guess). I looked at them out in the sunlight and really, they are just fine. I do wonder about using peroxide or a teeth whitener, but may get disastrous results. I'll have to research the materials and any chemical reactions that may turn them yellow instead of white. I'm also wondering the effects of wine, coffee, and cigs... lol. I guess we'll just see. All I know is that on my upcoming trip to Greece next month I'll be able to SMILE in my pictures!!!! So, I've included the following pics. My teeth (ugh- sorry), how I look without them in mouth closed. How I look with them in mouth closed as to show any difference with puffiness/protrusion. Then SMILING with them in. Then pointing to the excess on the bottom of one of my teeth (which I may or may not mess with). A pic pointing to some stragglers that I'll just snip off. A pic of how the mold looks- (that your teeth will "snap" into, and the thin "lip" that goes around the bottom of the teeth that helps hold them on. I also might mess with this to see if the molds my teeth made are enough to keep them in place. I'd believe it just might. Also, be careful not to drink/eat very hot foods as this may melt the adhesive. (It happened to me when I used just the thermal beads to fill in my tooth, so I don't really know how much the pink adhesive will counter act that or give it a higher "melting point ". I mean, I can't imagine that many can tolerate the level of heat needed to melt it down, but you never know. Just be careful. I guess I'd suggest that if it does happen, you take a sip of tea or something and you "feel it happening", just leave it, don't move (lol) and drink some cold water... Anyway, I hopes this helps and helps you decide to give these a try. Seriously, if you have the means, know how, and patience, you WON'T REGRET IT!! ***please ignore my "sun-stache"..lol. ... and of course the nasty pictures of my mouth. I know pretty gross, I just wanted to show you how dramatic the change is.

This product is DANGEROUS!!! Be extremely careful in fitting these teeth...but even when you do get them fitted, they look like you have a football mouth guard in your mouth! But that aside, BE CAREFUL HERE. I followed the directions exactly. You are told to leave them in your mouth for a given amount of time and no longer, then remove them and let them cool. Imagine if you CAN’T remove them. These adhered to my teeth, and it took me over an hour to finally get them off. It was a very painful process, I felt like my teeth were being pulled...all of them! When I finally got them off, they had stripped what remaining enamel I had off. One tooth was broken in half. Another tooth was fractured. I got these because I can’t afford to go to a dentist. After getting them off, talking to people before was possible without them seeing the bad shape my teeth were in. AFTER this, there was no way to talk to anyone without covering my mouth!! I ordered the next most expensive brand and they worked out wonderfully, were fitted with no problem, and look far more real. Spend the extra $9. Bucks and get the Imako brand...you will be so glad you did. For those of us who cant affor a dentist, this is an investment so to speak. Spend a little more, but if you can’t BE CAREFUL...TAKE THESE OUT SOONER THAN THE DIRECTIONS SAY. I have given one star only because this review won’t get posted if I don’t. I would prefer no star!

