Spyder Auto Spyder 5011893 Scion XB 03-07 Projector Headlights - LED Halo - Black - High H1 (Included) - Low 9006 (Included)

Really excited about the overall look of these lights, definitely spruce up the look of my xB, and good replacement for originals, one of which was very cloudy. They fit fine. All harnesses plugged in properly and I was able to just insert the turn signal lamp directly into the port. Be aware that on a Scion xB, you will have to partially remove the front bumper, entire grill, in order to access screws to remove old lights and install new ones. This only took me a little while though, not a big deal, watch a YouTube video.Wiring the Halo LED rings is a bit more work. I wanted these on when the car was on, so had to find a ACC 12V line, which ended up coming from under the dash on the radio harness! Big pain. The wires coming from the halo lights are too short and you'll need extra length just to ground them,not to mention run power. I also recommend a fuse harness, just to be safe.So some CONS: washed the car, after having these in only a few days and notices fog on the inside. That was alarming. I'm hoping the manufacturer or seller can address this and alleviate my concerns. I will keep an eye on this and post pictures to amend review where necessary.Only other issue is that after all the hassle of wiring the Halo LED lights, they are pathetically dim and week. You can hardly see these on in the daylight. I was HIGHLY disappointed in this. Again, maybe someone can help me out here, but I've got 12V going to them, just aren't bright at all. Look great in the garage, but what's the point.

Spyder Auto Scion XB Black Halogen Projector Headlight This item was very easy to install. Took about 2-3 hours for me personally but most of that was soldering and securing wiring (soldering isn't necessary, but I'm a bit of a perfectionist). The bulbs that came with were not too bright bit I changed out with some 1200 lumen LED bulbs behind projectors. HID bulbs are not allowed in these housings for heat reasons I believe, but LED bulbs are no hotter than halogen so I went for it. BIg difference in brightness. Only other thing I'd recommend is maybe using some sort or sealant around seam of the headlight to lessen the possibility of moisture being introduced. I have not had an issue but I wanted to be sure I don't in the future. You get what you pay for and I think for the price of these headlights, they are a great buy and a huge upgrade from stock. Personally, as a buyer, I rely on other buyers’ reviews before making my purchases. I only hope this review was useful to you.

Packaged well , easy to install. Works as it should, looks great. Only negative halos are very dim and near impossible to see during the day light hours.

I installed these earlier today and couldn't be happier with how much nicer they are than the OEM headlights. See the included photos for before, during, and after installation.The installation process took some time, mostly due to having to splice the halo lamps into the correct wires. You will have to remove the front bumper and grille, but there's no need to lift the car. The lamps came with high beam and regular lamps already installed, but you'll have bring over the turn lamps from the OEM headlight you're removing. All in all, it took me approximately 3 hours to install, though I was enjoying a sunny afternoon as I worked.

Se ven geniales pero tienen un defecto y es que por más que intento ajustar la dirección del alumbrado siempre se queda igual. Las luces largas alumbran muy a la izquierda de ambos focos.

They look super clean and the high beams come super bright but the halogens need to be replaced because they aren't the same color as the rings the brights aren't the same color but I'm gonna keep them because they work so well! Overall great headlights would recommend.

They look much better than stock housings in my opinion. Love the halo look on my XB.

Makes the toaster look 10 times better. I totally recommend this those looking to style out the XB