Hii, I’m Mimi and I’m a 16 year old girl with microdontia on almost all of my teeth. I was born with an autoimmune disease that caused severe malnutrition throughout my childhood, therefore stunting my bone growth; including my teeth sadly. Being 16, and having messed up teeth, is honestly a massive dip in my confidence, and it’s been super hard for me. I’ve tried so many products to try to lengthen my teeth, and spent hours and hours working on them, but none of them ever worked or looked even close to being real. Dental work is also out of the question, being that I’m supposedly too young for it, on top of how outrageously expensive it is. I was really skeptical about this product, but I thought it was worth a try since I saw how many people were happy with it. It really is great, honest. It was really easy for me to use; probably since I have experience with trying other products, but I got them looking good in 15 minutes. I used a nail file to sharpen up the fangs a little, but other than that they look really good. Yes, there is an overbite, but it’s honestly not horrible and plenty of people have overbites so I’m picking and choosing my battles here. Here are my pros and cons. :) Pros: 1. Super pretty teeth, shiny and the gums look nice and pink 2. Easy to use 3. Make me feel happy to smile for the first time like ever 4. The pink adhesive is super strong! Stays in well and doesn’t wiggle as long as you push it against your teeth properly while molding 5. I think eating should be good, I tried chewing gum with them to test it out and they stayed in just fine; you do have to mainly chew with your back teeth, but I was a back teeth chewer anyway so it’s not much to me Honest Cons: 1. This might seem like a weird one, but they almost look TOO perfect. Like if you stare at them for too long they start to look a little uncanny; almost making you ask like who has teeth that nice? My bottom teeth are really nice so it doesn’t look as noticeable on me I don’t think, but if you have crooked bottom teeth it might look a little strange 2. They chip super easy, I haven’t used them much yet but I think with chewing you’ll have to be super careful. They chip about as easy as composite material though, and this is a fraction of the price, so the pretty smile is worth the extra care. 3. They look a little small on me. The teeth are kinda thin in my mouth; my teeth are naturally wider, so it looked strange to me. I wouldn’t say it’s the end of the world though, I think it’s just odd to me because I’m used to my teeth. Overall, these made me really happy, and for only spending $23 on them, I think they’re pretty great. :)

Waste of money first the teeth do not match up with normal adult teeth very small teeth small woman or child sized . Second the veneer is not malleable you can not shape it as they say to your mouth shape no matter how hot the water is I even tried leaving it in 3-4 x’s longer then stated to do so . Still will not reshape to fit mouth . Just a horrible product and waste of money . P.s. after getting this in hand also noticed this is designed basically for photo op to hide bad fronts you can not eat with this no way you can not use in any public setting total failure of a product.

I don't have any other products to compare it to, but I can say that the teeth seemed to work as advertised. My problem was that the teeth were too small. I have gum disease and my gums have receeded, leaving more of my tooth exposed to view. This isn't the fault of the manufacturer, but I wish that they offered some modifications for this. I could get the teeth to mold, but I could never get it back in my mouth after they hardened. BEWARE -DON'T LET THE TEETH HARDEN AROUND YOUR NATURAL TEETH I was trying to get the best fit around my natural teeth, and the material hardened in my mouth. I took a short road trip and left the teeth in. I stopped for a quick bite and coudln't when I realised that i couldn't get the teeth out. I figured I would try some hot tea and hoped that the material would soften enough to remove the teeth. It didn't. I ended up eatng a burger and fries with the teeth in. I thought, this isn't the worst thing that has ever happened to me. I planned to try to remove the teeth when I got home which would be in a couple of hours. I got home and proceeded to follow the directions found on the website. I tried using a small cloth dipped in hot water applied to the teeth. Once the material felt like it was becoming flexible, I proceeded to try to peel the teeth away from my natural teeth. The venneer ended up pulling away from the plastic base and breaking off. What was left was the plastic brace, now reshaped and sticking me inside of my jaw. I was able to get it to bend back toward the shape of my gumline, but was having no luch with the removal of the entire piece. The next day, I was determined. Hoping that I didn't create a costly and embarrasing trip to the emergency dentist, I tried to do the hot water thing again. This time I figured to use smaler pieces of cloth so that I could focus on the area where the material had bonded to my actual teeth. It became clear that the water i was using was not hot enough. Long story short, I ended up with minor burns on my lips and my gums are swollen from effort.

I've ordered a couple of these because I had my front teeth pulled out on top. I am in between getting fitted for dentures because the dentist office is booked out. In the meantime not having any teeth on top is embarrassing. So I ordered these and I used them to have a cosmetic front teeth look. I heated up the mold material in a cup of hot water like it says, then I put it in the fake plastic gum part of the teeth, and I pushed it up against my front teeth gums making sure to line it up in the mirror, I held it there for a few seconds for it to cool and harden, and then I had basically a fake top denture, strictly cosmetic cannot be used to eat with. I can put these on my gums and they will stay mostly but if I'm going to wear it for a while I use some of that like poligrip glue, and I will keep them in for a few hours if I'm out and about just to have a smile, I can say that's not what it says it's used for and it doesn't say to use on your gums, but it worked okay for me. sadly I ended up throwing away my first pair on accident I had them in my pocket and I threw my pocket stuff away. The little plastic case that is supposed to hold the little fake teeth always breaks, I've had them twice or three times and each time the little case broke. I end up having to keep it in something else which is not convenient and how I threw away my first set because I had them wrapped in tissue after I took them out and then I forgot they were in the tissue and threw it away.. The second time I just lost a broken plastic piece so I kept them in a Little denture container but those are huge compared to these tiny little front teeth piece. Now this third pair when the little case broke I just decided to wrap it with tape and now I keep them in the little case they came in, but every time I open it to get them out or put them away I have to wrap the tape back around it, thankfully the tape has kept stickiness enough to hold it closed without having to replace the tape over and over. But that's why I gave it four stars. It's a great help to have in between, or I guess if your front teeth were completely messed up and you wanted to cover them up this would work for that maybe, but you should try it, be careful and follow the directions as best as you can.

You get what you pay for, and even when you go to the dentist, everything’s custom fit to your mouth. So these took some customization to work, I had to sand down the gum line, with my dremel. I also purchased additional wax balls on Amazon, because what they provide in the set it’s more like a starter kit. Not sure how long it’s supposed to last, but I like having backup molds, and I eat with mine in, so I’ll have to changeout my wax more often than someone who takes them out. I guess that’ll depend on your situation, my teeth underneath are doing all the work, so I’m able to getaway with it. I can repeat the entire process for replacing the wax in about 5 minutes, getting the veneers to look good, I’ve only had to mess with the first time, now I just mess with the wax. So if it takes you a little time at first, don’t get discouraged, once you get the veneers to your liking, u finished the hard part, the wax you can heat up over and over again to get it to your liking Make sure to put the veneers in the hot water when you first get them, so you can mold them over the shape of your teeth. Like I said, I only had to do that once, and haven’t done it since. This products for someone looking for a cheap alternative, to buy more time for dental work, or a quick fix for self confidence. Like a messed up tooth, self conscious about a gap, or even if it’s the color and you want something brighter white. I’m sure others do the same, but I always was very careful about the way I spoke to ppl because of two of my upper teeth that I damaged in an accident. Prior to these whenever I was talking to someone I didn’t know especially, I was constantly making sure my lips didn’t expose my upper teeth. Smiling, forget about it, a smirk was the most you’d get out of me. Since I purchased these veneers, I can’t believe how much of my time I wasted worrying about my smile. SMH, I wish I knew about these sooner. If you end up getting them, invest a little time on social media, watching ppl’s reviews. That’s how I figured out what worked for me. They helped me make these veneers look natural instead of a mouthguard. I don’t work for them, or get annything in return for this. I’m just happy for the first Xmas in three years, my teeth will be the last thing on my mind. I went ahead and purchased a backup set, that way if anything ever happens I have a backup already made and ready to go. Not sure how I can help anyone anymore, but if I think of anything I’ll update my review? Wish you the best, and fingers crossed you get the same relief, don’t forget these aren’t dentures, and you aren’t going to get a perfect fit, you need to do that, but with a little time it’s possible.

This is a 'no' from me. Although the product was easy to use - with simple instructions that did work the way they said it would, the final product wasn't good. Pros: Great easy to follow instructions, product is of good quality and the shade matched well. Cons: When you fit the veneer onto your teeth, you have a fairly huge overbite that doesn't look at all natural. I did try several times to perfect the placement, and managed to get the veneer as close as possible to my teeth, but still this was a problem. You could take a picture of yourself if no one knew what you looked like before and they look great. You couldn't wear them out with family or to work and not look ridiculous. This was a nice try, but doesn't quite do the job.